Cisco Aironet Power Injector products increase the deployment flexibility of Cisco Aironet wireless access points and bridges by providing an alternative powering option to local power, inline power-capable multiport switches, and multiport power patch panels.

มีสินค้าในสต็อก

มีสินค้าในสต็อก

มีสินค้าในสต็อก

มีสินค้าในสต็อก

This Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using standard Ethernet cable, at distances of up to 100 m (330 ft.).The PoE midspan is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model.Convenience and cost savingsThis versatile PoE injector lets you connect a PoE-powered device (PD) to a non-PoE network switch, so you can avoid the expense and aggravation of replacing your existing switch with a PoE-enabled model. It supplies up to 30 watts of power, so you can easily power and access a high-power PoE-compliant device, such as an IP camera or a wireless access point (WAP), using traditional copper (RJ45) Ethernet cable. The midspan injector makes it easy to extend data and power connectivity to your PoE+ device across long distances, even in a remote location where a typical power outlet isn't available.Easy to set up in mixed environmentsYou can integrate this compact injector discreetly into a variety of environments. It features a surface-mountable housing that's perfect for installing on walls or under a desk, but it's also palm-sized, for use on desktop surfaces.Plus, with plug-and-play operation, you can enjoy fast and hassle-free setup without disrupting your workflow.Intelligent power allocationNot sure which class your PoE device is? The Gigabit PoE+ injector automatically detects the power requirements of your connected PoE PD, and delivers the appropriate level of power without damaging your device.The POEINJ1G is backed by a StarTech.com 2-year warranty and free lifetime technical support. More from the Manufacturer

มีสินค้าในสต็อก

Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including: airFiber® airMAX® EdgeMAX® mFi® UniFi® AP UniFi Protect / airVision® UniFi LED U Fiber ProtectionUbiquiti PoE Adapters provide a variety of features to help protect your PoE devices: Surge protection Clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter,TOUGHCable TM , and TOUGHCable Connectors.

มีสินค้าในสต็อก

Single port High PoE midspan, 60 W. Compliant with IEEE 802.3at and 802.3af. The midspan can be installed on a wall, shelf or DIN rail with an accessory DIN clip.

มีสินค้าในสต็อก

AXIS T8144 60 W Industrial Midspan is an industrial grade 1-port midspan offering an easy, fast and cost-effective solution for powering network products. With a wide operating temperature, from -40 °C to 75 °C (-40 °F to 167 °F), AXIS T8144 is robust in harsh environments. A typical configuration would be to enable PoE to a non-PoE based system (switch, 3G/4G router, or wi-fi access point) creating a compact and effective solution. AXIS T8144 is ideal for mounting in cabinets or on DIN rail, has dual DC inputs for power redundancy and supports all PoE devices.

มีสินค้าในสต็อก

มีสินค้าในสต็อก

Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including: airFiber® airMAX® EdgeMAX® mFi® UniFi® AP UniFi Protect / airVision® UniFi LED U Fiber ProtectionUbiquiti PoE Adapters provide a variety of features to help protect your PoE devices: Surge protection Clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter,TOUGHCable TM , and TOUGHCable Connectors.

มีสินค้าในสต็อก

Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including: airFiber® airMAX® EdgeMAX® mFi® UniFi® AP UniFi Protect / airVision® UniFi LED U Fiber ProtectionUbiquiti PoE Adapters provide a variety of features to help protect your PoE devices: Surge protection Clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter,TOUGHCable TM , and TOUGHCable Connectors.

มีสินค้าในสต็อก

Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including: airFiber® airMAX® EdgeMAX® mFi® UniFi® AP UniFi Protect / airVision® UniFi LED U Fiber ProtectionUbiquiti PoE Adapters provide a variety of features to help protect your PoE devices: Surge protection Clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter,TOUGHCable TM , and TOUGHCable Connectors.

มีสินค้าในสต็อก

มีสินค้าในสต็อก

The twenty four ports PoE midspan provides up to 60 Watts of power over Ethernet and offers a IEEE 802.3bt-compliant solution for remote powering of current as well as emerging high power applications. The PD-9524GC is designed specifically to power IEEE 802.11 access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients and other high power Ethernet end terminals with 60W of power.

