This Integrate mixed cabling environments using either switched or shared Ethernet. This full-featured media converter makes the migration from copper to fiber easier than ever before.

In stock

Transition Network's Industrial Converter Switch is hardened device designed to reliably operate in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments.The Converter switch can connect to either 10Base-T or 100Base-TX ports and can provide redundant 100Base-FX fiber optic connections for links up to 2km.

In stock

The ET90110SC2 10/100 Mbps Multimode Fiber Media Converter SC (2 km) lets you extend a Fast Ethernet network (10/100Mbps) over multimode fiber, at distances up to 2 km (1.2 miles). A cost-effective solution for connecting a 10/100 Mbps Ethernet (10/100Base-T) network to remote network segments over a 100Base-FX fiber backbone, the media converter is designed to offer a durable and convenient Ethernet-to-fiber solution, featuring an all-steel chassis, and a simple plug-and-play installation with minimal configuration required. For added versatility, this fiber media converter supports standalone operation, or installation into the 20 Slot, 2U Rackmount Chassis (ETCHS2U). Backed by a StarTech.com 2-year warranty and free lifetime technical support. More from the Manufacturer

In stock

Use Standard Media Converter Switches in clean, temperaturecontrolled areas of +32 to +104° F (0 to +40° C), such as offices and closets. Hardened Media Converter Switches suit -13 to +140° F (-25 to +60° C) operation in dusty or dirty environments. Their sealed cases are a heat sink, so no internal airflow is needed for cooling, and they resist contaminants such as dust, dirt, and moisture. For harsher environments of -40 to +167° F (-40 to +75° C), choose Extreme Media Converter Switches. These rugged units are for outdoor use (they only require protection from water) and feature a sealed case, which uses its own metal shell as a heat sink.

In stock

The S-110-XT Industrial Temperature Media Converters address the need for transparently connecting 10/100 Ethernet equipment that operate in extreme temperatures to fiber optic cable. The S-110-XT Media Converters will operate in industrial grade temperatures of -40F to +167F (-40C to +75C). Equipment found in traffic management, oil and gas pipelines, weather tracking, industrial and outdoor applications must function in temperatures that cannot be supported by a commercial based media converter. Boasting this extended temperature feature along with a rugged steel casing, the S-110-XT Media Converter provides an economical path to extend the distance between two industrial devices subjected to harsh environments and severe temperatures such as security cameras, wireless access points, alarms, traffic controllers, sensors and tracking devices.

In stock

This Just Convert-IT Bridging Media Converter is an inexpensive, no frills way to extend the distance between connections with different speeds or duplex using fiber optic cable while maintaining the same quality and reliability found on Transition's full-featured line of products.

In stock

The Transition Networks 10/100 Bridging Converter is the perfect solution for seamlessly connecting your Ethernet networks over fiber optic cables. With its advanced technology and reliable performance, this converter ensures fast and secure data transmission, allowing you to bridge the gap between different network types with ease. Whether you're a home user or a business professional, this converter offers the flexibility and convenience you need. Its compact and durable design makes installation a breeze, and with support for a maximum distance of 1.24 miles, you can extend your network connectivity without compromising on speed or reliability. Trust in Transition Networks, a leading brand in networking solutions, to deliver the highest quality products for your networking needs. Upgrade your network today with the Transition Networks 10/100 Bridging Converter and experience seamless connectivity like never before.

In stock

The IMC-450 and 470 series are standalone media converters with an optional internal power security device that makes the connection between copper and fiber cables. They can be installed anywhere a network connection is required. In addition, these media converters feature automatic link restoration. They increase the scalability of a network by providing rate conversion, distance extension, and multiple types of fixed fiber connectors or open slots for small form-factor pluggable (SFP) connections. The IMC-450 series provides one 10/100Mbps copper UTP port and one fiber port. The IMC-470 series provides two 10/100/1000Mbps copper UTP ports and one fiber port. They are available in an SFP form factor, as well as for fixed-fiber in single-mode and multi-mode. Link Fault Pass Through (LFPT) functionality allows network operators to determine a fault condition on the interface. LFPT can be enabled vis a dip switch on the front of the unit.

