V7 Replacement Batteries are designed for superior performance with select V7 UPS systems, replenishing power back-up capacity for home offices, small businesses and IT departments. Designed, manufactured and tested to meet our exacting specifications, V7 UPS batteries offer reliable power, guaranteed compatibility, and come fully assembled making hot-swap installation simple and convenient. Compliant with international regulations and safe for transport, V7 UPS batteries are sealed, spill-free and fully recyclable.

In stock

The CyberPower BP144VL2U01 rack/tower convertible Extended Battery Module (EBM) extends battery runtimes during power outages and is designed for CyberPower UPS systems OL5KRTHD and OL6KRTHD. The BP144VL2U01 takes 2U of rack space and can be installed in a rack or tower configuration to match the UPS form factor. Battery equalization technology improves battery life, and toolless front panel removal makes battery replacement easier. This unit comes with a three-year warranty. More from the Manufacturer

In stock

APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. PDU level power metering via remote access and local display for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparreled deployment flexibility. Maximum outlet density with 42 outlets in a 2.2" wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected. For data center deployments across multiple regions, these PDUs are both UL and CE rated providing one PDU that can be used globally to simplify and standardize deployment.

In stock

Like Being Everywhere, All the Time The RPM EV6 and LCD series of products are IP-addressable RPMs that allow administrators and technicians to remotely control the power to connected servers, network equipment, and security devices, eliminating the need for expensive and time-consuming service calls to reboot unresponsive locked-up devices. Each RPM EV6 and LCD PDU also has the capability to perform scheduled shutdowns and startups, offering additional cost savings via reduced energy consumption. When a device experiences a lock-up, the RPM-EV6 and LCD series can automatically notify administrators and users via email or SNMP traps, while also allowing user-configurable actions. Under Control from Anywhere Minuteman RPMs offer a secure connection that is accessible from any device with a standard internet browser, including desktop and laptop PCs, smartphones, and tablets. From these devices, users can control and configure all aspects of the device, including: Network Connection: The RPM is a smart IP-based PDU that connects to your network via CAT5 cable Control Individual Outlets: Power on/off, reboot, and monitor up to 24 individual devices from a single IP address Scheduled Management Actions: save power with automatic shutdown and startup of devices over weekends or holidays Notifications via SNMP or Email: To keep you informed of events such as a server shutdown, the RPM can submit its notifications via email to up to three addresses RPM Benefits Utilizing Minuteman's remote power manager products allows technicians and administrators to: Save Time: Reboot remote devices in seconds, not minutes or hours Increase Productivity: Eliminate help desk calls & lost time when a device locks up: RPM notifies & provides automatic reboot capabilities Cut Costs: Eliminate service calls to remote locations by managing devices from your computer or smartphone

In stock

Like Being Everywhere, All the Time The RPM EV6 and LCD series of products are IP-addressable RPMs that allow administrators and technicians to remotely control the power to connected servers, network equipment, and security devices, eliminating the need for expensive and time-consuming service calls to reboot unresponsive locked-up devices. Each RPM EV6 and LCD PDU also has the capability to perform scheduled shutdowns and startups, offering additional cost savings via reduced energy consumption. When a device experiences a lock-up, the RPM-EV6 and LCD series can automatically notify administrators and users via email or SNMP traps, while also allowing user-configurable actions. Under Control from Anywhere Minuteman RPMs offer a secure connection that is accessible from any device with a standard internet browser, including desktop and laptop PCs, smartphones, and tablets. From these devices, users can control and configure all aspects of the device, including: Network Connection: The RPM is a smart IP-based PDU that connects to your network via CAT5 cable Control Individual Outlets: Power on/off, reboot, and monitor up to 24 individual devices from a single IP address Scheduled Management Actions: save power with automatic shutdown and startup of devices over weekends or holidays Notifications via SNMP or Email: To keep you informed of events such as a server shutdown, the RPM can submit its notifications via email to up to three addresses RPM Benefits Utilizing Minuteman's remote power manager products allows technicians and administrators to: Save Time: Reboot remote devices in seconds, not minutes or hours Increase Productivity: Eliminate help desk calls & lost time when a device locks up: RPM notifies & provides automatic reboot capabilities Cut Costs: Eliminate service calls to remote locations by managing devices from your computer or smartphone

