TRENDnet TPE-3018LS 18端口千兆智能监控交换机，16个千兆PoE+端口，2个共享千兆端口（RJ-45或SFP），220W PoE预算，远程PoE+，VLAN，QoS，LACP，ONVIF 品牌名称：TRENDnet 将TRENDnet翻译为：趋势科技
TRENDnet TPE-3018LS 18端口千兆智能监控交换机，16个千兆PoE+端口，2个共享千兆端口（RJ-45或SFP），220W PoE预算，远程PoE+，VLAN，QoS，LACP，ONVIF 品牌名称：TRENDnet 将TRENDnet翻译为：趋势科技
TRENDnet TPE-3018LS
- Free Shipping
- Lifetime 保修
- 30天退货
- 碳中和
产品关键特征
- 16 x 千兆 PoE+ 端口，2 x 共享千兆端口（RJ-45 或 SFP），220W PoE 供电预算
- 易于使用的基于 Web 的管理界面，支持 IPv6、LACP、VLAN、QoS 和 IGMP Snooping，在 10Mbps 情况下将 PoE+ 信号扩展至 656 英尺/200 米
- 前面板 4 位 LED 显示器提供 PoE 供电统计信息，简化配置和网络监控的监控模式 GUI，支持 ONVIF 兼容 IP 摄像头和 NVR 的设备发现
- 每个端口的带宽控制，802.1Q、MAC、监控和语音 VLAN 支持，带队列调度支持的 IEEE 802.1p QoS，智能风扇，36Gbps 交换容量
- 上传建筑楼层平面图以创建监控设备的 E-地图，更改 IP 摄像头 IP 地址设置，升级 IP 摄像头固件，更改 IP 摄像头管理员用户名和密码
产品
TRENDnet
TPE-3018LS
Smart Surveillance Management
These ONVIF managed switches are optimized for the surveillance industry; Surveillance mode provides a graphical panel interface with detailed information about the switch and each connected device.
Integration flexibility
Managed switch features include access control lists, VLANs, IGMP snooping, QoS, RMON, SNMP, and syslog for flexible network integration and monitoring.
Active PoE Device Check
PD alive Check is an automated PoE self-healing switch feature that attempts to recover a non-responding PoE device connected to the switch. If a PoE device such as a PoE camera is unresponsive, the ONVIF compliant switch will automatically reset the PoE port to attempt to recover the device.
TRENDnet Smart Surveillance Switches: TPE-3012LS & TPE-3018LS
TRENDnet's Gigabit PoE+ Smart Surveillance Switch series is designed to simplify the installation and management of surveillance networks, especially for integrators and installers. These ONVIF switches are optimized for the surveillance industry; surveillance mode provides a graphical dashboard interface with detailed information about the switch and each connected PoE device. Connect ONVIF compliant IP cameras and NVRs for more advanced capabilities such as changing device IP settings, and to view individual IP camera video within the switch GUI. The Smart Surveillance Switches are also PoE self-healing switches featuring PoE device auto-recovery and power scheduling.
Installers and integrators can save on equipment costs and reduce installation time with TRENDnet's Gigabit PoE+ Smart Surveillance Switches by delivering up to 30W per port of PoE power and data over existing Ethernet cables. Available PoE port controls include enabling and disabling PoE, PD alive check, and power scheduling. PD alive check is an automated PoE self-healing switch feature that attempts to recover an unresponsive PoE device connected to the switch. If a PoE device such as a PoE camera becomes unresponsive to pings, the ONVIF compliant switch will auto-reboot the PoE port in attempt to recover the device.
These PoE+ ONVIF switches feature a 4-digit LED display showing total PoE power, available power, and power-per-port. They also support long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps. TRENDnet's Gigabit PoE+ Smart Surveillance Switches also feature SFP slots to support long-distance fiber networking applications.
Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring, making this ONVIF switch a powerful SMB network solution. Improve voice performance by isolating and prioritizing VoIP traffic from normal data traffic with the easy-to-use voice VLAN feature.
- 16 x Gigabit PoE+ ports
- 2 x Shared Gigabit ports (RJ-45 or SFP)
- 220W PoE power budget
- Easy-to-use web-based management interface
- Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping
- Extend PoE+ signal up to 656 ft./200m at 10Mbps
- Front panel 4-digit LED display provides PoE power statistics
- Surveillance mode GUI for simplified configuration and network monitoring
- Device discovery for ONVIF compliant IP cameras and NVRs
- Upload building floorplans to create an E-map of surveillance devices
- Change IP camera IP address settings
- Upgrade IP camera firmware
- Change IP camera administrator user name and password
- Bandwidth control per port
- 802.1Q, MAC, Surveillance, and Voice VLAN support
- IEEE 802.1p QoS with queue scheduling support
- Smart Fan
- 36Gbps switching capacity
- NDAA / TAA compliant (U.S. and Canada only)
Return Policy |
Time to Return |
|
Standard Return Policy |
We offer a hassle-free 30-day returns policy for domestic (US) orders, excluding non-refundable items. Refund or Replacement within 30 days of the delivery date. All products that fall under the Standard Return Policy qualify for our 30-Day Hassle-Free Returns. Please see the section above for more details. |
|
Replacement Only Return Policy |
Replacement within 30 days of the delivery date. |
|
Manufacturer Only Return Policy |
Covered by the manufacturer's warranty. Please refer to the terms and conditions for the manufacturer's warranty or contact the manufacturer. |
|
Holiday Extended Return Policies |
Extended Holiday Return Policy.Qualifying purchases of products displaying the " Extended Holiday Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Refund or Replacement until January 31, 2024. Extended Holiday Replacement-Only Return PolicyQualifying purchases of products displaying the " Extended Holiday Replacement-Only Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Replacement until January 31, 2024. |
相似产品