In stock

Media converters interface between two cable types. The most common use for media converters is to insert fiber for network extensions, up to 40 kilometers or more, beyond the 100-meter limit imposed by copper cable. Fiber media converters, also known as fiber transceivers or Ethernet media converters, are simple networking devices that make it possible to connect two dissimilar media types. Media converters are important in interconnecting fiber optic cabling-based systems with existing copper-based, structured cabling systems.

In stock

FC111A-20, FC111B-20, and FC111PB-20 are 100M media converters, each providing a 100M RJ-45 port and a 100M SC fiber port, which can convert between electrical and optical signals. Long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring and wireless networking. Take FC111A-20 as an example, FC111A-20 adopts WDM (Wavelength Division Multiplexing) technology, helping send and receive data at a distance of up to 20 km with only a single mode fiber, which saves half of the cable deployment cost for customers. FC111A-20 transmits data at 1550 nm wavelength and receives data at 1310 nm wavelength on optical fiber. Therefore, the terminal device used in conjunction with the FC111A-20 should send data at a wavelength of 1310 nm and receive data at a wavelength of 1550 nm. TP-Link media converter FC111B-20 is one of the products that can cooperate with FC111A-20. Besides, FC111A-20 / FC111B-20 can be used as standalone device (no rack required) or used with TP-Link's FC1420 rack for auto MDI/MDI-X in TX port in which duplex mode is automatically negotiated.

In stock

Supports 2048 MAC addresses and features a 384 KB buffer memory. The Auto MDI/MDI-X copper port autonegotiates for 10-/100-Mbps speed and autodetects full-or half-duplex mode. The Mini Industrial Media Converter can be installed easily on a DIN rail. Mounting kit included.

In stock

The Micro Mini Media Converter is ideal for bringing fiber to the desktop and for mobile applications where light weight, compact size, and low power requirements are critical.Weighing only 2.5 ounces and about the length of a house key, this ultra-compact media converter is portable yet powerful. For extra versatility, it can be USB-powered, making it easy to provide fiber connectivity to locations where AC or DC power is unavailable, for instance, field-deployed fiber-to-the-laptop. For easy portability, this tiny converter conveniently slips into a pocket or laptop carrying case.The converter is plug-and-play with an RJ-45 port that autonegotiates for speed, duplex mode, and crossover functions for PCs with 10BASE-T, 100BASE-TX, and 1000BASE-T Ethernet. On the fiber side, the converter has an ST connector for connection to single-mode fiber.Because it can be powered through a computer's USB 1.0 or 2.0 port, the Micro Mini Media Converter is ideal for connections to fiber in areas where a spare power outlet may not be available. When plugged into a computer's USB port, the media converter shuts down automatically when you turn off the computer, which saves energy.

