The Emulex Gen 6 (16/32G) Fibre Channel (FC) Host Bus Adapters (HBAs) by Broadcom are designed to address the demanding performance, reliability and management requirements of modern networked storage systems that utilize high performance and low latency solid state storage drives and hard disk drive arrays. Fibre Channel is known as the gold standard for network storage connectivity in enterprise and cloud deployments. The latest Emulex Gen 6 FC HBAs with Dynamic Multi-core architecture offer higher performance, lower latency, enhanced diagnostics and manageability that benefit both 16GFC and 32GFC environments. The unique Emulex Dynamic Multi-core architecture delivers unparalleled performance and more efficient port utilization than other HBAs by applying all ASIC resources to any port that needs it. Compared to the previous generation, Emulex Gen 6 HBAs deliver 2x greater bandwidth - 12,800MBps (2 ports 32GFC, or 4 ports 16GFC, full duplex), less than half the latency, and support an industry-leading 1.6 million IOPS per adapter. The quad-port LPe32004 delivers up to 3.2 million IOPS per adapter. The adapters are NVMe over Fabrics-enabled, delivering an additional 55% lower latency than SCSI, and support NVMe over Fabrics and SCSI concurrently. Emulex LPe31000-series HBAs are available with single, dual or quad 16GFC optics that can be upgraded with 32GFC optics later to utilize the full performance of Gen 6 FC technology. A second quad-port 16GFC model is available that features a low-profile design. It provides the highest port density within a low-profile form factor (optics are not upgradeable). The LPe32000-series is available with single, dual or quad 32GFC optics.

In stock

Tripp Lite's 75-ft. Blue snagless category 5e (Cat5e) patch cable has 2 snagless RJ45 molded male connectors featuring integral strain relief. The cable is manufactured from PVC 4-pair Solid Conductor UTP for improved long run performance, and is rated for 350MHz/1Gbps communication. All cables are offered in a variety of lengths and colors for all category 5 (Cat5) and 5e cabling needs. Standard category 5e patch cables are also available.

In stock

The HP Ethernet 10Gb 2-port 530 SFP+ is a dual port adapter featuring the next generation of 10Gb Ethernet integration offering a single chip solution further reducing power requirements for 2 ports of 10Gb Ethernet connectivity. It is designed for use in HP ProLiant Gen8 Rack and Tower servers.Leveraging Broadcom's market-proven NetXtreme II architecture and software, the HP 530SFP+ adapter delivers full line-rate performance across all ports with low power consumption.The HP 530SFP+ dual-port design is ideal for high performance computing, server virtualization, security, server consolidation, and other applications requiring highest throughput. The total aggregate, full-duplex throughput of 40Gb/s meets the needs for customers desiring highest bandwidth.

In stock

The Allied Telesis GS910 Series offers unmanaged Gigabit switching solutions for the desktop, and small networks. The series has internal and external power supply versions, and also features network loop guard technology, which automatically detects any unexpected network loops, and prevents network devices from broadcast packet storms.OverviewWith minimal to no set-up, GS910 Series switches provide simple and seamless connectivity to existing network infrastructure.High performanceThe GS910 Series delivers the high speed and high performance demanded by today's high-bandwidth applications, such as video, graphics and industrial design.Quality and reliabilityAllied Telesis is a world-wide leader in unmanaged Ethernet switches. Shipping more than 250,000 unmanaged switches every year, Allied Telesis offers proven reliability, and industry-recognized quality.Loop detectionGS910 Series switches provide network loop detection by using Loop Detection Frame (LDF). LDF detects network loops, and shuts down ports where the loop is detected. After the loop is solved, the port that has shut down is automatically recovered.Environmentally-friendly eco-switchAllied Telesis GS910 Series eco-friendly switches conform with the Allied Telesis commitment to environmentally-friendly processes and products. They are designed to minimize power consumption through the use of a high-efficiency power supply and a low-power chipset. With low power consumption and a reduction in power outside regular work hours (overnight mode), as well as other power-saving features included as standard, the Allied Telesis GS910 Series truly lives up to its eco-friendly reputation. Not only does this help the planet by reducing the carbon footprint of each switch, it also lowers the Total Cost of Ownership (TCO) to the user, as the device costs less to run, and features improved reliability.