มีสินค้าในสต็อก

The Ubiquiti Instant 802.3af Passive PoE to 802.3af Adapter (INS-3AF-O-G) is the perfect solution for powering your devices with ease. This adapter allows you to convert 802.3af Passive PoE to the 802.3af standard, ensuring compatibility with a wide range of devices. With surge protection built-in, you can rest assured that your connected devices are safe from power fluctuations. Featuring input and output ports that support 10/100/1000Base-T Ethernet, this adapter provides fast and reliable connectivity. It supports a maximum output current of 500mA, delivering ample power to your devices. The input voltage of 48V DC and maximum output voltage of 24V DC ensure efficient power delivery. Designed with convenience in mind, this adapter is lightweight and compact, making it easy to install and transport. Manufactured by Ubiquiti, a trusted brand in networking solutions, you can rely on the quality and performance of this adapter. Plus, it comes with a 1-year limited warranty for added peace of mind. Certified to meet IEEE 802.3af standards, this adapter is guaranteed to provide reliable power to your devices. Upgrade your power solution with the Ubiquiti Instant 802.3af Passive PoE to 802.3af Adapter and experience seamless connectivity and enhanced performance.

มีสินค้าในสต็อก

The EnGenius EPA5090HBT PoE Injector delivers 90-watts of power and 2.5Gb data communication to compatible network devices up to 328 feet (100m) over Cat5e cable. Compact design with IEEE802.3bt compliance offers easy installation while providing built-in power protection to preserve valuable equipment.IEEE 802.3bt Type 3 & 4 compliant IEEE 802.3af/at backward compatible Backward compatible for legacy PoE while future proofing network with up to 2.5Gb bandwidth Supports 10/100/1000 Mbps and 2.5 Gbps applications Output power up to 90W over four pairs with auto-detection on power requirement Leverage energy efficient PoE of up to 90W with full power capabilities Single-port PoE Midspan Injector flexible design allows for either desktop or surface-mount use Fan-less design ideal for silent operation Simple plug-and-play installation

มีสินค้าในสต็อก

The D-Link 1-Port Gigabit 802.3at PoE Injector (DPE-301GI) is the perfect solution for powering and connecting your PoE devices. With its compact and lightweight design, it offers easy installation and seamless connectivity. This PoE injector supports Gigabit Ethernet for high-speed data transfer, ensuring efficient performance. With a maximum output power of 30W, it delivers reliable power to your devices. Made by D-Link, a trusted brand in networking solutions, you can trust the quality and reliability of this product. Whether you need to power IP cameras, wireless access points, or other PoE devices, the D-Link 1-Port Gigabit 802.3at PoE Injector is the ideal choice. Upgrade your network with this reliable and efficient PoE injector today!

มีสินค้าในสต็อก

Sends data and power over a single Ethernet cable Use to power IP phones, security cameras, wireless access points, IP print servers, and other 802.3af-compatible equipment Avoid the cost and hassle of installing AC power at a remote camera or door scanner Supports 10/100/1000-Mbps midspan data connections on RJ-45 input/output Protection includes overvoltage/current overload and short circuit protection on the power output (per 802.3af specifications) Diagnostic LED indicates adverse power conditions Detects unstable current measurements, low voltage, incorrect resistive signature, and more Simple plug-and-play installation Compact, weighs less than half a pound and can be easily wall-mounted RoHS compliant The device has Data In RJ-45 (10/100/1000) and Data/PoE Out RJ-45 (10/100/1000). PoE midspan injectors are used in Enterprise applications to power VoIP phones, wireless access points, IP security cameras and more. PoE injectors add power to the Ethernet link and avoid upgrading switch infrastructure. PoE enables you to avoid installing AC power at a remote powered device. This device is designed for desktop or panel mounting and includes a 100-240VAC internal power supply delivering 15W per port.

มีสินค้าในสต็อก

Overview Microsemi's PD-9001GO Power over Ethernet (PoE) single-port midspan offers a cost effective, fully IEEE 802.3af/802.3at compliant solution for outdoor installations, guaranteeing 30 Watts of power and ensuring safe and reliable operation in outdoor environment of any standard PoE data terminal. It allows wireless LAN access points, security network cameras and other IP terminals to receive power, along with data, over standard Ethernet cables, leaving network infrastructure completely unaltered. The PD-9001GO also offers surge protection for both the AC and the PoE ports ensuring the indoor equipment is protected from outdoor surges.