In stock

DEVICE INTERFACE: 1 x MoCA Coax: F-Type Female coax input, 1 x TV Coax: F-Type Female coax output, 1 x RJ-45 Gigabit LAN port. Comes with 1 x TMO-311C MoCA Adapter ENHANCE YOUR WIFI NETWORK & COVERAGE: Through a reliable wired network, MoCA Coaxial Alliance 2.0 technology extends a high-speed Triple Play network delivering consistent video and voice bandwidth with lowered latency MORE RELIABLE STREAMING & GAMING: The increased speed and bandwidth of your network means more reliable streaming, gaming, clear HD and 4K video, among other critical working from home needs and applications. USE YOUR EXISTING COAX WIRING TO EXTEND YOUR ETHERNET NETWORK: Simply connect your existing coax wiring to the MoCA 2.0 Adapter to create a faster and more reliable wired Ethernet connection to your router, gaming console, or any device with and Ethernet port. No configuration required. COMPATABILITY: Backwards compatible with MoCA 1.1/1.0 standards. Not compatible with Directv, Dish Network, AT&T U-Verse, or other non-MoCA compliant subscription services PERFORMANCE MODES: Performance modes 400Mbps and 800Mbps (bonded) GIGABIT: These MoCA to Ethernet converters each feature a Gigabit LAN port with a net throughput of up to 1Gbps that allows MoCA traffic to flow smoothly, reducing traffic bottlenecks COMPACT DESIGN: With a compact and lightweight housing design, our MoCA adapters are well-suited for a variety of installations, such as your desktop or entertainment center. CONNECT MULTIPLE DEVICES: The MoCA Adapter supports up to 16 nodes on one network NDAA / TAA compliant (U.S. and Canada only) TRENDnet's MoCA 2.0 Ethernet Over Coax Adapter, model TMO-311C, uses your existing coaxial cables to extend a high-speed building-wide Triple Play network throughout your home or office. These compact MoCA adapters are designed to support MoCa 2.0 deployment for digital TV, high speed-internet, and VoIP single-access subscription service offerings. Compliant with Multimedia over Coax Alliance (MoCA 2.0) standards with improved packet error rate technology that delivers consistent voice and video bandwidth with lowered latency. NDAA / TAA compliant (U.S. and Canada only) MoCA 2.0Supports Multimedia over Coaxial Alliance 2.0 with improved packet error rate technology that delivers consistent voice and video bandwidth with lowered latency. Compact DesignWith a compact and lightweight housing design, our MoCA adapters are well-suited for a variety of installations, such as your desktop or entertainment center. Easy InstallationNo configuration needed, simply connect the adapters to the MoCA network to extend your network over existing coaxial cabling. More from the Manufacturer

In stock

Media converters interface between two cable types. The most common use for media converters is to insert fiber for network extensions, up to 40 kilometers or more, beyond the 100-meter limit imposed by copper cable. Fiber media converters, also known as fiber transceivers or Ethernet media converters, are simple networking devices that make it possible to connect two dissimilar media types. Media converters are important in interconnecting fiber optic cabling-based systems with existing copper-based, structured cabling systems.

In stock

Tripp Lite's N784-001-SC 10/100 Multimode Media Converter, is an economical way to extend the distance ( up to 2Km ) of network nodes by converting Cat5/6 UTP cables to Fiber Optic. The Media Converter features automatic MDI/MDI-X configuration, and the UTP port senses the network speed automatically as well. Dip switches allow half or full duplex operation on the fiber port. Power supplied by either AC-DC adapter, or USB connection ( switch selectable ).

In stock

Connect Legacy Networking EquipmentConnect an existing 10 Mbps device to 100 Mbps devices.Eliminate Collision DomainsSeparate Collision Domains while linking two half-duplex hubs with a collision free full duplex connection over fiber.The Mini Media Converters provide a cost-effective method for integrating fiber optic cabling into a 10/100 UTP environment. With its miniature size, the Mini offers a space saving alternative while it converts copper to fiber with the smallest footprint available in the industry.

In stock

TRENDnet's TI-F11SFP is a reliable IP30 rated 100/1000 Base-T to SFP media converter with hardened components rated for extreme industrial environments. Set 100 or 1000 Mbps throughput speeds, Auto Negotiation, and Link Fault Pass Through (LFP) using the front panel dip switches. Dual redundant power inputs (power supply sold separately: TI-M6024) with overload current protection support zero downtime applications. NDAA / TAA compliant (U.S. and Canada only)Package Contents:-TI-F11SFP-Quick Installation Guide-Removable terminal block-DIN-rail / wall mount kit More from the Manufacturer

