Auf Lager

Auf Lager

Auf Lager

Auf Lager

Auf Lager

Axiom Fiber Active Optical Cables (AOC) are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible Active Optical Cables perform, fit and function identically when compared to "Original" cables. Axiom brand cables also function with other brands within the same network.100% Guaranteed Compatibility in all OEM applicationsPart number and unique product serialization; Eliminates any network communication conflicts and provides easy identificationFully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platformsOriginal Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only.

Auf Lager

The T020-001-LC50 FC to LC 50/125 Adapter converts a native FC fiber female port on the Tripp Lite T020-001-PSF Multi-Function Optical Fiber Cable Tester to an LC female port for 50/125 multimode cable testing. "50/125" is clearly labeled on the unit to differentiate the T020-001-LC50 from other adapters. Included dust caps keep the connectors clean when not in use.

Auf Lager

Axiom Fiber Active Optical Cables (AOC) are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible Active Optical Cables perform, fit and function identically when compared to "Original" cables. Axiom brand cables also function with other brands within the same network.100% Guaranteed Compatibility in all OEM applicationsPart number and unique product serialization; Eliminates any network communication conflicts and provides easy identificationFully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platformsOriginal Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only.

Auf Lager

The Monoprice 50ft Optical Toslink 5.0mm OD Audio Cable is the perfect solution for achieving high-quality audio transmission over long distances. With its generous 50ft length, you can easily connect your audio devices without worrying about signal loss or degradation. The cable's 5.0mm outer diameter ensures durability and flexibility, making it easy to route and install in any setup. Designed for convenience, this audio cable features Toslink digital audio connectors on both ends, ensuring a reliable and secure connection. Whether you're connecting your audio system to a TV, gaming console, or soundbar, this cable delivers crystal-clear sound with minimal interference. Installation is a breeze - simply plug and play. No additional software or drivers are required, saving you time and effort. Experience immersive audio with the Monoprice 50ft Optical Toslink 5.0mm OD Audio Cable and enjoy your favorite music, movies, and games with exceptional clarity and precision. Upgrade your audio setup today and enjoy the benefits of reliable, high-quality audio transmission with the Monoprice 50ft Optical Toslink 5.0mm OD Audio Cable.

Auf Lager

Auf Lager

The ENET 40GBASE-SR4 QSFP+ Module is the perfect solution for businesses seeking high-speed and reliable data transmission. With its advanced 40GBase-SR4 network technology, this module ensures seamless connectivity and efficient performance. The 850nm fiber optic cable standard guarantees a stable and secure connection, while the MPO/MTP connector type simplifies installation. With a maximum distance supported of 492.13 ft, this module offers flexibility in deployment, making it suitable for various networking environments. Additionally, it is TAA compliant, making it an ideal choice for government and military applications. Upgrade your network with the ENET 40GBASE-SR4 QSFP+ Module and experience enhanced speed, reliability, and security.

Auf Lager

VFLs work well for exposed lengths of fiber near a patch panel by illuminating bad connections and breaks. They are not very helpful for cable runs more than a few meters, or when the cable not visible or accessible, or when the laser light can't penetrate the jacket. Optical Time Domain Reflectometers (OTDR) provides graphical data and analysis along the entire length of a cable, way beyond the reach of a VFL, but they can be expensive and require more time to and skill to operate. Fiber QuickMap fills the gap between a VFL and an OTDR. These models have the simplicity of a VFL, and provide distance and power information on high losses, breaks, and the end of the fiber. They also identify live fiber

Auf Lager

Flexible and non-metallic, The LOOP® provides sturdy, reliable support of CAT 5, 6 or 7 - or fiber optic cable without sagging, bending or damaging the cable! The LOOP holds up to a 5" diameter bundle of cable. Fast and easy to use - cheaper than cable trays Single or multiple LOOP hangers mount in a variety of ways and rotate to any angle UL/CSA Listed for environmental air handling spaces per 2008 NEC code requirements 300-22(c). Available with or without UV rating

Auf Lager

Axiom offers a full line of efficient & cost effective cabling solutions for your networking project. We use only the finest components and the latest construction technologies to optimize cable performance and ensure compliance to industry specifications for each cable and its designated application. We offer a variety of solutions including fiber, infiniband, antenna & stacking cables. Whether you're upgrading components or installing a brand new network, you'll receive the highest quality connectivity products, a Lifetime Warranty and free technical support.