In stock

With Tripp Lite's new category 6 molded patch cables you can stay ahead of the game by using this high-speed cable to distribute data, voice and video. These cables deliver stable performance up to 550MHz. Each comes UL verified meets EIA/TIA Cat6 TIA/EIA-568-B-2.1 draft 9 standards. Constructed with high-quality copper wire and a staggered-pin plug design, near-end crosstalk levels are kept to a minimum. Designed for use in category 6, category 5e and category 5 applications. Cat6 cables are available in a variety of colors with a snagless boot preventing cable snags. Tripp Lite warrants this product to be free from defects in materials and workmanship for life.

In stock

Belkin CAT6 exceeds requirements of TIA/EIA-568-B.2-1 and ISO/IEC 11801. It is ideal for high-end solutions such as Gigabit Ethernet, 1.2Gbps ATM, and broadband video. This Cable consists of eight solid 24AWG wires and a separator to separate four pairs.

In stock

Axiom's family of network server adapters provide a wide-range of solutions to boost network performance and improve IT flexibility. Available band-widths range from 100Mbs to 100Gbs on interfaces ranging from 32-Bit PCI to PCIe 4.0 x16. Each adapter provides standard connector options from single port, dual port, quad ports in copper and/or fiber-based connections. Axiom network interface cards accelerate applications with enterprise-proven connectivity. These solutions are available for designated branded OEM systems. Each Axiom network adapter is 100-percent tested to ensure long-term reliability and performance in high transaction and mission-critical applications. Optimized for virtualization. Maximizes I/O consolidation with high performance ports. Leverages and protects existing IT investments. Delivers cost reductions in operating expense and total cost expense. Provide connectivity and scalability required for enterprise environments. Deliver enterprise-class connectivity. Supports both data and storage I/O with an adapter that can integrate with your existing Fibre Channel and Ethernet networks, extending the value of your network investments. Achieve convergence - Run concurrent TCP/IP and storage (iSCSI or Fibre Channel) traffic over a single link. Includes Full Height and Half Height Mounting Brackets

In stock

This is a 91cm (3.0ft) RJ-45 (male) to RJ-45 (male) black Cat6 UTP PVC-rated patch straight cable that is used for high speed data transfer. Our patch cables are 100% compliant for all of your networking needs and are guaranteed by federal law to not affect or void OEM warranties.

In stock

Cost-effective entry-level 10GbE Switch with 10G SFP+ fiber and Gigabit Ethernet The QSW-308S is a 3-port 10G SFP+ and 8-port Gigabit Unmanaged Switch, allowing you to instantly upgrade to a hybrid high-speed network environment at a cost-effective price. With its desktop size and silent operation, the QSW-308S perfectly blends into homes and offices while providing high performance, low latency and superb functionality. The QSW-308S provides three 10GbE SFP+ ports and eight Gigabit ports for connecting various devices. The unique fanless design with ventilated construction provides silent operations while maintaining high performance. Simply connect the QSW-308S to your devices and it will do the rest. It supports auto-negotiation for optimal speed and duplex detection when connecting different devices. Flexible deployment with multiple 10G SFP+ fiber and Gigabit ports The QSW-308S provides three 10GbE SFP+ ports and eight Gigabit ports for connecting various devices and enabling a hybrid high-speed network in homes and offices. With SFP+ interfaces, direct attach copper (DAC) cables can be used for connecting directly to SFP+ devices. You can also use 10G-SFP-T copper transceiver modules to connect 10GBASE-T/NBASE-T™ devices through RJ45 Category 6, 5 or 5e cabling. The switching capacity of QSW-308S is 76Gbps, guaranteeing the full potential of each port. Improve your productivity with a 10GbE-enabled QNAP NAS Many QNAP NAS series are designed with 10GbE readiness, and can be immediately upgraded by purchasing and installing a 10GbE network adapter. QNAP NAS are also available with 10GbE SFP+ and 10GBASE-T as standard to fully support 10GbE high-speed networks, making them beneficial for IOPS-demanding applications such as virtualization, databases, high-resolution video editing, and sharing workflows. Easily build a High-Speed Network with QNAP Network Adapters QNAP provides a wide range of network devices to assist business and home users with upgrading their network infrastructure to meet growing bandwidth requirements. QNAP's Thunderbolt 3 to 10GbE Network Adapter provides a quick and budget-friendly method for laptops (and other upgrade-constrained devices) to take advantage of high-speed 10GbE connectivity. Cool and quiet operation The QSW-308S features a fanless design for silent operations. The unique ventilated construction assists in cooling while maintaining high performance. Desktop size for easy use in homes and offices With a compact and modern design, the QSW-308S fits perfectly alongside other devices in modern digital homes and offices. Featuring a delicate white polished or textured surface design, the QSW-308S helps users to easily identify each port. The flexible DC power connector also assists in universally deploying the QSW-308S.