In stock

Supports ThinNet cable to 185 meters (606.9 ft.) and up to 30 stations. UTP crossover switch plus automatic polarity detection. Switch-selectable ThinNet line termination. LEDs display status. Hardware available for mounting the converter to a wall or a DIN rail. Can also be used in the FlexPoint 14-Slot Power Chassis or the FlexPoint 5-Position Rackmount Kit. FlexPoint™ Modular Media Converters from Black Box are versatile and cost-effective standalone media converters that you can upgrade to a chassis-based system. They provide the ultimate in flexibility and reliability for your expanding multimedia LAN. FlexPoint offers a very wide range of converter options, including media converters for legacy systems such as ThinNet and Token Ring. Your choices include: Ethernet Fast Ethernet Gigabit Ethernet Token Ring UTP Single-mode fiber Multimode fiber ThinNet Single-mode to multimode fiber converters Long-distance fiber converters ATM OC-3 ATM OC-12 10/100 rate converters TI/EI Line Drivers The incredible variety and versatility of this system make it ideal for networks that are subject to constant upgrades and changes. Tailor the system to your requirements. Get the media converters you need now and use them individually. Then, when your LAN grows, mount your media converters on the wall, in the 5-Position Rackmounting Kit, or as modules in the Power Chassis. The Power Chassis holds 14 media converters and a Single or Dual AC or DC Power Supply. Also, be sure to see the rest of the FlexPoint family: FlexPoint 10BASE-T to 10BASE-FL Media Converters (LMC212A-MM-R3, etc.) FlexPoint 100BASE-TX to 100BASE-FX Media Converters (LMC213A-MMST-R2, etc.) FlexPoint Token Ring UTP to Fiber Media Converters (LTM215A) FlexPoint 10/100 Rate Converters (LMC100A-R2, etc.) FlexPoint Gigabit UTP to Fiber Media Converters (LMC1003A-R3, etc.) FlexPoint 100-Mbps Fiber to Fiber Converters (LMC252A-ST, etc.) FlexPoint 1000-Mbps Fiber to Fiber Mode Converters (LMC1001A, etc.) FlexPoint Fiber-to-Fiber Mode Converters for ATM OC-3 and OC-12 (LMC156A-ST, etc.) FlexPoint T1/E1 Copper to Fiber Line Drivers (MT660A-MM, etc.) FlexPoint RS-232 to Fiber Converters (ME660A-MST, etc.) Questions? Contact our FREE Tech Support.

In stock

Transition Network's "Just Convert-IT" serial RS232 to Fiber Media Converter is an inexpensive, no frills way to extend the distance between serial connections with the use of fiber optic cable. This converter supports full or half-duplex data transmission at speeds up to 120Kb/s. Unit and Port LEDs allow for quick status information on the converter.

In stock

The M/E-ISW Series is a hardened Fast Ethernet Mini media converter that provides a cost effective, plug-and-play media conversion between 10/100Base-TX ports and 100Base-FX ports for hardened or outdoor 10/100 environments. With its supported operating temperature range of -40°C to 75°C, the Mini offers a space saving alternative for converting copper to fiber in extreme environments.

In stock

The Micro Mini Media Converter is ideal for bringing fiber to the desktop and for mobile applications where light weight, compact size, and low power requirements are critical. Weighing only 2.5 ounces and about the length of a house key, this ultra-compact media converter is portable yet powerful. For extra versatility, it can be USB-powered, making it easy to provide fiber connectivity to locations where AC or DC power is unavailable, for instance, field-deployed fiber-to-the-laptop. For easy portability, this tiny converter conveniently slips into a pocket or laptop carrying case. The converter is plug-and-play with an RJ-45 port that autonegotiates for speed, duplex mode, and crossover functions for PCs with 10BASE-T, 100BASE-TX, and 1000BASE-T Ethernet. On the fiber side, the converter has an SC connector for connection to multimode fiber. Because it can be powered through a computer's USB 1.0 or 2.0 port, the Micro Mini Media Converter is ideal for connections to fiber in areas where a spare power outlet may not be available. When plugged into a computer's USB port, the media converter shuts down automatically when you turn off the computer, which saves energy.