In stock

Like Being Everywhere, All the Time The RPM EV6 and LCD series of products are IP-addressable RPMs that allow administrators and technicians to remotely control the power to connected servers, network equipment, and security devices, eliminating the need for expensive and time-consuming service calls to reboot unresponsive locked-up devices. Each RPM EV6 and LCD PDU also has the capability to perform scheduled shutdowns and startups, offering additional cost savings via reduced energy consumption. When a device experiences a lock-up, the RPM-EV6 and LCD series can automatically notify administrators and users via email or SNMP traps, while also allowing user-configurable actions. Under Control from Anywhere Minuteman RPMs offer a secure connection that is accessible from any device with a standard internet browser, including desktop and laptop PCs, smartphones, and tablets. From these devices, users can control and configure all aspects of the device, including: Network Connection: The RPM is a smart IP-based PDU that connects to your network via CAT5 cable Control Individual Outlets: Power on/off, reboot, and monitor up to 24 individual devices from a single IP address Scheduled Management Actions: save power with automatic shutdown and startup of devices over weekends or holidays Notifications via SNMP or Email: To keep you informed of events such as a server shutdown, the RPM can submit its notifications via email to up to three addresses RPM Benefits Utilizing Minuteman's remote power manager products allows technicians and administrators to: Save Time: Reboot remote devices in seconds, not minutes or hours Increase Productivity: Eliminate help desk calls & lost time when a device locks up: RPM notifies & provides automatic reboot capabilities Cut Costs: Eliminate service calls to remote locations by managing devices from your computer or smartphone

In stock

Designed for datacenters and other electrically demanding applications, the CyberPower MBP63A2 Maintenance Bypass Power Distribution Unit (MBP PDU), allows the seamless transfer of an electrical load from UPS power to utility power for uninterrupted operation of connected equipment when performing maintenance, replacing batteries, or installing a new UPS. The MBP63A2 provides 208V nominal output to (1) NEMA L6-20R, (1) NEMA L6-30R and (1) Hardwire Terminal Block receptacle. Depending on UPS model, either a 3.3-foot AC cord or hardwire terminal block connects to the output power of the UPS. The UPS draws input power from the MBP63A2 separate from the outlets or terminal block for connected devices. When the switch on the front of the MBP63A2 is turned from Normal to Bypass, or from Bypass to Normal, the power that the MBP supplies to connected devices moves from one input power source to another. The LED display indicates which power source is active. Rugged, industrial-grade metal housing protects the MBP63A2. With a 2U form factor, this PDU can be mounted horizontally or vertically in a standard server rack, on a wall or in a tower configuration. The MBP63A2 is UL and RoHS compliant. A three-year limited warranty covers the PDU.

In stock

The CyberPower MBP30A5, a 5-outlet (rear), 1U Maintenance Bypass Power Distribution Unit (MBP PDU), provides 100-120 VAC 30A output (derated to 24A) to 5 NEMA 5-20R receptacles. Designed for datacenters and other electrically demanding applications, the MBP30A5 allows the seamless transfer of an electrical load from UPS power to utility power for uninterrupted operation of connected equipment when performing maintenance, replacing batteries, or installing a new UPS. A 6-foot AC cord connects to utility power; a 3.3-foot AC cord connects to the output power of the UPS. The UPS draws input power from the MBP30A5 through a dedicated NEMA L5-30R separate from the outlets for connected devices. When the switch on the front of the MBP30A5 is turned from Normal to Bypass, or from Bypass to Normal, the power that the MBP supplies to connected devices moves from one input power source to another. The LED display indicates which power source is active. Rugged, industrial-grade metal housing protects the MBP30A5. With a 1U form factor, this PDU can be mounted in a standard server rack. Its mounting hardware also enables it to be connected to a UPS for tower configurations. The MBP30A5 is UL and RoHS compliant. A three-year limited warranty covers the PDU for three years and connected equipment for as long as you own the product. Power Distribution Delivers AC power to servers, equipment, and connected devices via a power distribution unit.Maintenance Bypass Qualified personnel can use the bypass feature to disconnect the PDU from the UPS without disrupting power to connected equipment. This feature allows connected equipment to operate seamlessly during maintenance periods, battery replacement, or UPS installation.Manual Bypass Switch When the Manual Bypass Switch is turned to Normal, connected equipment is supplied by UPS output. When the Manual Bypass Switch is turned to Bypass, connected equipment is supplied by utility power.Network-Grade Plugs and Outlets Highly durable construction ensures the efficient distribution of power in demanding IT or industrial environments to servers, equipment, and connected devices.1U Form Factor & Mounting Hardware The 1U form factor is made to be mounted in a standard server rack. Mounting hardware allows the PDU to be connected to a UPS for tower configurations.Durable Metal Housing Protects internal components and resists damage from impact or abrasions within challenging industrial environments. Also extends the life of the product.Three-Year Limited Warranty Covers defects in materials and workmanship in the product under normal use and conditions. See warranty for details. What's In The Box PDU, 6-ft. utility cord, 3.3-ft. UPS cord, 2 Rackmount Brackets, 4 Flat Head Screws M4X8L, 4 Pan Head Screws M5X12L, User Manual, Registration Card