In stock

ACP's industry-standard XFP is a hot-swappable input/output device that plugs into a Gigabit Ethernet slot, linking the port with the fiber-optic network. ACP's transceivers (GBIC, SFP, XFP and XENPAK) are 100% compliant for all of our networking product lines. ACP transceivers are factory loaded with OEM specific configuration data required for networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for seamless network performance.

In stock

Axiom's family of network server adapters provide a wide-range of solutions to boost network performance and improve IT flexibility. Available band-widths range from 100Mbs to 100Gbs on interfaces ranging from 32-Bit PCI to PCIe 4.0 x16. Each adapter provides standard connector options from single port, dual port, quad ports in copper and/or fiber-based connections. Axiom network interface cards accelerate applications with enterprise-proven connectivity. These solutions are available for designated branded OEM systems. Each Axiom network adapter is 100-percent tested to ensure long-term reliability and performance in high transaction and mission-critical applications. Optimized for virtualization. Maximizes I/O consolidation with high performance ports. Leverages and protects existing IT investments. Delivers cost reductions in operating expense and total cost expense. Provide connectivity and scalability required for enterprise environments. Deliver enterprise-class connectivity. Supports both data and storage I/O with an adapter that can integrate with your existing Fibre Channel and Ethernet networks, extending the value of your network investments. Achieve convergence - Run concurrent TCP/IP and storage (iSCSI or Fibre Channel) traffic over a single link. Includes Full Height and Half Height Mounting Brackets

In stock

Axiom's 10GbE Copper Network Adapters are the latest generation of high-performance PCIe 3.0 x8 Lane 10 Gigabit NIC Cards, based on the Intel XL710 controller. The server adapter simplifies migration to 10 Gigabit Ethernet (GbE), Provides iSCSI FCoE Virtualization and Flexible Port Partitioning (FPP).Key Features: Low cost, low power, 10GbE performance for the entire datacenter. New generation single, dual and quad -port 1OGBASE-T controller with integrated MAC and PHY Standard CAT6a cabling with RJ45 connectors. Supports NBASE-T technology (2.5 and 5.0 GbE over CAT 5e) Backward compatibility with existing 1000BASE-T networks simplifies the transition to 10GbE. PCI Express - (PCIe) v3.0 with up to 8.0 GT/s Network Virtualization offloads including VXLAN, GENEVE, NVGRE, MPLS, and VXLAN-GPE with Network Service Headers (NSH) Excellent small packet performance for network appliances and Network Functions Virtualization (NFV)

In stock

Upgrade your network with a CAT6 Snagless Networking Cable from Belkin and enjoy clean, clear transmissions. Now you can replace CAT5 cables that don't support 100Base-T or gigabit Ethernet and improve the return loss in your current network by 40 percent. Engineered with 50-micron, gold-plated connectors to ensure clear transmissions and snagless molds to protect the RJ45 tab from damage during installation, this cable meets the performance requirements of Category 6.Belkin Build-To-Order Service: Belkin can manufacture virtually any cable type, length, or color. Contact your Belkin team today to get pricing and lead times.