In stock

Unidirectional communication is often used to safeguard information in secure environments such as government agencies and military networks. A Unidirectional device, sometimes referred to as a unidirectional security gateway or a data diode, provides a connection between two or more networks with different security classifications and helps to protect assets by ensuring information is directed only to, or from, the appropriate network as designated by the directional device. Unidirectional media converters combine this one-way communications with the benefits of a copper to fiber media converter. Media converters are a cost-effective, plug-and-play device that allows fiber optic cabling to be connected to copper-based networking equipment. The deployment of fiber adds a layer of security to networks as it is difficult to tap into fiber and go undetected. If threats are attacking a network, the fiber links go down and network administrators are made aware of the problem, providing them the opportunity to address a potential breach of security.Adding unidirectional technology to a media converter creates a physically secure one-way communication channel over fiber between a secure network and an unsecure network. These devices can be used to allow data from a classified, high-security area to be transmitted to a low-security area, while preventing unsecure data from re-entering the classified network. An alternate application allows a secure network to be updated with data from an external source while ensuring its critical data is unable to leave the classified area.

In stock

An industrial media converter that converts fiber to copper at a network endpoint. A Flexible Solution Covering Different Requirements This media converter features an open SFP slot for any standard gigabit SFP to be used for the incoming fiber connection and is easily deployed across applications or fiber cable types. Accepts terminal block power or coaxial power connectors with the barrel plug adapter, allowing the product to be hardwired or powered using an external power supply (not included), which does not require professional installation. It can be powered using 12V-56V DC for solar, automotive, rail, and other applications and requires a minimum 12V power input. Includes hardware for DIN rail or wall mounting. For Mission-Critical Applications Designed with IP-30 housing and has an MBTF of >500,000 hrs (Telcordia/Bellcore) at 50°C and an operating temperature range of include -40 C to 75 C for durability; it's rated to various vibration, shock, and free-fall standards: Vibration: EN 60068-2-6 Shock: EN 60068-2-27 Free-Fall: EN 60068-2-32 The IMC1GSFP is backed by a StarTech.com 2-year warranty and free lifetime technical support. More from the Manufacturer

In stock

The Transition Networks Mini M/E-PSW-FX-02(SC) Media Converter is a versatile and reliable solution for your network connectivity needs. With its compact design and easy installation, this media converter allows you to seamlessly connect your 10/100Base-TX and 100Base-FX networks. It supports a maximum distance of 1.24 Mile, ensuring reliable data transmission over long distances. Featuring a single SC port and a total of two ports, this media converter offers flexibility and scalability for your network infrastructure. Its external and wall mountable form factor allows for convenient placement and installation in any environment. Transition Networks is a trusted brand known for its high-quality networking products. The Mini M/E-PSW-FX-02(SC) Media Converter is no exception, delivering exceptional performance and reliability. It is also environmentally friendly, with certifications such as WEEE and RoHS. Upgrade your network with the Transition Networks Mini M/E-PSW-FX-02(SC) Media Converter and experience seamless connectivity and enhanced network performance. Whether you're a small business or a large enterprise, this media converter is the perfect solution for expanding your network capabilities. Take your network to the next level with Transition Networks.

In stock

Extend Your Network with Fiber The Gigabit Industrial Media Converter provides a cost-effective way to add fiber to your existing network infrastructure. It converts 10/100/1000Base-T(X) to 1000Base-X with ease. Designed for the Toughest Environments This media converter provides consistent network performance in the harshest work environments on earth. It features an operating temperature range of -40° to 158° F and rigid IP-30 housing.

