Tripp Lite Schakelbare PDUMH30ATNET 25-Stopcontacten PDU Rackmonteerbaar 2U
Tripp Lite Schakelbare PDUMH30ATNET 25-Stopcontacten PDU Rackmonteerbaar 2U
Tripp Lite PDUMH30ATNET
- Free Shipping
- 1 Jaar Garantie
- 30 dagen retourneren
- Klimaatneutraal
Product Belangrijkste Kenmerken
- Enkelfasige 30A 120V Auto Transfer Switch / ATS PDU; Zeer betrouwbare Solid State Switching
- Maakt redundante A/B-stroomoptie mogelijk voor niet-redundante netwerkapparaten
- Ingebouwde LX Platform Network Interface
- 2U rackmontage, 2 L5-30P ingangen, 25 geschakelde stopcontacten (24 5-15/20R, 1 L5-30R)
- Individueel schakelbare stopcontacten en ingebouwde netwerkinterface maken op afstand bediening en monitoring mogelijk
uren
minuten
Verzendinformatie
Tripp Lite
PDUMH30ATNET
Tripp Lite Switched ATS / Auto Transfer Switch biedt een redundante stroomoptie voor netwerkapparaten met één snoer. Dubbele invoersnoeren ondersteunen afzonderlijke verbindingen met PRIMAIRE en SECUNDAIRE stroombronnen. De ATS zal normaal gesproken continue uitvoer naar alle stopcontacten handhaven zoals afgeleid van de primaire invoerkabel. Als de primaire stroombron instabiel wordt of helemaal uitvalt, schakelt de ATS over naar de secundaire stroombron totdat de primaire invoer hersteld en stabiel is. Betrouwbare solid-state schakeling tussen primaire en secundaire invoeren vindt plaats in 1-5 milliseconden. Schakelbare PDU-functies omvatten individueel regelbare uitvoerstopcontacten en ingebouwde netwerkinterface. Super snelle omschakeling tussen primaire en secundaire stroombronnen vindt plaats binnen milliseconden. ATS-functionaliteit wordt ondersteund door twee compatibele AC-stroombronnen, ongeacht de fasehoek, om een verscheidenheid aan geavanceerde redundante stroomnetwerktoepassingen te ondersteunen. Maakt fault-tolerant, hot-swappable UPS-bescherming mogelijk wanneer gebruikt met een enkele UPS en volledig redundante UPS-bescherming wanneer elk snoer is aangesloten op een apart UPS-systeem. In een twee-UPS omgeving moet de primaire invoerkabel worden ondersteund door een UPS met sine-golf van volledige tijd zonder overschakeltijd. ATS-configuraties die gebruik maken van afzonderlijke hoofdcircuits, noodgeneratoren en zelfs afzonderlijke voedingsnet-feeds worden volledig ondersteund. De ingebouwde ATS-processor evalueert constant de stroomkwaliteit op beide ingangsbronnen om overschakeling naar de secundaire bron te voorkomen wanneer deze niet beschikbaar is of van lagere kwaliteit dan de primaire bron. Voorste invoer-LED's tonen de beschikbaarheid van primaire of secundaire stroom. Ingebouwde LX Platform netwerkbeheerinterfacekaart. De Java-vrije LX Platform op HTML5 gebaseerde netwerkinterface maakt volledige externe toegang mogelijk voor het controleren van de PDU-status en e-mailmeldingen via een beveiligde webbrowser, SNMP, telnet of SSH. Het ondersteunt 10/100 Mbps auto-sensing voor optimale communicatie met een Ethernet-netwerk. Optionele EnviroSense2-modules (apart verkrijgbaar) bieden verschillende mogelijkheden voor milieumonitoring. Ondersteunde protocollen zijn onder andere HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP en NTP.
.2.9kW Single-Phase ATS/Switched PDU Provides a Redundant Power Option
Tripp Lite’s PDUMH30ATNET ATS/Switched PDU provides all the management features of a switched PDU, plus a redundant 120V power option for single-corded network devices in data centers, network closets, server rooms, computer rooms and other environments requiring network-grade power. This PDU has 25 switched outlets (24 NEMA 5-15/20R and 1 L5-30R) and supports mounting in 2U of rack space, on a wall or under a counter.
Product Specifications
Primary and Secondary Inputs for Power Redundancy
To provide redundant power for network devices, this PDU has dual 10 ft. (3 m) input power cords with NEMA L5-30P plugs for connection to compatible AC power sources, including separate mains circuits, backup generators and separate utility power grid feeds. Dual inputs also enable fault tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full-time sine wave UPS with zero transfer time, such as a Tripp Lite SmartOnline UPS.
Switches to Secondary Power Source in Milliseconds
The easy-to-read two-character LCD load meter displays the total connected equipment load, as well as the loads carried by both banks, so you can assure proper load balancing. By monitoring the total load in real time, you allow equipment to be safely connected with no danger of overloading the PDUMH30NET or power supply circuits.
Control Individual Outlets from Anywhere 24/7
For a higher level of network power control, the 16 NEMA 5-15/20R outlets can be individually controlled in real time. These controllable outlets enable power management tasks, including load shedding, load ramping, programming power-on and power-off sequences, and rebooting of locked-up network devices, to be performed remotely. By reducing the frequency of on-site visits, these advanced remote capabilities can save you money and reduce downtime. Unused outlets can be disabled to prevent the connection of unauthorized equipment loads. Each outlet has an LED that illuminates to confirm power on/off status.
Offers Individual Outlet Control from Anywhere
The PDUMH30NET’s all-metal case is designed to endure in demanding work environments. The locking NEMA L5-30P plug and included cord retention brackets for the outlets help prevent the PDU and its connected equipment from becoming accidentally disconnected. Real-time clock backup maintains the time of day and date, even if the PDU is shut down and unpowered.
Versatile Installation Options
The PDUMH30NET mounts in 2U of space in EIA-standard 19-inch 2-post and 4-post racks using the included mounting brackets. You can install the PDU with outlets facing either the front or rear, whichever direction offers better airflow or equipment access. You can also use the mounting brackets to install the PDU on or under a counter.
Upgradable Firmware
To support any future product enhancements, the PDU’s firmware can be manually upgraded.
Why Choose Tripp Lite?
Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, protect, manage, house, cool, connect and mount your equipment. From the largest data center to the smallest home office, Tripp Lite products keep your equipment running effectively and efficiently. Whether you need to supply power to servers and have reliable battery backup, connect high-resolution video sources to displays and digital signs, or organize and secure IT equipment in rack enclosures, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With over 95 years of quality products and service, Tripp Lite is a brand you can trust.
Return Policy |
Time to Return |
Standard Return Policy |
We offer a hassle-free 30-day returns policy for domestic (US) orders, excluding non-refundable items. Refund or Replacement within 30 days of the delivery date. All products that fall under the Standard Return Policy qualify for our 30-Day Hassle-Free Returns. Please see the section above for more details. |
Replacement Only Return Policy |
Replacement within 30 days of the delivery date. |
Manufacturer Only Return Policy |
Covered by the manufacturer's warranty. Please refer to the terms and conditions for the manufacturer's warranty or contact the manufacturer. |
Holiday Extended Return Policies |
Extended Holiday Return Policy.Qualifying purchases of products displaying the " Extended Holiday Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Refund or Replacement until January 31, 2024. Extended Holiday Replacement-Only Return PolicyQualifying purchases of products displaying the " Extended Holiday Replacement-Only Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Replacement until January 31, 2024. |