In stock

CONNECT EASILY TO A COMPUTER NETWORK Access high-speed networks or the Internet with the Belkin CAT5e Ethernet Cable. This patch cable lets you connect your laptop or desktop computer to a wall outlet, modem, router, hub or another networking device. It meets the CAT5e standard and is suitable for use with 10/100/1000BASE-T networks. Patch cables are also handy in home offices and hotel rooms to establish a wired Internet connection. RJ45 PLUGS WITH GOLD-PLATED CONTACTS FOR A CLEAR SIGNAL The CAT5e Ethernet Cable features an RJ45 male connector on each end. Internal load bars ensure accurate plug positioning and consistent high performance, while 50-micron gold-plated connectors resist corrosion and wear and deliver a clean, clear signal. FAST, RELIABLE CONNECTIONS WITH CAT5E TECHNOLOGY Made with Unshielded Twisted Pair (UTP) stranded copper wires, this Cat 5 cable meets the CAT5e (Category 5 Enhanced) Ethernet network cable standard to support Ethernet speeds of up to 1000 Mbps. The wire pairs in CAT5e cables are twisted more tightly than those in CAT5 cables to reduce signal interference. LESS CROSSTALK WITH TWISTED PAIR WIRES The CAT5e Ethernet Cable features 4 Unshielded Twisted Pair (UTP) 24 AWG (American Wire Gauge) stranded copper wires to reduce electromagnetic interference. Stranded cables are more pliable than solid cables, making them better suited for travel. Plus, the wires are housed in a durable PVC outer jacket for abrasion and corrosion resistance.

In stock

The Panorama Antennas Antenna (LG-IN2445-W) is a high-quality antenna that is perfect for enhancing your cellular network connectivity. With its TAA compliance, this antenna meets the strict regulations required for government contracts, giving you peace of mind and assurance of its quality. Whether you're in a remote area or a busy urban environment, this antenna ensures reliable signal reception and transmission, allowing you to stay connected at all times. Its sleek white design seamlessly blends with any environment, making it a stylish addition to your setup. Upgrade your cellular network experience with the Panorama Antennas Antenna (LG-IN2445-W) and enjoy improved connectivity wherever you go.

In stock

The ENET DAC Network Cable (R0Z25A-2M-ENC) is a high-quality network cable that offers exceptional performance and reliability. With a lifetime limited warranty, you can trust that this cable will stand the test of time. It is TAA compliant, making it suitable for government and corporate use. The passive design ensures a stable and secure connection, while the 6.56 ft cable length provides flexibility in installation. With a data transfer rate of 100 Gbit/s, this cable delivers lightning-fast speeds for seamless data transmission. The QSFP28 network connectors on both ends make it easy to connect to your network devices. Made with copper, this cable ensures optimal signal transmission for uninterrupted connectivity. Upgrade your network with the ENET DAC Network Cable and experience superior performance and reliability.

In stock

Features & Benefits Provides PCIe interface Features a compact space-saving design Ideal for high-performance network applications Overview The Intel X550 Dual Port 10G Base-T Adapter, Full Height Ethernet is is validated and optimized on Intel® Xeon® processors and is backward Compatible with 1000BASE-T. It has an integrated MAC + 10GBASE-T PHYs, Single-Chip Solution and is designed for Multi-Core Processors: MSI/MSI-X and Direct Cache Access, Flow Director, up to 128 Tx/Rx physical queues per port. It is the best choice for virtualized servers, providing advanced features including Intel® Virtualization Technology for Connectivity (VT-c), Virtual Machine Device Queues (VMDq) and Single Root I/O Virtualization (SR-IOV) up to 64 VFs per port, NVGRE and VXLAN stateless offloads delivering amazing performance.