In stock

Features | Extends a Network Connection up to 2 km over ST Multimode Fiber Optic Cable This network media converter converts a copper Ethernet signal to a multimode fiber optic signal and extends it to a second network device up to two kilometers (1.2 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-STMM with multimode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. Monitor Your Installation with Link Fault Signaling and Loop Back FunctionsDetermine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off. LEDs Indicate Installation Performance and Diagnostic FunctionsEasy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. Protective Metal Housing Built to Withstand a Variety of HazardsThe hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting. Works in Tandem with Tripp Lite's N785-CH12 ChassisHouse and power up to 12 Tripp Lite media converters, including the N784-H01-STMM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation. TAA-Compliant for GSA Schedule PurchasesThe N784-H01-STMM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

In stock

ADD-GMC-LX-4SC is a Media Converter that converts a 1000Base-TX(RJ45) to 1000Base-LX(SC) via a 1310nm single-mode fiber (SMF) SC connector, which allows distance reach up to 40km. ADD-GMC-LX-4SC provides a cost effective conversion from 1000Base Copper to 1000Base-LX fiber, while extending the network reach beyond the 100m reach limitation of copper. Addoncomputer.com Media Converters and Network Interface Cards are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs. With our ADDON CERTIFICATION TEST Program, we can guarantee your product will work right the first time.

In stock

SPOEB10xx-105 is a 10/100 Ethernet copper to fiber PoE media converter that enables enterprises to provide power to network devices over the existing CAT5 data connection. Transition Networks' AC powered PoE media converters combine data received over a fiber optic link with-48 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input. This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities.In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. (Also known as Powered Device Reset.)The PoE converter is fully compatible with devices that comply with the IEEE802.3af standard. The PoE converter is capable of inserting power on data pairs or spare pair of the MDI.

In stock

Fiber Integration Used in pairs or as a single unit, this mini media converter will ease the integration of fiber optic cabling into copper-rich Gigabit Ethernet environmentsExtend Network Distance Convert 1000Base-T ports over to 1000Base-SX/LX on a port-by-port basis. Fiber supports the transmission of Gigabit Ethernet data over much longer distances than is possible twisted pairLow-Latency Design As a layer-1 design, this Mini converter will retransmit Gigabit Ethernet signals without any store-and-forward packet inspection delays found in other layer-2 devices

In stock

ADAM-6000 accomplishes the integration of automation and enterprise systems easily through internet technology, so that users can avoid changing the entire architecture of the control system and even remotely monitor the device status more flexibly. ADAM-6000 modules are empowered by peer-to-peer (P2P) and Graphic Condition Logic (GCL), and can perform as standalone products for measurement, control and automation. Instead of having additional controllers or programming, system configurations can be done in an extremely short time with the easy-to-use and intuitive graphic utility.

In stock

ADD-MGMC-SFP is a One to One Managed Media Converter that converts a 1000Base Copper to 1000Base-X via an Open SFP Port. The Open SFP Port allows users to customize between the SX, LX, or BX connections. The ADD-MGMC-SFP provides a cost effective conversion from 1000Base Copper to 1000Base-X, while extending the network reach beyond the 100m reach limitation of copper. AddOn's One to One type manageable media converters are independent standalone systems that do not require a centralized, or unified platform management system. One to One manageable media converters can supervise the real time situation of remote manageable fiber media converters, and allow end users to set the functions remotely. With this system, the response speed of the operator is quickened, the daily maintenance and network expenditure is reduced, and the service quality is enhanced. Addoncomputer.com Media Converters and Network Interface Cards are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs. With our ADDON CERTIFICATION TEST Program, we can guarantee your product will work right the first time.

In stock

Extend Your Network with Fiber This media converter provides a cost-effective way to add fiber to your existing network infrastructure. It converts 10/100/1000Base-T(X) to 1000Base-X with ease. Designed for the Toughest Environments The Gigabit Industrial Media Converter provides consistent network performance in the harshest work environments on earth. It features an operating temperature range of -40° to 158° F and rigid IP-30 housing.