Auf Lager

Auf Lager

Auf Lager

This is an 1xASC (male) to 32xASC (male) yellow simplex riser-rated fiber splitter box. OS2 is a standard single-mode optical fiber commonly used with wavelengths of 1310nm and 1550nm (9/125 microns), and has a maximum attenuation of 1dB/km. The OS2 standard is defined in ISO/IEC 11801. This optical fiber, nonconductive, riser (OFNR) cable is best suited for use in interior fiber-optic applications. A duplex cable is a two-strand fiber optic patch cable that works best with transceivers that both transmit and receive. Our patch cables are 100% compliant for all of your networking needs. Our products are guaranteed by federal law to not affect or void OEM warranties.

Auf Lager

This is a 1000ft non-terminated yellow OFNR (Riser-rated) 2-strand duplex fiber patch cable. OS2 is a standard single-mode optical fiber commonly used with wavelengths 1310nm and 1550nm (size 9/125 microns), and has a maximum attenuation of 0.4dB/km. The OS2 standard is defined in ISO/IEC 24702. Our patch cables are 100% compliant for all of your networking needs. Our products are guaranteed by federal law to not affect or void OEM warranties.

Auf Lager

Keystone Jack for fiber optic cables with SC type connectors. For use with fiber optic networks.

Auf Lager

Axiom Fiber Active Optical Cables (AOC) are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible Active Optical Cables perform, fit and function identically when compared to "Original" cables. Axiom brand cables also function with other brands within the same network.100% Guaranteed Compatibility in all OEM applicationsPart number and unique product serialization; Eliminates any network communication conflicts and provides easy identificationFully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platformsOriginal Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only.

Auf Lager

Axiom Fiber Active Optical Cables (AOC) are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible Active Optical Cables perform, fit and function identically when compared to "Original" cables. Axiom brand cables also function with other brands within the same network.100% Guaranteed Compatibility in all OEM applicationsPart number and unique product serialization; Eliminates any network communication conflicts and provides easy identificationFully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platformsOriginal Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only.

Auf Lager

Auf Lager

This OM3 Duplex Multimode Fiber Optic Cable is ideal for connecting 10GBase-SR, 10GBase-LRM, SFP+ and QSFP+ tranceivers for 10 gigabit network connections. This cable provides backward compatibility with existing 50/125 equipment and the performance headroom required to support LED and VCSEL laser light sources, and 10 gigabit ethernet applications.

Auf Lager

Designed to detect fiber breakpoints, fiber leaks, poor connections, and stress points, this visual fault locator is perfect for field personnel detecting faults in fiber optic cables. This VFL Kit features the following: Includes adapter for 1.25mm LC connectors 650 nm Class IIIA laser diode identifies faults in single and multi-mode fiber up to 3 miles long Universal connector accommodates 2.5mm ferruled connectors, such as FC, SC, and ST connectors Has three different modes: Continuous wave, pulsing, and slower pulsing mode Works in OTDR dead zones and is used for end-to-end visual fiber identification Light and portable pen-style design is perfect for on the go use 60 hours of battery life powered by two AAA batteries (included)

Auf Lager

This OM3 Duplex Multimode Fiber Optic Cable is ideal for connecting 10GBase-SR, 10GBase-LRM, SFP+ and QSFP+ tranceivers for 10 gigabit network connections. This cable provides backward compatibility with existing 50/125 equipment and the performance headroom required to support LED and VCSEL laser light sources, and 10 gigabit ethernet applications.

Auf Lager

Available in 8 feet lengths, this 3/4 inch wide by 1/2 inch high single channel raceway provides an excellent solution for routing and concealing low voltage and fiber optic cabling along walls. Its one piece design allows for an easy installation even when filled to capacity. Accommodates a wide variety of outlet boxes.

Auf Lager

The Arlington TL25 Loop Cable Hanger is the perfect solution for organizing and securing your cables. With its loop size of 2-1/2", it can easily accommodate a bundle of CAT 5 or fiber optic cables without causing any damage. This cable hanger is not only easy to use, but it is also more cost-effective than traditional trays. Made from flexible and non-metallic materials, it provides a versatile mounting option that can rotate to any angle, ensuring optimal cable management. The TL25 holds the same amount of cables as a J-hook, but at half the cost, making it a smart choice for any project. Plus, it is UL and CSA certified, guaranteeing its quality and safety. Upgrade your cable organization with the Arlington TL25 Loop Cable Hanger and enjoy a clutter-free and efficient workspace.

Auf Lager