Tripp Lite PDUMH20HVAT Misurata PDU 16/20A 200-240V 1U Montaggio a Rack Orizzontale Prese C13/C19
Tripp Lite PDUMH20HVAT Misurata PDU 16/20A 200-240V 1U Montaggio a Rack Orizzontale Prese C13/C19
Tripp Lite PDUMH20HVAT
- Free Shipping
- 1 Anno Garanzia
- Resi entro 30 giorni
- Carbon Neutral: Neutro in carbonio
Caratteristiche chiave del prodotto
- Interruttore di trasferimento automatico monofase 16/20A 200-240V / ATS PDU
- Consente l'opzione di alimentazione ridondante per i dispositivi di rete con un solo cavo
- Ingressi primario e secondario separati collegabili a due fonti di alimentazione compatibili
- Rackmount orizzontale da 1U; 2 ingressi C20; 8 prese C13 e 2 prese C19
- Contatore di corrente visuale a due cifre; Opzioni di aggiornamento disponibili
Tripp Lite PDUMH20HVAT Misurata PDU 16/20A 200-240V 1U Montaggio a Rack Orizzontale Prese C13/C19
Tripp Lite PDUMH20HVAT
- Free Shipping
- 1 Anno Garanzia
- Resi entro 30 giorni
- Carbon Neutral: Neutro in carbonio
Caratteristiche chiave del prodotto
- Interruttore di trasferimento automatico monofase 16/20A 200-240V / ATS PDU
- Consente l'opzione di alimentazione ridondante per i dispositivi di rete con un solo cavo
- Ingressi primario e secondario separati collegabili a due fonti di alimentazione compatibili
- Rackmount orizzontale da 1U; 2 ingressi C20; 8 prese C13 e 2 prese C19
- Contatore di corrente visuale a due cifre; Opzioni di aggiornamento disponibili
Tripp Lite
PDUMH20HVAT
Il commutatore automatico ad ATS / Auto Transfer Switch di Tripp Lite fornisce un'opzione di alimentazione ridondante per dispositivi di rete con un solo cavo. I cavi di ingresso duali supportano il collegamento separato alle sorgenti di alimentazione PRIMARIA e SECONDARIA. L'ATS mantiene normalmente l'erogazione continua a tutte le prese come derivata dal cavo di ingresso primario. Se la sorgente di alimentazione primaria diventa instabile o fallisce del tutto, l'ATS passerà alla sorgente di alimentazione secondaria fino a quando l'ingresso primario non sarà ripristinato e stabile. Il passaggio super veloce tra le sorgenti di alimentazione primaria e secondaria avviene nel giro di millisecondi. La funzionalità ATS è supportata da due sorgenti di alimentazione CA compatibili, indipendentemente dall'angolo di fase, per supportare una varietà di avanzate applicazioni di rete di alimentazione ridondante. Consente la protezione hot-swappable fault-tolerant UPS quando utilizzato con un singolo UPS e la protezione UPS completamente ridondante quando ciascun cavo è collegato a un sistema UPS separato. In un ambiente a due UPS, il cavo di ingresso primario deve essere supportato da un UPS a onda sinusoidale a tempo zero. La serie SmartOnline di Tripp Lite è altamente raccomandata per l'uso come UPS primario in un'applicazione a due UPS. Le configurazioni ATS che utilizzano circuiti principali separati, generatori di backup e persino alimentazioni della rete elettrica di servizio separate sono completamente supportate. Il processore ATS a bordo valuta costantemente la qualità dell'alimentazione su entrambi gli ingressi per impedire il passaggio alla fonte secondaria quando non disponibile o di qualità inferiore rispetto alla fonte primaria. I LED di ingresso frontale visualizzano la disponibilità di alimentazione primaria o secondaria.