In stock

Remote emergency power off (REPO) rack PDUs enable immediate and complete power off control from one button. These PDUs are hardwired and the power off switch can be housed anywhere in the data center for quick and easy access, should the need for immediate shutdown arise.

In stock

The PDUMNV20LX 1.9kW Single-Phase Monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via built-in network connection. Recommended for any IT or industrial application, it features 24 NEMA 5-15/20R outlets with included cord retention brackets to prevent cables from becoming accidentally disconnected. A 10-foot cord with NEMA L5-20P plug and 5-20P adapter connects the PDU to a compatible AC power source, generator or protected UPS.The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.A digital ammeter allows you to monitor the PDU's current level in real time to ensure it remains well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.

In stock

Tripp Lite Metered PDU / Power Distribution Unit with Isobar Surge Suppression offers real-time local reporting of load level in amps, plus premium ISOBAR network-grade AC surge and noise suppression. Digital display continuously reports PDU output current to prevent circuit overloads as additional equipment is added. Set of 3 front-panel LEDs provide notification of wiring fault, protection present and line OK status. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.

In stock

Eaton Managed ePDUs allow you to monitor and control critical factors such as voltage, current and power factor. This level of information allows you to make the right decision when it comes to energy consumption in your data center. Integrated with Eaton's management software, you can control these units from any computer on the network server.

In stock

The CyberPower PDU41008, a 16-outlet (front), 2U rackmount switched power distribution unit (PDU), provides 200-240V 30A output. It distributes power to twelve (12) IEC C13 receptacles and four (4) IEC C19 receptacles from a single NEMA L6-30P plug with unfiltered electrical pass-through. The switched outlet receptacles can be managed individually or collectively over the network, using the CyberPower Management Console, a web browser and the RJ45 Ethernet port for network connection, or locally by using the LCD controls. Outlets can be turned on, turned off, or recycled on demand or at programmed times to address a number of needs including remote rebooting of locked equipment, load shedding, power sequencing, and locking out unauthorized loads. The PDU41008 comes with a three-year limited warranty that covers defects in materials and workmanship in the product under normal use and conditions within three years of the purchase date. Power DistributionDelivers AC power to servers, equipment, and connected devices via a power distribution unit.Switch-Free DesignSafeguards against accidental power shutdown.Switchable OutletsProvides local and remote control for individual and multiple outlets. Local control: turn on/turn off outlets and disable unused outlets. Remote control: restart outlets and devices, turn on/turn off, schedule power on/off sequencing, and disable unused outlets.CyberPower Management ConsoleBuilt into Switched PDUs, a CyberPower Management Console is a hardware interface. Users can remotely switch individual PDU outlets or circuits on and off, either immediately or on a schedule, in order to power cycle connected equipment. It monitors the incoming power and power draw from the PDU, sends notifications based on the power status, and logs events.Remote and Local MonitoringThe user is able to track PDU vitals both offsite and onsite. It also provides control to turn on/off individual outlets or circuits.Automatic Event NotificationsProvide immediate updates about power events via email, SMS text, or SNMP traps.Upgradeable FirmwareDownloadable improvements (firmware updates) to programs that run the PDU.Power Control DisplayProvides up-to-date status information about the PDU and power situation and allows for local set-up and configuration.Network-Grade Plugs and OutletsHighly durable construction ensures the efficient distribution of power in demanding IT or industrial environments to servers, equipment, and connected devices.Long Input Power CordReaches distant power sources, allowing the PDU to be placed where it's needed.Cord Retention TraySecures power cords, keeping them organized and accessible. Helps cords stay plugged in.Configurable Mounting BracketsAllow for installation of the PDU in the following configurations: 0U (vertical, under counter, and wall mount), 1U (horizontal, vertical, under counter, and wall mount), and 2U (horizontal and wall mount).Durable Metal HousingProtects internal components and resists damage from impact or abrasions within challenging industrial environments. Also extends the life of the product.Three-Year Limited WarrantyCovers defects in materials and workmanship in the product under normal use and conditions within three years of the purchase date. See warranty for details.