In stock

The C6PATCH5WH Cat 6 Patch Cable (5 ft) meets or exceeds all Category 6 cable specifications to ensure reliable Gigabit network connections, and features a durable white PVC jacket that enables you to color code your network cable runs as needed. To ensure long-lasting performance, this high quality Cat 6 patch cable features molded PVC strain relief that prevents the RJ45 connector termination points from bending at sharp angles - reducing the risk of cable damage, which could decrease network performance. Constructed of only top quality materials, this Gigabit Patch Cable delivers reliable performance and is backed by our Lifetime Warranty. 100% Copper - a better value StarTech.com Cat6 cables are manufactured using high-quality copper conductors. While many cable manufacturers offer a "cheaper" cable, based on a copper-coated aluminum core, we make no compromises on quality to ensure you receive top value and performance for your network cable investment. 24 AWG Wire This Cat6 cable is constructed with 24 gauge copper wire, to support a broad range of Ethernet applications such as Power over Ethernet (PoE). Because we use a high quality copper wire, our cables easily sustain the power required for Power over Ethernet applications, whereas the inferior quality offered by copper-coated aluminum cables may be subject to insufficient power delivery, heat buildup, equipment damage and potentially, fire. 50-micron Gold Connectors This molded patch cable offers high quality connectors comprised of 50-micron gold, to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion. More from the Manufacturer

In stock

Tripp Lite's U236-000-R USB 2.0 Ethernet Adapter allows your computer to instantly connect to a 10/100Mbps network through a USB port - no need to open up your computer case to add an internal Ethernet card. The adapter's compliance with USB 2.0 (480Mbps) ensures true 10/100 Mbps network speed without any compromise. Furthermore, the adapter is compact and is USB bus-powered; requires no external power adapter.

In stock

Upgrade your network with a CAT6 Snagless Networking Cable from Belkin and enjoy clean, clear transmissions. Now you can replace CAT5 cables that don't support 100Base-T or gigabit Ethernet and improve the return loss in your current network by 40 percent. Engineered with 50-micron gold-plated connectors to ensure clear transmissions, and snagless molds to protect the RJ45 tab from damage during installation, this Cable meets the performance requirements of Category 6.

In stock

Belkin manufactures the highest quality and largest selection of computer cables in the world. All Belkin cables carry an assurance of excellence obvious both inside and out. From our tough-but-flexible casings to our exclusive wiring configurations, Belkin cable technology guarantees peak performance and optimal data transmission. It's not surprising each also carries a Manufacturer's Lifetime Warranty.

In stock

RJ45 High-Performance Category 6 Snagless Patch Cable offers high bandwidth to accommodate streaming video and other data-intensive applications. Ideal for 100 Base-T and gigabit networks. Performance-tested to 100 MHz frequency. Cable provides the highest-performance network connection. Patch cable increases the quality of high-speed Internet applications, multiplayer gaming and streaming audio video. Ideal for demanding use and small/medium-size business.

In stock

Ultra-high-speed performance for high-density small businesses.Perfect for gaming, boutique hotels, tech start-ups and professional offices. The rise of the remote and hybrid workplace has placed increased pressure on business networks. Existing Wi-Fi infrastructure is struggling to support the explosion of devices and bandwidthhungry applications - all contributing to spotty video calls and sluggish download speeds. The Aruba Instant On AP25, a 4x4 Wi-Fi 6 access point, is designed to meet the increasing volume of connected devices. Delivering superior performance, coverage, and speed at a competitive price, the AP25 is the perfect access point for small and growing businesses. The Wi-Fi Certified 6TM AP25 delivers faster Wi-Fi speeds, greater capacity, and reduced latency between access points and devices for a superior Wi-Fi experience. AP25 improves efficiency and reduces congestion for networks with many connected devices, making it ideal for high-density environments. And with 4x the capacity of 802.11ac access points, the AP25 provides exceptional user experience, allowing businesses to serve more customers with higher speed and less congestion. Features of the AP25 include orthogonal frequency-division multiple access (OFDMA), multi-user MIMO and target wake time (TWT). With up to 4 spatial streams (4SS) and 160MHz channel bandwidth (HE160), the AP25 provides groundbreaking wireless capabilities for businesses looking to boost performance and future-proof their networks

