وحدة توزيع الطاقة

البائع

السعر

RM

الحالة

428 products
  • Geist
    The Vertiv Geist Switched Rack PDU VP8941 is a 30A, 208V 0U vertical rack power distribution unit (PDU) with input power monitoring and outlet level switching. The VP8941 has 20 IEC C13 and 4 IEC C19 locking receptacles and a NEMA L6-30P plug providing 4.9kW of power capacity. This Switched rPDU allows you to turn off receptacles to avoid accidental overloads and power cycle equipment remotely to reboot unresponsive critical IT equipment. The hot-swappable Interchangeable Monitoring Device (IMD) displays current on the local LED display. It also supports Visible Light Communication (VLC) technology so you can view complete power usage data from a mobile device with the Vertiv rPDU Scanner application. The IMD includes ports for serial communication, environmental monitoring, and dual ethernet ports. Simplify management of multiple PDUs with fault-tolerant daisy chaining or IP aggregation capabilities. More from the Manufacturer

    متوفر في المخزون

    RM6,532.14

    RM9,168.57

    Save RM2,636.43
    أضف إلى العربة
  • Vertiv VP8941 Geist Switched Rack PDU 24-Outlets Data Center rPDU, 20 C13, 4 C19, L6-30P, 4900W [Discontinued] أضف إلى العربة
  • APC
    APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers.

    متوفر في المخزون

    RM2,644.88

    RM3,873.78

    Save RM1,228.9
    أضف إلى العربة
  • APC AP7821B Rack PDU, Metered, 1U, 16A, 208/230V, (8) C13, SNMP, Telnet, HTTP, SSH أضف إلى العربة
  • CyberPower
    The CyberPower PDU15B10R, a 10-outlet (rear) rackmount basic power distribution unit (PDU), provides 100 - 125 V 15A output. It distributes power to 10 NEMA 5-15R receptacles from a single NEMA 5-15P input with unfiltered electrical pass-through. Designed for datacenters and other electrically demanding applications, the PDU15B10R has rugged, industrial-grade metal housing and a 15-foot AC power cord. It can be mounted either horizontally or vertically, includes a cord retention tray, and is ETL/RoHS certified. A limited lifetime warranty covers defects in materials and workmanship in the product under normal use and conditions. Power Distribution Delivers AC power to servers, equipment, and connected devices via a power distribution unit.Switch-Free Design Safeguards against accidental power shutdown.Network-Grade Plugs and Outlets Highly durable construction ensures the efficient distribution of power in demanding IT or industrial environments to servers, equipment, and connected devices.Long Input Power Cord Reaches distant power sources, allowing the PDU to be placed where it's needed.Cord Retention Tray Secures power cords, keeping them organized and accessible. Helps cords stay plugged in.Configurable Mounting Brackets Allow for installation of the PDU in the following configurations: 0U (vertical, under counter, and wall mount), 1U (horizontal, vertical, under counter, and wall mount), and 2U (horizontal and wall mount).Durable Metal Housing Protects internal components and resists damage from impact or abrasions within challenging industrial environments. Also extends the life of the product.Limited Lifetime Warranty Covers defects in materials and workmanship in the product under normal use and conditions. See warranty for details. What's In The Box PDU, Cord Retention Tray, User Manual, Screw Kit, Cord Clip Kit, Horizontal Mounting Brackets, Vertical Mounting Brackets, Product Registration Card

    متوفر في المخزون

    RM465.29

    RM547.48

    Save RM82.19
    أضف إلى العربة
  • CyberPower PDU15B10R 10-Outlets PDU, 100-125VAC 15A Basic Power Distribution Unit أضف إلى العربة
  • APC
    The Schneider Electric Basic Rack Power Distribution Unit (PDU) distributes power to devices in the rack.