In stock

APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. Switched outlets to turn outlets on or off remotely. Outlet and PDU level power metering for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparreled deployment flexibility. Maximum outlet density with 42 outlets in a 2.2" wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected.

In stock

Minuteman offers high-quality power distribution solutions for IT equipment in network closets and data centers. The OE series features lengthy power cords, versatile configuration options, and a host of premium features, all at an incredible value. Minuteman's robust PDU line offers products ranging in capacity from 15 to 30 Amps, in both vertical and horizontal orientations. In addition, select models feature surge suppression and load metering. OEPD power cords are strain-relieved with molded plugs and use heavy-gauged cables. All models have an external ground stud.OE Standard Features: Longer power cords Most Minuteman PDU units have 15-ft power cords, eliminating the need for 6-, 8-, or 10-ft alternatives More standard outlets Minuteman PDU units have 6, 8, 10, 14, 18, 20, or 24 outlets. Most of the Minuteman PDUs have additional front outlets for improved access Configuration versatility Minuteman PDU units have a multi-form factor with 1U and 0U configurations allowing for either horizontal or vertical placement. 1U products ship with a stand-off mounting bracket, at no additional cost, that allows for vertical installation on most racks and enclosures Locking input plugs (L) Select models (L) feature locking input plugs for added security Surge protection (OES) OES models provide surge protection for connected devices Load-metering (A) Amp-metered units (A) are available to display connected equipment loads High standards PDUs are listed with higher UL 60950-1 standard. All PDUs are compatible with any data center or network installation UL 60950-1 White Paper Cost-effective More outlets, longer cords, and more features are what make the OEPD Series the best value today. The features are all standard with the series Higher reliability Designed to provide maximum uptime, Minuteman PDUs' switchless design and on/off LEDs provide greater MTBF (Mean Time Between Failure) Protected investment Minuteman surge-protected (OES) PDUs carry a limited lifetime warranty and a $50,000 Minuteman Platinum Protection Plan (US and Canada only)

In stock

Minuteman offers high-quality power distribution solutions for IT equipment in network closets and data centers. The OE series features lengthy power cords, versatile configuration options, and a host of premium features, all at an incredible value. Minuteman's robust PDU line offers products ranging in capacity from 15 to 30 Amps, in both vertical and horizontal orientations. In addition, select models feature surge suppression and load metering. OEPD power cords are strain-relieved with molded plugs and use heavy-gauged cables. All models have an external ground stud. OE Standard Features: Longer power cordsMost Minuteman PDU units have 15-ft power cords, eliminating the need for 6-, 8-, or 10-ft alternatives More standard outletsMinuteman PDU units have 6, 8, 10, 14, 18, 20, or 24 outlets. Most of the Minuteman PDUs have additional front outlets for improved access Configuration versatilityMinuteman PDU units have a multi-form factor with 1U and 0U configurations allowing for either horizontal or vertical placement. 1U products ship with a stand-off mounting bracket, at no additional cost, that allows for vertical installation on most racks and enclosures Locking input plugs (L)Select models (L) feature locking input plugs for added security Surge protection (OES)OES models provide surge protection for connected devices Load-metering (A)Amp-metered units (A) are available to display connected equipment loads High standardsPDUs are listed with higher UL 60950-1 standard. All PDUs are compatible with any data center or network installationUL 60950-1 White Paper Cost-effectiveMore outlets, longer cords, and more features are what make the OEPD Series the best value today. The features are all standard with the series Higher reliabilityDesigned to provide maximum uptime, Minuteman PDUs' switchless design and on/off LEDs provide greater MTBF (Mean Time Between Failure) Protected investmentMinuteman surge-protected (OES) PDUs carry a limited lifetime warranty and a $50,000 Minuteman Platinum Protection Plan (US and Canada only)

