APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.

In stock

0-5V power failure sensor to monitor the presence of utility power. Includes a 100ft / 30m cable and US NEMA power supply. More from the Manufacturer

In stock

The DSC End of line Power Supervisory Relay RM-1C ULC is a reliable and efficient solution for power supervision in your security system. Designed by Johnson Controls, a trusted name in the industry, this relay ensures the smooth operation of your security setup. With its compact design and easy installation, it seamlessly integrates into your existing system. This power supervisory relay is specifically designed to provide end-of-line supervision, ensuring that your security system is always functioning optimally. It effectively monitors the power supply and alerts you in case of any issues, allowing for quick and efficient troubleshooting. With the DSC End of line Power Supervisory Relay RM-1C ULC, you can have peace of mind knowing that your security system is always protected. Its advanced technology and reliable performance make it an ideal choice for both residential and commercial applications. Whether you're a homeowner looking to enhance the security of your property or a business owner in need of a robust security solution, this relay is the perfect fit. Its compatibility with various security systems and its ability to seamlessly integrate with other components make it a versatile choice for any setup. Invest in the DSC End of line Power Supervisory Relay RM-1C ULC and experience the benefits of a reliable and efficient power supervision solution. Trust in the expertise of Johnson Controls and enjoy the peace of mind that comes with a secure and well-monitored security system. Upgrade your security system today with the DSC End of line Power Supervisory Relay RM-1C ULC. Take control of your security and ensure the safety of your property and loved ones. Don't compromise on quality and reliability when it comes to your security needs. Choose DSC and experience the difference.

In stock

The PDUMNV30LX 2.9kW Single-Phase Monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via built-in network connection. Recommended for IT and industrial applications, the vertical PDU features 24 NEMA 5-15/20R outlets with included cord retention brackets to prevent cables from becoming accidentally disconnected. A 10-foot cord with NEMA L5-30P plug connects the PDU to a compatible AC power source, generator or protected UPS.The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.A digital ammeter allows you to monitor power consumption for both breakered load banks, as well as the total load to ensure they remain well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.Features Distributes and Monitors Network-Grade AC Power 2.9kW 120V 20A monitored PDU with single-phase input NEMA L5-30P with 10 ft. cord connects to compatible AC power source Firmware upgrades support future product enhancements 24 NEMA 5-15/20R Outlets Distribute Power Cord retention brackets prevent cables from becoming accidentally disconnected Digital Ammeter Reports power consumption for both breakered load banks, plus total output current Supports IP-address self-ID Rotates 180° for easy reading at either angle Built-In LX Platform Interface Allows full remote access for power monitoring with email notifications via secure web browser, SNMP, telnet or SSH Supports 10/100 Mbps auto-sensing for communication with an Ethernet network Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities No Java required Broad Communications Compatibility Supports IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP Supports automatic and manual assignment of IP address Easy 0U Installation in EIA-Standard 19 in. Racks Mounts vertically using included toolless buttons or rack-mounting brackets Included PDUMVROTATEBRKT allows mounting with rear-facing outlets TAA-Compliant Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

In stock

The PDUMNV15LX 1.4kW Single-Phase Monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via built-in network interface. Recommended for any IT or industrial application, it features 16 NEMA 5-15R outlets with included cord retention brackets to prevent cables from becoming accidentally disconnected. A 10-foot cord with NEMA 5-15P plug connects the PDU to a compatible AC power source, generator or protected UPS.The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. A digital ammeter allows you to monitor the PDU's current level in real time to ensure it remains well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.

In stock