มีสินค้าในสต็อก

TRENDnet's Gigabit Ultra PoE Injector, model TPE-117GI, combines electrical power with a gigabit network connection to produce a gigabit Ultra Power over Ethernet signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your Ultra PoE, PoE+ and PoE devices. Use an existing open port from a non-PoE switch to save installation and equipment costs when installing PoE access points and IP cameras. Converts a non-PoE gigabit port to an Ultra PoE gigabit port Supplies PoE (15.4W), PoE+ (30W) or Ultra PoE power (60W) Network a PoE device up to 100m (328 ft.) Save on installation and equipment costs Supports IEEE 802.3af / 802.3at / Ultra PoE NDAA compliant More from the Manufacturer

มีสินค้าในสต็อก

AXIS T8504-R Industrial PoE Switch is a 4-port managed industrial PoE++ Gigabit switch. In addition, the switch is equipped with two RJ45 and two SFP data ports that allows for extra devices to be connected. For high demanding installations The ruggedized industrial switch is developed for challenging environments, when mounted inside a surveillance cabinet. It is designed to withstand shock, vibrations and temperatures from -40 °C to 75 °C (-40 °F to 167 °F), making it perfect for high demanding installations such as alongside highways and tunnels. Easy to install and configure AXIS T8504-R Industrial PoE Switch, is easy to install by using standard Axis tools as AXIS IP Utility and AXIS Device Manager. AXIS T8504-R also comes with an individual password, an easy to use setup wizard, and a comprehensive set of configuration tools such as an integrated DHCP server for automatic assignment of IP addresses. It also allows for even more advanced network configuration such as Rapid Ring Protection Protocol, VLAN, QoS, Security, and Spanning tree to further optimize the total solution. Total overview with unique user interface AXIS T8504-R uses the same intuitive administrator interface as AXIS T85 PoE Network Switch Series .The unique web graphic user interface offers a graphic topology for easy overview of all devices in the system. The graphic user interface provides information, status and notifications about connected devices. It allows for management of all connected devices, reboot of cameras in the system, monitoring of network traffic, cable diagnostics and much more.

มีสินค้าในสต็อก

The Single Port PoE+ (Power Over Ethernet) Injector delivers both data and electrical power to PoE enabled devices using standard Ethernet cable. This eliminates the need to place devices (i.e. wireless access points) near a power outlet, allowing for greater installation flexibility, while also reducing installation and labor costs. PoE enabled devices may be placed up to 328 feet (100 meters) away from the POE Injector. Power Cord included in this kit. Your Ethernet cable is required.

มีสินค้าในสต็อก

EnGenius PoE Adapter is easily to power and to network over Ethernet for increasing scalability and reducing installation time and cost.EPA series is a single-port Power over Ethernet (PoE) adapter for use with gigabit system. The ideal solution could assist installers to solve the limitation in designing networks is the availability of power source. The EnGenius PoE adapter allows delivery of both data and power to an Passive 54V- compatible Access Point or device over a single Ethernet cable, allowing deployment of them exactly when users needed to provide the best wireless coverage and at much lower installation cost.Outdoor Networking Facility and Low Port Density InstallationsThe EPA5006GP PoE adapter is Passive 54V, with disconnect, short -circuit and overload protection to assure the securable and reliable connection for Access Points or other PoE devices. By sending maximum 54V/0.6A output, Ethernet terminals which need more power such as wireless LAN high power device, IP media center, and web camera are powered remotely.