In stock

Minuteman offers high-quality power distribution solutions for IT equipment in network closets and data centers. The OE series features lengthy power cords, versatile configuration options, and a host of premium features, all at an incredible value. Minuteman's robust PDU line offers products ranging in capacity from 15 to 30 Amps, in both vertical and horizontal orientations. In addition, select models feature surge suppression and load metering. OEPD power cords are strain-relieved with molded plugs and use heavy-gauged cables. All models have an external ground stud. OE Standard Features: Longer power cordsMost Minuteman PDU units have 15-ft power cords, eliminating the need for 6-, 8-, or 10-ft alternatives More standard outletsMinuteman PDU units have 6, 8, 10, 14, 18, 20, or 24 outlets. Most of the Minuteman PDUs have additional front outlets for improved access Configuration versatilityMinuteman PDU units have a multi-form factor with 1U and 0U configurations allowing for either horizontal or vertical placement. 1U products ship with a stand-off mounting bracket, at no additional cost, that allows for vertical installation on most racks and enclosures Locking input plugs (L)Select models (L) feature locking input plugs for added security Surge protection (OES)OES models provide surge protection for connected devices Load-metering (A)Amp-metered units (A) are available to display connected equipment loads High standardsPDUs are listed with higher UL 60950-1 standard. All PDUs are compatible with any data center or network installationUL 60950-1 White Paper Cost-effectiveMore outlets, longer cords, and more features are what make the OEPD Series the best value today. The features are all standard with the series Higher reliabilityDesigned to provide maximum uptime, Minuteman PDUs' switchless design and on/off LEDs provide greater MTBF (Mean Time Between Failure) Protected investmentMinuteman surge-protected (OES) PDUs carry a limited lifetime warranty and a $50,000 Minuteman Platinum Protection Plan (US and Canada only)

In stock

Minuteman offers high-quality power distribution solutions for IT equipment in network closets and data centers. The OE series features lengthy power cords, versatile configuration options, and a host of premium features, all at an incredible value. Minuteman's robust PDU line offers products ranging in capacity from 15 to 30 Amps, in both vertical and horizontal orientations. In addition, select models feature surge suppression and load metering. OEPD power cords are strain-relieved with molded plugs and use heavy-gauged cables. All models have an external ground stud. OE Standard Features: Longer power cordsMost Minuteman PDU units have 15-ft power cords, eliminating the need for 6-, 8-, or 10-ft alternatives More standard outletsMinuteman PDU units have 6, 8, 10, 14, 18, 20, or 24 outlets. Most of the Minuteman PDUs have additional front outlets for improved access Configuration versatilityMinuteman PDU units have a multi-form factor with 1U and 0U configurations allowing for either horizontal or vertical placement. 1U products ship with a stand-off mounting bracket, at no additional cost, that allows for vertical installation on most racks and enclosures Locking input plugs (L)Select models (L) feature locking input plugs for added security Surge protection (OES)OES models provide surge protection for connected devices Load-metering (A)Amp-metered units (A) are available to display connected equipment loads High standardsPDUs are listed with higher UL 60950-1 standard. All PDUs are compatible with any data center or network installationUL 60950-1 White Paper Cost-effectiveMore outlets, longer cords, and more features are what make the OEPD Series the best value today. The features are all standard with the series Higher reliabilityDesigned to provide maximum uptime, Minuteman PDUs' switchless design and on/off LEDs provide greater MTBF (Mean Time Between Failure) Protected investmentMinuteman surge-protected (OES) PDUs carry a limited lifetime warranty and a $50,000 Minuteman Platinum Protection Plan (US and Canada only)

In stock

Minuteman offers high-quality power distribution solutions for IT equipment in network closets and data centers. The OE series features lengthy power cords, versatile configuration options, and a host of premium features, all at an incredible value. Minuteman's robust PDU line offers products ranging in capacity from 15 to 30 Amps, in both vertical and horizontal orientations. In addition, select models feature surge suppression and load metering. OEPD power cords are strain-relieved with molded plugs and use heavy-gauged cables. All models have an external ground stud. OE Standard Features: Longer power cordsMost Minuteman PDU units have 15-ft power cords, eliminating the need for 6-, 8-, or 10-ft alternatives More standard outletsMinuteman PDU units have 6, 8, 10, 14, 18, 20, or 24 outlets. Most of the Minuteman PDUs have additional front outlets for improved access Configuration versatilityMinuteman PDU units have a multi-form factor with 1U and 0U configurations allowing for either horizontal or vertical placement. 1U products ship with a stand-off mounting bracket, at no additional cost, that allows for vertical installation on most racks and enclosures Locking input plugs (L)Select models (L) feature locking input plugs for added security Surge protection (OES)OES models provide surge protection for connected devices Load-metering (A)Amp-metered units (A) are available to display connected equipment loads High standardsPDUs are listed with higher UL 60950-1 standard. All PDUs are compatible with any data center or network installationUL 60950-1 White Paper Cost-effectiveMore outlets, longer cords, and more features are what make the OEPD Series the best value today. The features are all standard with the series Higher reliabilityDesigned to provide maximum uptime, Minuteman PDUs' switchless design and on/off LEDs provide greater MTBF (Mean Time Between Failure) Protected investmentMinuteman surge-protected (OES) PDUs carry a limited lifetime warranty and a $50,000 Minuteman Platinum Protection Plan (US and Canada only)