In stock

Extends Power and Data to a PoE+ Device up to 550 Meters via LC Multimode Fiber Cable This economical unit converts a multimode fiber optical signal to a copper Ethernet signal that extends both power (48 VDC) and 10/100/1000 Mbps Gigabit Ethernet to a PoE+ (Power over Ethernet) device. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-LC-MM1 with multimode fiber cable to reach greater distances. This could include providing both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices. Supports Power over Ethernet to Save You Money and Give You More Installation Choices PoE saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings. Supports Auto-Sensing of Network Speed and Other Advanced Functions Monitoring and controlling your network nodes is easy with the N785-P01-LC-MM1's advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDIZ configuration. Six LEDs indicate the converter's power, PoE, Ethernet network and fiber link statuses at a glance. Link fault pass through (LFP) monitors both the LC and RJ45 ports to ensure link status remains active. Works in Tandem with Tripp Lite's N785-001-LC-MM Media Converter This media converter connects to the N785-001-LC-MM using multimode fiber optic cabling with LC ends (such as Tripp Lite's N520-Series, sold separately) to extend an Ethernet network connection up to 550 meters. Use Cat5e/6 cabling (such as Tripp Lite's N001- or N201-Series cables) to deliver data and power to a 10/100/1000 Mbps PoE device up to 100 meters (328 feet) from the N785-P01-LC-MM1. Completely Plug-and-Play with No Additional Software Required for Connection The compact metal converter is easy to install and set up with no software or drivers required. The included power supply connects to a convenient AC outlet with no computer or other signal source needed.

In stock

ADD-GMCP-SX-5SC is a Media Converter that converts a 1000Base-TX(RJ45) to 1000Base-SX(SC) via a 850nm multi-mode fiber (MMF) SC connector, which allows distance reach up to 550m. ADD-GMCP-SX-5SC provides a cost effective conversion from 1000Base Copper to 1000Base-SX fiber, while extending the network reach beyond the 100m reach limitation of copper. This AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE), which combines data transferred over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3af powered device (PD) over CAT5 and up UTP cable (cable length up to 100meters / 330feets). It complies with the IEEE802.3af standard. The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection and LFP function. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Addoncomputer.com Media Converters and Network Interface Cards are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs. With our ADDON CERTIFICATION TEST Program, we can guarantee your product will work right the first time.

In stock

ADD-MGMC-LX-2SC is a One to One Managed Media Converter that converts a 1000Base-TX(RJ45) to 1000Base-LX(SC) via a 1310nm single-mode fiber (SMF) SC connector, which allows distance reach up to 20km. ADD-MGMC-LX-2SC provides a cost effective conversion from 1000Base Copper to 1000Base-LX fiber, while extending the network reach beyond the 100m reach limitation of copper. AddOn's One to One type manageable media converters are independent standalone systems that do not require a centralized, or unified platform management system. One to One manageable media converters can supervise the real time situation of remote manageable fiber media converters, and allow end users to set the functions remotely. With this system, the response speed of the operator is quickened, the daily maintenance and network expenditure is reduced, and the service quality is enhanced. Addoncomputer.com Media Converters and Network Interface Cards are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs. With our ADDON CERTIFICATION TEST Program, we can guarantee your product will work right the first time.

In stock

Features | Customize a Network Extension over Fiber Optic CableThis network media converter works with a variety of SFP transceivers to convert a copper Gigabit Ethernet signal to fiber optic and extend it to a second network device. The customizable SFP port supports both singlemode and multimode transceivers, allowing your network connection to reach hubs, switches and other devices located farther away than copper cabling's 100-meter limit. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. Monitor Your Installation with Link Fault Signaling and Loop Back FunctionsDetermine the health of your network connection via the Link Fault Signaling (LFS) and Line Loop Back (LLB) functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The LLB diagnostic test ensures copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off. LEDs Indicate Installation Performance and Diagnostic FunctionsEasy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. The included 20-57VDC terminal block provides primary and secondary power inputs. Protective Metal Housing Built to Withstand a Variety of HazardsThe IP30 industrial-grade aluminum case is protected from entry by tools, wires and other solid objects greater than 2.5 millimeters in diameter. It can also operate in extreme temperatures ranging from -40 to 75 degrees Celsius (-40 to 167 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for DIN mounting. TAA-Compliant for GSA Schedule PurchasesThe N785-I01-SFP-D is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