มีสินค้าในสต็อก

Now You Can Add a PoE Device to Your LAN Without a PoE SwitchAdd a surveillance camera, wireless access point, VoIP phone, outdoor kiosk, smart lights or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn't support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE++ injector to send 60W of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling. It is recommended for Wi-Fi applications that require more than 30W of power. Saves You Time and Money on Unnecessary Equipment UpdatesThis compact PoE plus injector delivers 10/100/1000 Mbps (1 Gbps) of data and up to 60W of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don't need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor. Expand Your PoE Network Up to 328 ft.The NPOEI-60W-1G delivers both power and data to any IEEE 802.3af (PoE), 802.3at (PoE+) or 802.3bt (4PPoE) device up to 328 feet (100 meters) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, high voltage and overloads. Simple Plug-and-Play Installation Has Your Device Connected in MinutesNo configuration or software is required to add the NPOEI-60W-1G to your LAN (local area network). Just connect your switch or Ethernet network to the shielded RJ45 LAN port and your PoE device to the shielded RJ45 PoE port using existing Cat5e/6/6a cable. The included terminal block offers dual primary and redundant power inputs. DIP switches and LEDs help you find the right settings for your application. The NPOEI-60W-1G automatically detects which connected devices are compatible. Designed for Installation on a DIN RailA DIN rail kit is included for mounting the IP30-rated metal housing on a well-grounded corrosion-free rail. The fanless design is ideal for silent operation.

มีสินค้าในสต็อก

SI-IES-121D-LRT has one SFP slot and two RJ45 ports. The RJ45 ports support 802.3at (PoE+), and can provide 30W on each copper port for high power applications. The SFP slot provides more flexibility when planning and implementing the network. The slot can accept either a 100m or 1000m SFP module. This makes it possible to easily change the transmission mode and distance of the connection by using a different module. The SFP module is hot-swappable, and there is a dip switch to adjust the LFP function

มีสินค้าในสต็อก

Deliver power and data to four Power over Ethernet devices using this wall-mountable PoE+ midspan hub. This Gigabit midspan PoE+ injector is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model.It supplies up to 30 Watts output to each port, so you can easily power and access up to four high-power PoE-compliant devices - such as IP cameras - using standard Ethernet cable.More power, with less cost and hassleThis versatile midspan PoE+ injector is suited for almost all PoE device classes, including wireless access points, as well as IP phones and cameras. The high-power PoE+ injector offers 120W total power distribution and delivers full power - up to 30.8W - from each port. Now, you can easily scale and power your PoE+ devices across long distances, even in remote locations where a typical power outlet is unavailable.Plus, the cost-effective Power over Ethernet+ injector lets you connect your PoE-powered devices (PDs) to a non-PoE-capable switch, avoiding the expense and aggravation of upgrading your existing switch to a PoE-enabled model.Easy to set up in mixed environmentsThis injector is the perfect solution for a variety of environments. It features a wall-mountable rugged metal casing, but is palm-sized making it perfect for desktop placement too.With plug-and-play operation, you can enjoy fast and hassle-free setup without disrupting your workflow.Convenient, protected connectionsNot sure which class your PoE devices are? The Gigabit midspan PoE+ injector automatically detects the power requirements of your PoE PDs, and delivers the appropriate level of power without damaging your devices.With integrated circuit protection between each port, your devices are also protected from power interference.The POEINJ4G is backed by a StarTech.com 2-year warranty and free lifetime technical support. More from the Manufacturer

มีสินค้าในสต็อก

Power up your network devices with the Cisco ISR-1100-POE4 PoE Injector. This compact and reliable injector offers 4 ports of 802.3at POE+ power, providing seamless power distribution for your network infrastructure. With Cisco's reputation for quality and reliability, you can trust in the performance of this PoE injector. Its compact design makes it easy to install and integrate into your network setup. Compatible with the Cisco 1100-8P Integrated Services Router, the Cisco ISR-1100-POE4 offers versatile compatibility for your network needs. With a limited warranty of 1 year, you can have peace of mind knowing that your investment is protected. Power up your network with the Cisco ISR-1100-POE

มีสินค้าในสต็อก

The Black Box PoE+ midspan injectors are used in Enterprise applications to power VoIP phones, wireless access points, IP security cameras and more. PoE+ injectors add power to the Ethernet link and will help you avoid upgrading non-PoE switch infrastructure. PoE enables you to avoid installing AC power at a remote powered device.