In stock

Like Being Everywhere, All the Time The RPM EV6 and LCD series of products are IP-addressable RPMs that allow administrators and technicians to remotely control the power to connected servers, network equipment, and security devices, eliminating the need for expensive and time-consuming service calls to reboot unresponsive locked-up devices. Each RPM EV6 and LCD PDU also has the capability to perform scheduled shutdowns and startups, offering additional cost savings via reduced energy consumption. When a device experiences a lock-up, the RPM-EV6 and LCD series can automatically notify administrators and users via email or SNMP traps, while also allowing user-configurable actions. Under Control from Anywhere Minuteman RPMs offer a secure connection that is accessible from any device with a standard internet browser, including desktop and laptop PCs, smartphones, and tablets. From these devices, users can control and configure all aspects of the device, including: Network Connection: The RPM is a smart IP-based PDU that connects to your network via CAT5 cable Control Individual Outlets: Power on/off, reboot, and monitor up to 24 individual devices from a single IP address Scheduled Management Actions: save power with automatic shutdown and startup of devices over weekends or holidays Notifications via SNMP or Email: To keep you informed of events such as a server shutdown, the RPM can submit its notifications via email to up to three addresses RPM Benefits Utilizing Minuteman's remote power manager products allows technicians and administrators to: Save Time: Reboot remote devices in seconds, not minutes or hours Increase Productivity: Eliminate help desk calls & lost time when a device locks up: RPM notifies & provides automatic reboot capabilities Cut Costs: Eliminate service calls to remote locations by managing devices from your computer or smartphone

In stock

Save Time & Cut Costs with RPM The Minuteman RPM (Remote Power Manager) family is the ultimate power nerve center for controlling multiple network devices and services. With a single Minuteman RPM, you can individually control AC power for up to sixteen connected devices such as servers, switches, routers, modems, and telephone systems.

In stock

The Minuteman® line of power distribution, power protection, and power management products have features and capabilities included in the standard product that increase the versatily of the products. This reduces the need for custom, non-standard configurations and allows for a better availabilty of products to fill your needs.

In stock

ABC's UPS replacement battery assemblies are 20% - 70% less expensive than OEM Batteries. Our batteries will give you top performance with double the standard industry warranty. ABC stands behind its product and offers a full 2 year warranty. This will save you money at time of purchase and reduce the number of times you need to purchase a replacement battery for your UPS units. Over the life of the UPS, this could save you hundreds of dollars.

In stock

The RB1290X3B UPS Replacement Battery Cartridge restores life to CyberPower UPS systems that have weak or completely depleted internal batteries. The RB1290X3B contains three 12V/9Ah batteries, certified to meet or exceed original manufacturer specifications. This leak-proof, sealed lead-acid battery never requires replacement fluid. The pre-assembled cartridge installs easily into your CyberPower UPS system and is shipped with reusable packaging for delivering expired batteries to a suitable recycling center. The RB1290X3B comes with instructions, recycling information, and an eighteen-month warranty.

In stock

Ensure continued operation of critical devices with the CyberPower PDU44005 Switched ATS PDU. Ideal for data centers and network closets, this unit provides power redundancy to single-corded connected equipment. If power for the primary source exceeds the lower or upper thresholds, or if power fails, the PDU will switch to the secondary power source to ensure continuous operation. The PDU will switch back to the primary power source when incoming power becomes stable. Additionally, this unit offers real time remote and local monitoring and outlet management. The PDU44005 supports inputs between 200-240V and includes (8) IEC C13 and (2) IEC C19 outlets. Dual IEC C20 power cords are plugged into separate power sources (A and B), and information about each power source is clearly displayed on the front panel LED indicator lights. Other features include an LCD with selectable background color, built-in web interface, and power event notifications. The CyberPower PDU44005 is protected by a three-year limited warranty.