In stock

Next Generation Layer 3 Stackable Smart Managed SwitchA new generation of Layer 3 stackable Smart Managed switches to aggregate your Gigabit network with 10G ports for uplink or stacking.High Availability and Flexibility 24 or 48 x 10/100/1000Base-T ports 20 or 44 x 10/100/1000Base-T PoE and 4 x 2.5GBase-T PoE ports 2 x 10GBase-T and 2 x SFP+ uplink ports High Bandwidth Stacking Physical Stacking of up to 8 units 2 x 10GBase-T and/or 2 x SFP+ 80 Gbps physical stacking bandwidth Advanced L2 features RSPAN Selective Q-in-Q Advanced L3 features IGMP v1/v2/v3 MLD v1/v2 PIM-SM/DM/SSM Static Route RIP/RIPng OSPF Reliability and Resiliency Ethernet Ring Protection Switching (ERPS) Virtual Router Redundancy Protocol (VRRP) Redundant Power Supply (RPS) support Management, Provisioning and Automation D-View 7 D-Link Network Assistant (DNA) Zero Touch Provisioning (ZTP)

In stock

The Belkin 900 Series Cat. 6 UTP Patch Cable is the ultimate solution for your networking needs. With a lifetime limited warranty, you can trust in the durability and longevity of this cable. Its strain relief feature ensures that it can withstand the rigors of everyday use without compromising performance. The PowerSum tested design guarantees reliable and consistent performance, making it perfect for both home and office use. Featuring a 2-row staggered pin configuration, this cable effectively controls cross-talk at hyper-frequency, ensuring a stable and interference-free connection. The internal load bar further enhances performance by accurately positioning pairs, resulting in consistent high-speed data transmission. In fact, this cable is capable of improving the return loss in your current network by an impressive 40%. Certified to meet EIA/TIA-568 Category 6 standards, this cable delivers high-quality networking capabilities. Whether you're streaming HD videos, gaming online, or transferring large files, this cable provides the speed and reliability you need. Its orange color adds a touch of style to your setup, while the snagless boot design makes installation a breeze. Upgrade your network with the Belkin 900 Series Cat. 6 UTP Patch Cable and experience the difference in performance and reliability. Trust in Belkin, a brand known for its commitment to quality and innovation. Take your networking to the next level with this exceptional cable. Order now and enjoy seamless connectivity for all your devices.

In stock

Belkin manufactures the highest quality and largest selection of computer cables in the world. All Belkin cables carry an assurance of excellence obvious both inside and out. From our tough-but-flexible casings to our exclusive wiring configurations, Belkin cable technology guarantees peak performance and optimal data transmission. It's not surprising each also carries a Manufacturer's Lifetime Warranty.

In stock

The latest member of Supermicro's network adapter family, the AOC-STGN-i2S is the most flexible and scalable Ethernet adapter for today's demanding data center environments. Based on the new Intel 10GbE network controller 82599ES, the AOC-STGN-i2S addresses the demanding needs of the next-generation data center by providing unmatched features for virtualization, flexibility for LAN and SAN networking, and proven reliable performance.

In stock

Belkin manufactures the highest quality and largest selection of computer cables in the world. All Belkin cables carry an assurance of excellence obvious both inside and out. From our tough-but-flexible casings to our exclusive wiring configurations, Belkin cable technology guarantees peak performance and optimal data transmission. It's not surprising each also carries a Manufacturer's Lifetime Warranty.

In stock

The Extreme Networks 25G Passive DAC SFP28 1m cable is the perfect solution for high-speed network connectivity. With its passive design, it provides reliable and efficient data transfer without the need for additional power. This cable is specifically designed for network devices, ensuring seamless compatibility and optimal performance. With a data transfer rate of 25 Gbit/s, this cable delivers lightning-fast speeds, allowing for quick and efficient data transmission. Whether you're transferring large files or streaming high-definition content, this cable ensures a smooth and uninterrupted connection. The SFP28 network connector on the first end ensures easy and secure connectivity to your network devices. Simply plug in the cable and experience seamless communication between your devices. Upgrade your network infrastructure with the Extreme Networks 25G Passive DAC SFP28 1m cable and enjoy reliable and high-speed connectivity. Whether you're a small business or a large enterprise, this cable is designed to meet your networking needs. Trust Extreme Networks, a leading manufacturer in the industry, to deliver top-quality products that enhance your network performance. Take your network to the next level with the Extreme Networks 25G Passive DAC SFP28 1m cable. Experience faster data transfer, seamless compatibility, and reliable performance. Upgrade today and unlock the full potential of your network.