มีสินค้าในสต็อก

This is a single port Power-over-Ethernet (POE) Injector. This device helps eliminate the need for a POE enabled equipment switch, and add POE items such as wireless LAN, Bluetooth Access Points, and many IP function devices. The injector is typically installed near the Ethernet hub and connected to a remote POE device through a single Ethernet Cat 5e, Cat6, or Cat6a cable. This AC/DC powered POE Injector is a power sourcing equipment (PSE), which combines data transferred over a fiber optic link with 54-57Vdc output power voltage. Generating a maximum POE output of 60W, this media converter Injector enables remote power for a new range of applications including pan-tilt-zoom (PTZ) cameras, video-phones and thinclients. It complies to both IEEE 802.3af and IEEE 802.3at PoE standard parameters, while doubling the available power. It can power both existing 10/100Base-T network devices and supports 10/100/1000Base-T applications, such as Wi-MAX and remote distance wireless IEEE 802.11n access points over CAT5e, Cat6, and Cat6a UTP cable (cable length up to 100 meters / 330 feet). Our media converters and network interface cards are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs. With our certification test program, we can guarantee your product will work right the first time.

มีสินค้าในสต็อก

มีสินค้าในสต็อก

มีสินค้าในสต็อก

มีสินค้าในสต็อก

The single port PoE midspan provides up to 60 Watts of power over Ethernet and offers a IEEE 802.3bt-compliant solution for remote powering of current as well as emerging high power applications. The PD-9501GC is designed specifically to power IEEE 802.11n and IEEE 802.3bt access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients and other high power Ethernet end terminals.

มีสินค้าในสต็อก

มีสินค้าในสต็อก

The LAN Power model LP-2590 Single Port ULTRA High Power PoE Midspan Injector sup- ports powering IP 'PoE Enabled' End Devices. The Single Port PoE Midspan Injector provides up to 90 Watts continuously at 56 VDC to all 4 pairs in a standard Category 5, 5e, 6, 6a Ethernet cable. The LP-2590 delivers both data and power over a single standard Ethernet cable to an IP 'PoE' enabled End Device designed to receive both Power and Data through it's RJ45 connection. The second RJ45 on the LP-2590 passes incoming data from the IP End Device to a Router or Ethernet Switch (up to 1000Mbs/Gigabit). The maximum cable distance between the Router or Ethernet Switch to the IP End Device is 100 meters/328 feet and the LP-2590 is between these two devices. PRDUCT FUNCTIONS AND FEATURES Output power is up to 90 Watts continuouslyComplaint to the IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt PoE StandardsPower and Data carried on the same single ethernet cableSupports Data of 10/100Mbs or 10/100/1000Mbs GIGABIT capableSurge Protection with Over Voltage and Current Protection (Protects the Ethernet Switch)LED indicators display power statusThe LP-2590 is a robust wall mount design and is supplied with a 3 Pin AC Mains Power CordFor use with ANY IEEE 802.3af, IEEE 802.3at and/or IEEE 802.3bt Compliant 'PoE' Enabled Device such as: IP Surveillance Cameras IP/VOIP Telephones Wireless LAN Access Points Emerging PoE Products Use with LAN Power Compliant Devices including: LP-2334/LP-2354 Four Port PoE Switch/Extender (Internal & External) LP-4912POE Dual Voltage Splitter Full 2 Year Product Warranty

มีสินค้าในสต็อก

This is a single port Power-over-Ethernet (POE) 10/100-1000Base-T Injector. This device helps eliminate the need for a POE enabled equipment switch, and add POE items such as wireless LAN, Bluetooth Access Points, and many IP function devices. The injector is typically installed near the Ethernet hub and connected to a remote POE device through a single Ethernet Cat 5e, Cat6, or Cat6a cable. The injector can support an advanced 802.3at or nonstandard (optional) compliant device which support the standard POE pin out. This AC/DC powered POE Injector is a power sourcing equipment (PSE), which combines data transferred over a fiber optic link with 48V power supply, providing power to IEEE802.3at powered device (PD) over CAT5e, Cat6, and Cat6a UTP cable (cable length up to 100 meters / 330 feet). It complies with the IEEE802.3at standard. Our media converters and network interface cards are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs. With our certification test program, we can guarantee your product will work right the first time.