In stock

Ensure continued operation of critical devices with the CyberPower PDU44004 Switched ATS PDU. Ideal for data centers and network closets, this unit provides power redundancy to single-corded connected equipment. If power for the primary source exceeds the lower or upper thresholds, or if power fails, the PDU will switch to the secondary power source to ensure continuous operation. The PDU will switch back to the primary power source when incoming power becomes stable. Additionally, this unit offers real time remote and local monitoring and outlet management. The PDU44004 supports inputs between 200-240V and includes (12) IEC C13 outlets. Dual IEC C14 power cords are plugged into separate power sources (A and B), and information about each power source is clearly displayed on the front panel LED indicator lights. Other features include an LCD with selectable background color, built-in web interface, and power event notifications. The CyberPower PDU44004 is protected by a three-year limited warranty.

In stock

The RB1270X2E UPS Replacement Battery Cartridge restores life to CyberPower UPS systems that have weak or completely depleted internal batteries. The RB1270X2E contains two 12V/7Ah batteries, certified to meet or exceed original manufacturer specifications. This leak-proof, sealed lead-acid battery never requires replacement fluid. The pre-assembled cartridge installs easily into your CyberPower UPS system and is shipped with reusable packaging for delivering expired batteries to a suitable recycling center. The RB1270X2E comes with instructions, recycling information, and an eighteen-month warranty.

In stock

The Vertiv Liebert POD PD2-104 is a power output distribution (POD) unit with built-in maintenance bypass feature. Designed for the GXT4 8-10kVA uninterruptible power supply (UPS) models, it is a POD that allows you to conduct UPS maintenance or replacements without power interruption to the connected load. It also automatically transfers the current from the UPS to the original power source in cases of UPS failures, saving your equipment from unnecessary downtimes and ensuring continuous uptime for your system. The PD2-104 is a plug-and-play unit that will replace the existing POD box on your UPS. It has four NEMA 5-20R, two NEMA L6-30R, and two NEMA L6-20R output connectors and is equipped with a 2PH+N+G Hardwire 4-wire input connector. It also has a circuit breaker and supports a max current of 60A. More from the Manufacturer

In stock

ABC's UPS replacement battery assemblies are 20% - 70% less expensive than OEM Batteries. Our batteries will give you top performance with double the standard industry warranty. ABC stands behind its product and offers a full 2 year warranty. This will save you money at time of purchase and reduce the number of times you need to purchase a replacement battery for your UPS units. Over the life of the UPS, this could save you hundreds of dollars. All products are tested twice before shipment and all are assembled in the USA

In stock

Offers real-time remote monitoring of voltage, frequency and load levels via built-in network connection. The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. PDU lighted digital display enables visual monitoring of PDU output current to prevent circuit overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.

In stock

The BTI Replacement Battery RBC116 for APC is a reliable and high-performance UPS battery pack. With an 18-month limited warranty, you can trust that this battery will provide long-lasting power for your APC UPS. It is compatible with a range of APC UPS models, including the SMX1000C, SMX1000, SMX750CNC, SMX750C, SMX1000US, SMX750NC, and SMX750-NMC. This battery pack is not only powerful but also environmentally friendly, with WEEE and China RoHS environmental certifications. Manufactured by Battery Technology, Inc, a trusted brand in the industry, this UPS battery pack is designed to deliver reliable performance. With an output voltage of 12 V DC and a battery capacity of 7200 mAh, it provides ample power to keep your devices running smoothly. The lead acid battery chemistry ensures a sealed and spill-proof design, making it safe and easy to use. Upgrade your APC UPS with the BTI Replacement Battery RBC116 for APC and enjoy uninterrupted power supply and peace of mind.

In stock

The Vertiv Liebert POD PD2-102 is a power output distribution (POD) unit with built-in maintenance bypass feature. Designed for the GXT4 8-10kVA uninterruptible power supply (UPS) models, it is a POD that allows you to conduct UPS maintenance or replacements without power interruption to the connected load. It also automatically transfers the current from the UPS to the original power source in cases of UPS failures, saving your equipment from unnecessary downtimes and ensuring continuous uptime for your system. The PD2-102 is a plug-and-play unit that will replace the existing POD box on your UPS. It has four NEMA 5-20 and four NEMA L6-30 output connectors and is equipped with a 2PH+N+G Hardwire 4-wire input connector. It also has a circuit breaker and supports a max current of 60A. More from the Manufacturer