In stock

The BROADCOM - IMSOURCING Dual-Port 10 Gb/s Ethernet PCI Express 3.0 x8 OCP 3.0 SFF Network Adapter is the perfect solution for businesses and individuals looking to enhance their network connectivity. With its versatile SFP+ Expansion Slot Type, you can easily connect to various devices and networks. The PCI Express 3.0 x8 Host Interface ensures high-speed data transfer, allowing for seamless and efficient communication. With two Total Number of Ports, you can expand your network connectivity and handle multiple connections simultaneously. The NetXtreme Product Line guarantees reliable and high-performance networking, ensuring smooth and uninterrupted data transmission. The 10Gigabit Ethernet Card provides ultra-fast network speeds, allowing for quick and efficient data transfer. The BCM957412N4120C Product Model ensures specific compatibility and functionality, making it a reliable choice for your networking needs. With 10GBase-X Network Technology, you can enjoy efficient and reliable data transmission. The Optical Fiber Media Type Supported enables long-distance connectivity, perfect for large-scale networks. The Plug-in Card Form Factor allows for easy installation and integration into your existing setup. Upgrade your network connectivity with the BROADCOM - IMSOURCING Dual-Port 10 Gb/s Ethernet PCI Express 3.0 x8 OCP 3.0 SFF Network Adapter and experience seamless and efficient networking like never before.

In stock

Axiom's family of network server adapters provide a wide-range of solutions to boost network performance and improve IT flexibility. Available band-widths range from 100Mbs to 100Gbs on interfaces ranging from 32-Bit PCI to PCIe 4.0 x16. Each adapter provides standard connector options from single port, dual port, quad ports in copper and/or fiber-based connections. Axiom network interface cards accelerate applications with enterprise-proven connectivity. These solutions are available for designated branded OEM systems. Each Axiom network adapter is 100-percent tested to ensure long-term reliability and performance in high transaction and mission-critical applications. Optimized for virtualization. Maximizes I/O consolidation with high performance ports. Leverages and protects existing IT investments. Delivers cost reductions in operating expense and total cost expense. Provide connectivity and scalability required for enterprise environments. Deliver enterprise-class connectivity. Supports both data and storage I/O with an adapter that can integrate with your existing Fibre Channel and Ethernet networks, extending the value of your network investments. Achieve convergence - Run concurrent TCP/IP and storage (iSCSI or Fibre Channel) traffic over a single link. Includes Full Height and Half Height Mounting Brackets

In stock

Axiom's family of network server adapters provide a wide-range of solutions to boost network performance and improve IT flexibility. Available band-widths range from 100Mbs to 100Gbs on interfaces ranging from 32-Bit PCI to PCIe 4.0 x16. Each adapter provides standard connector options from single port, dual port, quad ports in copper and/or fiber-based connections. Axiom network interface cards accelerate applications with enterprise-proven connectivity. These solutions are available for designated branded OEM systems. Each Axiom network adapter is 100-percent tested to ensure long-term reliability and performance in high transaction and mission-critical applications. Optimized for virtualization. Maximizes I/O consolidation with high performance ports. Leverages and protects existing IT investments. Delivers cost reductions in operating expense and total cost expense. Provide connectivity and scalability required for enterprise environments. Deliver enterprise-class connectivity. Supports both data and storage I/O with an adapter that can integrate with your existing Fibre Channel and Ethernet networks, extending the value of your network investments. Achieve convergence - Run concurrent TCP/IP and storage (iSCSI or Fibre Channel) traffic over a single link. Includes Full Height and Half Height Mounting Brackets

In stock

The Axiom PCIe 3.0 x8 10Gbs Fiber Network Adapter is a new generation of high-performance server adapter. Based on the Intel X710-BM2 controller, our server adapters address the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks and proven, reliable performance. The PCIe 3.0 x8 10Gbs Fiber Network Adapter delivers superior performance in a PCI Express v3.0 x8 slot. Key features include: Small Packet Performance: Achieves wire-rate throughput on smaller payload sizes (>64 Bytes for 10 GbE) Bulk Transfer Performance: Delivers line-rate performance with low CPU usage for large application buffers Network Virtualization: Network virtualization overlay offloads including Geneve, VXLAN, and NVGRE Storage Performance: Enables competitive performance with native OS drivers and intelligent offload for NAS (NFS, SMB), and SAN (iSCSI and FCoE) Includes Full Height and Half Height Mounting Brackets

