2-fiber OM4 10 GbE patch cord, riser (OFNR) rated, LC duplex to LC duplex, 1.6mm jacket, Std. IL. 5 meters.

In stock

Tripp Lites Mode Conditioning Cables are designed for use in Gigabit Ethernet 1000BASE-LX applications. N425-Series cables convert a Singlemode LC GBIC to an SC Multimode patch bay. They are fully compliant with IEEE 802.3z application standards. Mode Conditioning Cables are needed in applications where high-speed Gigabit 1000BASE-LX routers and switches are being deployed into existing Multimode plants. The need for this patch cord is due to the single-mode launch nature of the -LX or long-wave (1300 nm) transceiver modules used for Gigabit Ethernet. Launching a single-mode laser into the center of a multimode fiber can cause multiple signals to be generated that confuses the receiver at the other end of the fiber. These multiple signals, caused by Differential Mode Delay (DMD) effects, severely limit the cable distance lengths for operating Gigabit Ethernet. A mode conditioning patch cord eliminates these multiple signals by allowing the single-mode launch to be offset away from the center of a multimode fiber.

In stock

This is a 3m LC (male) to ST (male) yellow duplex riser-rated fiber patch cable. OS2 is a standard single-mode optical fiber commonly used with wavelengths of 1310nm and 1550nm (9/125 microns), and has a maximum attenuation of 1dB/km. The OS2 standard is defined in ISO/IEC 11801. This optical fiber, nonconductive, riser (OFNR) cable is best suited for use in interior fiber-optic applications. A duplex cable is a two-strand fiber optic patch cable that works best with transceivers that both transmit and receive. Our patch cables are 100% compliant for all of your networking needs. Our products are guaranteed by federal law to not affect or void OEM warranties.

In stock

Available in ST, SC, LC, and MT-RJ connector styles. Duplex MT-RJ connectors are smaller than standard SC connectors, and feature the familiar "RJ"latch.

In stock

Black Box's Connect line of general-purpose OM3 50/125 multimode cabling is constructed to meet or exceed TIA/EIA industry standards, providing you the functionality you need without the premium price. With support for 10Gbase-SR and 10Gbase-LRM, you can connect all of your 10G SFP+ transceivers while maintaining backward compatibility with existing 50/125 multimode equipment. Aqua in color, they are easy to distinguish from orange-colored OM1/OM2 cabling. These cables are constructed of 2.0-mm duplex zipcord style cabling. They feature an OFNR PVC jacket that is certified for use in riser applications to prevent the spread of fire from floor to floor. Additionally, we perform 100 percent testing during production to ensure every one of our cables provides the utmost performance and protection in any application.

In stock

Tripp Lite's new OM4 enter it-Optimized Multimode Fiber Laser (LOMMF) "Aqua" cables, For Use With 40/100Gb Ethernet applications. These new technology, 50/125um, LC / LC Fiber Optic cables, three times the Provide Nearly bandwidth multimode fiber over 62.5um Conventional, With performance rivaling That of Singlemode cable, at a much reduced cost. Cable LOMMF allows serial transmission over extended 40/100Gb distances in the 850nm wavelength window, where, low-cost Vertical Cavity Surface Emitting Lasers (VCSELs) enable a cost-effective, high-bandwidth solution. Ideally suited for LOMMF is LAN's, SAN's, and high-speed parallel Interconnects for head-ends, central offices, and data centers. Tripp Lite warrants this product to be free from defects in material and workmanship for Life.

In stock

Use with either LED or laser light sources. With a laser light source, bandwidth increases to 2000 MHz/km.

In stock

Black Box's Connect line of general-purpose OM1 62.5/125 multimode cabling is constructed to meet or exceed TIA/EIA industry standards, providing you the functionality you need without the premium price. With support for high-bandwidth Gigabit and 10-Gigabit communications, you can connect all of your OM1 62.5/125 multimode transceivers to switches, servers, and other high-performance networking equipment. These cables are constructed of 2.0-mm duplex zipcord style cabling. They also feature an OFNR PVC jacket that is certified for use in riser applications to prevent the spread of fire from floor to floor. Additionally, we perform 100 percent testing during production to ensure every one of our cables provides the utmost performance and protection in any application.

In stock

The N820-25M-OM4 10 Gb/100 Gb Duplex Multimode 50/125 OM4 LSZH Fiber Patch Cable is OM4-rated for use with 40/100 Gb Ethernet applications up to 300 meters (@ 850 nm). For fast, clear signal transmission through your local area network (LAN) or storage area network (SAN), this high-speed, low-cost cable provides three times more bandwidth than conventional 62.5 µm multimode fiber and performance rivaling that of singlemode cable. Backward compatible with existing 50/125 fiber, the aqua-colored N820-25M-OM4 is manufactured using top-quality materials. Dual male LC connectors are widely compatible and thoroughly tested to meet stringent insertion loss standards. It has 50/125 duplex (zipcord) fiber made from glass and a low-smoke zero-halogen (LSZH) jacket, which limits the amount of toxic smoke emitted in case of combustion, making this cable perfect for poorly ventilated areas. This laser-optimized multimode fiber (LOMMF) cable is ideal for LANs, SANs and high-speed parallel interconnects for head-ends, central offices and data centers. It's commonly used with vertical-cavity surface-emitting laser (VCSEL) and LED laser light sources. Complies with IEEE 802.3ae and TIA LOMMF standards.

In stock

The N370-03M-T Duplex Singlemode 9/125 Fiber Patch Cable (LC/LC) transmits fast, clear data signals through your LAN with data transfer speeds up to 10 Gbps. Designed for network equipment that requires singlemode fiber optic patch cables, this three-meter (10-foot) cable has attenuation loss that meets or exceeds current standards. It has 9/125 duplex (zipcord) fiber made from glass, instead of polymer. The sturdy LC male connectors meet stringent insertion loss standards and feature beveled edges on their glass ends for easy insertion into a patch panel or switch. Push/pull tab connectors are easily accessible in high-density data center applications and make the FDDI-rated cable easy to install and remove with one hand. The OFNR-rated PVC jacket is yellow to easily identify it as a singlemode cable. Features Fast, Clear Data Transmission Through Your LAN Data transfer speeds up to 10 Gbps Ideal for network equipment that requires singlemode fiber optic patch cables Attenuation loss meets or exceeds latest industry standards LC Connectors with Push/Pull Tabs Push/pull tab connectors easy to install and remove with one hand Sturdy dual LC connectors tested to meet stringent insertion loss standards Superior Construction for Error-Free Signal Transfer 9/125 duplex (zipcord) fiber made from glass Beveled edge on glass ends for easy plug insertion Yellow-colored for identification as singlemode FDDI- and OFNR-rated

In stock