มีสินค้าในสต็อก

The AXIS 30 W Outdoor Midspan is a versatile and reliable PoE injector that is designed to power and connect a wide range of AXIS devices. With its compatibility with various AXIS products, including door controllers, fixed cameras, dome cameras, PTZ cameras, and more, this midspan offers seamless integration and flexibility for your surveillance system. It is also compatible with AXIS housings, I/O relay modules, illuminators, intercoms, modular cameras, people counters, PoE extenders, power over Ethernet, security radars, speakers, thermal cameras, and video encoders, making it a comprehensive solution for your security needs. With its 30W maximum output power, this midspan ensures that your devices receive sufficient power for optimal performance. It also provides surge protection, safeguarding your equipment from power surges and ensuring their longevity. The wall/pole mountable design allows for easy installation and placement, making it suitable for various outdoor environments. Whether you are setting up a new surveillance system or expanding an existing one, the AXIS 30 W Outdoor Midspan is the perfect choice. Its compatibility with a wide range of AXIS devices, along with its reliable performance and surge protection, makes it a reliable and efficient solution for your security needs. Power your surveillance system with confidence using the AXIS 30 W Outdoor Midspan.

มีสินค้าในสต็อก

Passive PoE AdapterPowers TP-Link products that support 48V passive PoE POE4818GPower Your DevicesUse the passive PoE adapter POE4818G to simultaneously supply power and transmit data to a passive PoE device.Convenient Wall-Mounting DesignPOE4818G offers a convenient wall-mounting brackets to be easily installed on a wall.Compatible DevicesPOE4818G is recommended to offer power supply to TP-Link's passive PoE products which as follows.

มีสินค้าในสต็อก

This Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using a standard Ethernet cable. 30 Watt Power Budget Provides up to 30W of power (midspan) to IEEE 802.3af (PoE / Type 1) and IEEE 802.3at (PoE+ / Type 2) powered devices (PD) like: Cameras Sensors Wi-fi access points Uses Cat 5e (or higher rated) Ethernet cabling. Designed for Harsh Environments Industrial features include -40 C to 75 C operating temperature, IP-30 rated housing, vibration, shock, and free-fall standard testing. Vibration: EN 60068-2-6 Shock: EN 60068-2-27 Free-fall: EN 60068-2-32 600,000+ hours MTBF rating using Telcordia/Bellcore at 50C for long-term reliability. Dual Power Inputs Dual power inputs provide redundancy. Accepts terminal block power or coaxial power connectors with the barrel plug adapter, allowing the product to be hardwired or powered using an external power supply (not included), which does not require professional installation. The POEINJ30W is backed by a StarTech.com 2-year warranty and free lifetime technical support. More from the Manufacturer

มีสินค้าในสต็อก

What This Product DoesThe PoE Injector POE150S (TL-POE150S) fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK's POE10R, or other equivalent product, to expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc.

มีสินค้าในสต็อก

The Aruba PoE Injector (R6P67A) is the perfect solution for powering your Aruba Access Points with ease and efficiency. With compatibility for a wide range of Aruba Access Points, including the AP-303H, AP-303P, AP-304, and many more, this PoE injector ensures seamless integration into your network infrastructure. Featuring IEEE 802.3at standard PoE support, the Aruba PoE Injector delivers reliable power to your access points, eliminating the need for separate power cables and adapters. With 1 Ethernet input port and 1 PoE output port, installation is a breeze, allowing you to quickly and effortlessly connect your devices. With a maximum output power of 30W, this PoE injector provides ample power to keep your access points running smoothly. Whether you're deploying access points in a small office or a large enterprise environment, the Aruba PoE Injector has you covered. Designed with an internal form factor, this PoE injector seamlessly integrates into your existing network setup. Its compact size ensures a clean and organized installation, while its robust construction guarantees long-lasting performance. Upgrade your network infrastructure with the Aruba PoE Injector (R6P67A) and experience the convenience and efficiency of Power over Ethernet. Say goodbye to messy cables and power adapters, and say hello to a streamlined and reliable network solution. Take control of your network with Aruba.

มีสินค้าในสต็อก

The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK's TL-POE10R, or other equivalent product, to expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc. More from the Manufacturer

มีสินค้าในสต็อก