In stock

This is a 10-Gigabit Ethernet PCIe 3.0 x8 network interface card with dual open SFP+ ports that comply with IEEE 802.3 standards. It is based on an Intel X710 chipset and is compatible with a variety of different applications and operating systems, including Windows, Linux and Unix-like systems. Providing 10Gbs of network speed, it fully supports high-end servers and various other networking applications. In addition, this card supports high level VLAN filtering. The dual open SFP+ ports allow users to choose from a range of SFP+ transceivers to accommodate multi-mode (MMF) and single-mode (SMF) fiber, granting customizable reach. This product includes both half-height and full-height brackets and supports Preboot Execution Environment booting (PXE Boot). Our network interface cards are 100% compliant, and offer a cost effective solution for all of your network upgrade needs. With our certification test program, we guarantee your product will work right the first time.

In stock

With the AOC-SGP-i4, Supermicro has extended the boundaries of Ethernet technology to create the most compact and feature-packed 4-port Ethernet controller in the market, and allow it to fit in the smallest space in the ever-densifying server system. With ultra-small footprint and rich of power management technology feature set, the AOC-SGP-i4 represents the next step in the Gigabit Ethernet networking evolution for enterprise and data center environments.

In stock

The HP 366M is a HP BladeSystem c-Class network adapter providing four Gigabit Ethernet ports on a single card saving valuable server mezzanine slots for other purposes. The x4 PCI Express 366M is supported on ProLiant c-Class servers in all mezzanine slots. For Gen8 ProLiant c-Class servers, the 366M is the first quad-port adapter option for c-Class with latest Intel® Ethernet I350 controller With the 366M, up to 96 Gigabit Ethernet ports per c7000 enclosure and 48 per c3000 enclosure are possible.

In stock

RJ45 High-Performance Category 6 Snagless Patch Cable offers high bandwidth to accommodate streaming video and other data-intensive applications. Ideal for 100 Base-T and gigabit networks. Performance-tested to 100 MHz frequency. Cable provides the highest-performance network connection. Patch cable increases the quality of high-speed Internet applications, multiplayer gaming and streaming audio video. Ideal for demanding use and small/medium-size business.

In stock

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network.100% Guaranteed Compatibility in all OEM applicationsPart number and unique product serialization; Eliminates any network communication conflicts and provides easy identificationFully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platformsOriginal Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only.

In stock

How does a Cat 6 patch cable affect your network? It's like when you replace one blocked pipe in your plumbing line and suddenly the flow increases, the transfer is more fluid and the whole system is improved. The RJ45 High Performance Category 6 UTP Patch Cable is the perfect performance upgrade. Used to replace any Cat 5 cable that fails to support 100 Base-T or Gigabit Ethernet. With RJ45 male-to-male connectors and a snagless molded strain relief.

In stock

How does a Cat 6 patch cable affect your network? It's like when you replace one blocked pipe in your plumbing line and suddenly the flow increases, the transfer is more fluid and the whole system is improved. The RJ45 High Performance Category 6 UTP Patch Cable is the perfect performance upgrade. Used to replace any Cat 5 cable that fails to support 100 Base-T or Gigabit Ethernet. With RJ45 male-to-male connectors and a snagless molded strain relief.

In stock

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network.100% Guaranteed Compatibility in all OEM applicationsPart number and unique product serialization; Eliminates any network communication conflicts and provides easy identificationFully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platformsOriginal Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only.

In stock

What is a Category 5e patch cable? Think of it as the street that links the house on your block and all the destinations in town. In actuality, it's a cable used to connect all the hardward destinations in a Local Area Network (LAN). The RJ45 Cat 5e patch is perfect for use with 10/100 Base-T networks.

In stock