In stock

Ensure continued operation of critical devices with the CyberPower PDU44007 Switched ATS PDU. Ideal for data centers and network closets, this unit provides power redundancy to single-corded connected equipment. If power for the primary source exceeds the lower or upper thresholds, or if power fails, the PDU will switch to the secondary power source to ensure continuous operation. The PDU will switch back to the primary power source when incoming power becomes stable. Additionally, this unit offers real time remote and local monitoring and outlet management.The PDU44007 supports inputs between 200-240V and includes (16) IEC C13, (2) IEC C19, and (1) NEMA L6-30R outlets. Dual NEMA L6-30P power cords are plugged into separate power sources (A and B), and information about each power source is clearly displayed on the front panel LED indicator lights. Other features include an LCD with selectable background color, built-in web interface, and power event notifications. The CyberPower PDU44007 is protected by a three-year limited warranty.

In stock

Basic Rack 4.99kVA PDU which allow users to distribute power outlets to rack-mount equipment with single input power source. APC now offers Basic Rack PDUs that mount veritcally, without tools in the rear channel of a NetShelter VX.

In stock

The PDU3EVN10G60B 14.5kW 3-Phase Monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via built-in network connection. These advanced remote capabilities can save you money and reduce downtime.Recommended for your IT or industrial application, the monitored PDU features 48 outlets-42 C13, 6 C19-with included plug-lock insert sleeves to prevent cables from becoming accidentally disconnected. A 10-foot cord with IEC 309 60A Blue (3P+E) input plug connects the 3-phase PDU to a compatible AC power source, generator or protected UPS.The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.A color touchscreen LCD lets you toggle between menus to input current level per phase and output current per load bank with ±1% billing-grade accuracy, environmental sensor data and network information. It also generates a unique QR code to allow access to the PDU through a mobile device.

In stock

Tripp Lite single phase Metered PDU / Power Distribution Units offer real-time local reporting of load level in amps via built-in digital display. Enables visual monitoring of PDU load levels to prevent overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.

In stock

Tripp Lite single phase Monitored PDU / Power Distribution Unit offers real-time remote monitoring of voltage, frequency and load levels via built-in network connection. LX Platform interface supports custom notification of user-specified remote conditions via email, secure web, SNMP, Telnet or SSH interface. PDU lighted digital display enables visual monitoring of PDU output current to prevent circuit overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.

In stock

Smart-UPS accessories include various backplate PDU options, external standard and switched PDU options, matching battery cabinets for extending run time(Smart-UPS XL only), management devices, service products and mounting options. These accessories can customize your solution to increase availability, adaptability, serviceability, manageability and performance.

In stock

Eaton Metered Input ePDUs provide remote monitoring of the current draw of individual sections via network communication. This capability, combined with state-of-the-art software allows you to aggregate the information from many ePDUs in one location. A local display is also available for phase balancing and for easy start-up and provisioning of servers. New ePDU G3Metered Input models feature best-in-class technologies, including ±1% billing grade accuracy, an advanced LCD pixel display, a hot-swap meter and the ability to daisy chain four ePDUs to share the same network connection and IP address.

In stock

Tripp Lite Metered PDU / Power Distribution Units offer real-time local reporting of load level in amps via built-in digital meter. Enables visual current monitoring of PDU output current to prevent circuit overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.

In stock

The Vertiv Liebert PD5-006 is a power output distribution (POD) unit with built-in maintenance bypass feature. Designed for the GXT5 5-10kVA uninterruptible power supply (UPS) models, it is a POD that allows you to conduct repairs and maintenance on your UPS without power interruption to the connected load. It also automatically transfers the current from the UPS to the original power source in cases of UPS failures, saving your equipment from unnecessary downtimes. The PD5-006 is a plug-and-play unit that will replace the existing POD box on the back of our UPS. It has four NEMA L6-20R output connectors and is equipped with a NEMA L14-30P input connector. More from the Manufacturer

In stock

The RB1270X4J UPS Replacement Battery Cartridge restores life to CyberPower UPS systems that have weak or completely depleted internal batteries. The RB1270X4J contains four 12V/7Ah batteries, certified to meet or exceed original manufacturer specifications. This leak-proof, sealed lead-acid battery never requires replacement fluid. The pre-assembled cartridge installs easily into your CyberPower UPS system and is shipped with reusable packaging for delivering expired batteries to a suitable recycling center. The RB1270X4J comes with instructions, recycling information, and an eighteen-month warranty. UPS CompatibilityOR1500LCDRT2U

In stock