In stock

Features | Customize a Network Connection Extension over Fiber Optic CableThis network media converter works with a variety of SFP transceivers to convert a copper Gigabit Ethernet signal to fiber optic and extend it to a second network device. The customizable SFP port supports both singlemode and multimode transceivers, allowing your network connection to reach hubs, switches and other devices located farther away than copper cabling's 100-meter limit. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. Monitor Your Installation with Line Loop BackDetermine the health of your network connection via the Line Loop Back (LLB) function, which ensures copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off. LEDs Indicate Installation Performance and Diagnostic FunctionsEasy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. The included 20-57VDC terminal block provides primary and secondary power inputs. Protective Metal Housing Built to Withstand a Variety of HazardsThe hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for DIN mounting. TAA-Compliant for GSA Schedule PurchasesThe N785-H01-SFP-D is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

In stock

Fiber Integration Used in pairs or as a single unit, this mini media converter will ease the integration of fiber optic cabling into copper-rich Gigabit Ethernet environmentsExtend Network Distance Convert 1000Base-T ports over to 1000Base-SX/LX on a port-by-port basis. Fiber supports the transmission of Gigabit Ethernet data over much longer distances than is possible twisted pairLow-Latency Design As a layer-1 design, this Mini converter will retransmit Gigabit Ethernet signals without any store-and-forward packet inspection delays found in other layer-2 devices

In stock

This is a media converter that converts a 10/100Base-TX(RJ-45) to 100Base-X via an Open SFP Port. The Open SFP Port allows users to customize between the SX, LX, or BX connections. This media converter provides a cost effective conversion from 10/100Base-TX(RJ-45) to 100Base-X, while extending the network reach beyond the 100m reach limitation of copper. Our media converters are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs.

In stock

Features The Axiom Mini 10/100Base-TX to 100Base-FX Media Converter Series is a Fast Ethernet stand-alone Mini media converter that provides cost effective, entry-level media conversion between Copper RJ45 10/100Base-TX ports and 100Base-FX fiber optic ports. Available with an open SFP port or its fixed connector configuration, deployments can be just plug-and-play or are fully customizable with the transceiver of your choice. With its small size, it is ideal for locations where space is limited. Choose from Multimode or Single-mode fiber connections to meet the distance requirements of your network. Unit and Port LEDs allow for quick status information Auto-Negotiation Full-Duplex or Half-Duplex Operation Modes Auto-MDI/MDIX Automatic Link Restoration Connect to legacy network equipment Eliminate Collision Domains 10/100Base-TX UTP to 100Base-FX fiber media convertion Support IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/FX standards Available with Open SFP Port or optional built in LC/SC/ST Connections DIP switch to set different configurations LFP (Link Fault Pass-through) support Compact package size

In stock

This is a media converter card that converts a 10/100Base-TX(RJ-45) to 100Base-LX(SC) via a 1310nm single-mode fiber (SMF) SC connector, which allows distance reach up to 20km. It provides a cost effective conversion from 10/100Base-TX(RJ-45) to 100Base-LX fiber, while extending the network reach beyond the 100m reach limitation of copper. This device can be managed if used in our managed rack system or unmanaged with our unmanaged rack system or standalone chassis enclosure. Our media converters are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs.

In stock

SPOEB10xx-105 is a 10/100 Ethernet copper to fiber PoE media converter that enables enterprises to provide power to network devices over the existing CAT5 data connection. Transition Networks' AC powered PoE media converters combine data received over a fiber optic link with -48 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input. This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities. In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. (Also known as Powered Device Reset.) The PoE converter is fully compatible with devices that comply with the IEEE 802.3af standard. The PoE converter is capable of inserting power on data pairs or spare pair of the MDI.

In stock