.Efficient Single-Phase Monitored Power Distribution with Auto Transfer Switch (ATS)
Featuring a built-in network interface and an auto transfer switch, Tripp Lite's PDUMNH20HVAT 3.3/3.8kW Single-Phase Monitored ATS Power Distribution Unit (PDU) provides full remote power monitoring and a redundant power option for network devices with non-redundant power supply configurations. Dual inputs allow connection to separate primary and secondary power sources for solid-state automatic transfer switching when required to keep equipment running without interruption. Connect the L6-20R output to a single device, or connect to a vertical 20A 208/240V PDU (sold separately) to power additional outlets.
Dual PDU Inputs for Power RedundancyThe PDUMNH20HVAT has two 10 ft. input cords with L6-20P plugs to support connection to separate primary and secondary single-phase power sources, such as separate mains circuits, backup generators and even separate utility power grid feeds. The two power sources provide power redundancy for network devices with non-redundant power supply configurations. The dual power sources enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (primary UPS should produce a sine wave with zero transfer time). The PDUMNH20HVAT has a rugged all-metal housing and provides selectable 208/240V output. Maximum input current is 20A. |
|
Auto Transfer Switch (ATS) for Reliable, Continuous OutputDynamic solid-state (TRIAC) automatic transfer switching is supported by any two compatible AC power sources. The PDUMNH20HVAT supplies continuous output to its L6-20R output from the primary power source. If the primary source fails or becomes unstable, the ATS switches to the secondary power source until the primary source is restored. An on-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when it’s unavailable or of lower quality than the primary source. The transfer between power sources happens in 1 to 5 milliseconds, ensuring uninterrupted operation of connected equipment. |
|
Advanced Network Monitoring Capabilities
A built-in network interface enables full remote access for power monitoring, configuration and control via a secure network or web browser interface. Tiered access privileges allow both an administrator and a guest to log in and monitor the PDU via a web browser. This PDU supports notification of all major power events and user-specified alarm thresholds via email or SNMP traps. Real-time clock backup maintains the time of day and date even if the PDU is shut down and unpowered. When used with an optional ENVIROSENSE environmental sensor module, the PDUMNH20HVAT can also remotely monitor temperature/humidity conditions.
Broad Compatibility
The PDUMNH20HVAT provides 10/100 Mbps auto-sensing for optimal communication compatibility with a current 10/100 Base-T network. Protocols supported include HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, SNMPv3, Telnet, SSH, FTP, DHCP, BOOTP and NTP. DHCP/Manual configuration support provides the ability to have network settings automatically assigned to the card or manually assigned via permanent IP addresses.
Digital Meter and Source Status LEDs for Real-Time Monitoring
The digital meter allows IT personnel to monitor in real time (either locally or remotely) values such as amperage, kilowatts, voltage, frequency and power factor. It helps ensure that the PDU is used at maximum capacity without danger of overload. The meter can also show the IP address. LEDs indicate which source is preferred, which source is available for use and which source is currently being used.
Why Choose Tripp Lite?
Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, protect, manage, house, cool, connect and mount your equipment. From the largest data center to the smallest home office, Tripp Lite products keep your equipment running effectively and efficiently. Whether you need to supply power to servers and have reliable battery backup, connect high-resolution video sources to displays and digital signs, or organize and secure IT equipment in rack enclosures, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With over 95 years of quality products and service, Tripp Lite is a brand you can trust.
Return Policy |
Time to Return |
Standard Return Policy |
We offer a hassle-free 30-day returns policy for domestic (US) orders, excluding non-refundable items. Refund or Replacement within 30 days of the delivery date. All products that fall under the Standard Return Policy qualify for our 30-Day Hassle-Free Returns. Please see the section above for more details. |
Replacement Only Return Policy |
Replacement within 30 days of the delivery date. |
Manufacturer Only Return Policy |
Covered by the manufacturer's warranty. Please refer to the terms and conditions for the manufacturer's warranty or contact the manufacturer. |
Holiday Extended Return Policies |
Extended Holiday Return Policy.Qualifying purchases of products displaying the " Extended Holiday Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Refund or Replacement until January 31, 2024. Extended Holiday Replacement-Only Return PolicyQualifying purchases of products displaying the " Extended Holiday Replacement-Only Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Replacement until January 31, 2024. |