    متوفر في المخزون

    RM1,200.81

    RM1,729.1

    Save RM528.29
    أضف إلى العربة
  • APC AP6002A Basic 16-Outlet PDU, 30A, 230V AC, RoHS Certified أضف إلى العربة
  • Eaton
    The Eaton EPDU MI 1U is a high-performance power distribution unit that ensures reliable and efficient power delivery for your critical equipment. With an input current of 24 A and an input voltage of 230 V AC, this PDU provides the power you need to keep your devices running smoothly. The 16 x IEC 60320 C13 outlets allow you to connect multiple devices, while the NEMA L6-30P plug connector ensures a secure and stable connection. With a power rating of 5760 W, this PDU can handle even the most demanding power requirements. Its compact 1U rack height and horizontal mounting orientation make it easy to install and integrate into your existing setup. The built-in network interface allows for remote monitoring and management, giving you full control over your power distribution. Backed by a 3-year limited warranty, the Eaton EPDU MI 1U is a reliable and durable solution for all your power distribution needs. Upgrade your power infrastructure with the Eaton EPDU MI 1U and experience enhanced performance and efficiency.

    متوفر في المخزون

    RM4,841.83

    RM6,178.73

    Save RM1,336.9
    أضف إلى العربة
  • Eaton EMIT05-10 ePDU Metered 16-Outlet PDU, 24A, 230V AC, 5760W أضف إلى العربة
  • CyberPower
    The CyberPower PDU15MV20F, a 20-outlet (front), 0U vertical rackmount metered power distribution unit (PDU), provides 100 - 125 V 15A output. It distributes power to 20 NEMA 5-15R receptacles from a single NEMA 5-15P plug with unfiltered electrical pass-through. The current draw for connected equipment is displayed in amps on the front LCD for real-time load monitoring. Designed for datacenters and other electrically demanding applications, the PDU15MV20F has rugged, industrial-grade metal housing, and a 10-foot AC power cord. It supports vertical, horizontal, and wall mount installation. The PDU15MV20F comes with a cord retention tray and is ETL/RoHS certified. A limited lifetime warranty covers defects in materials and workmanship in the product under normal use and conditions. Power Distribution Delivers AC power to servers, equipment, and connected devices via a power distribution unit.Switch-Free Design Safeguards against accidental power shutdown.Network-Grade Plugs and Outlets Highly durable construction ensures the efficient distribution of power in demanding IT or industrial environments to servers, equipment, and connected devices.Long Input Power Cord Reaches distant power sources, allowing the PDU to be placed where it's needed.Cord Retention Tray Secures power cords, keeping them organized and accessible. Helps cords stay plugged in.Configurable Mounting Brackets Allow for installation of the PDU in the following configurations: 0U (vertical, under counter, and wall mount), 1U (horizontal, vertical, under counter, and wall mount), and 2U (horizontal and wall mount).Durable Metal Housing Protects internal components and resists damage from impact or abrasions within challenging industrial environments. Also extends the life of the product.Limited Lifetime Warranty Covers defects in materials and workmanship in the product under normal use and conditions. See warranty for details. What's In The Box PDU, Cord Retention Tray, User Manual, Screw Kit, Cord Clip Kit, Horizontal Mounting Brackets, Vertical Mounting Brackets, Product Registration Card

    متوفر في المخزون

    RM810.85

    RM911.35

    Save RM100.51
    أضف إلى العربة
  • CyberPower PDU15MV20F 20-Outlets PDU, 100-125VAC 15A Metered Power Distribution Unit أضف إلى العربة
  • CyberPower
    The CyberPower PDU20BHVT8R Basic PDU is the perfect solution for efficient and reliable power distribution. With 8 outlets, this PDU provides ample power for all your devices and equipment. Its input voltage range of 200V AC to 230V AC ensures compatibility with a wide range of power sources. The PDU offers multiple output voltage options, including 200V DC, 208V AC, and 230V AC, allowing you to choose the right voltage for your specific needs. Safety is a top priority with the CyberPower PDU20BHVT8R. It features overload protection, safeguarding your devices from power surges and potential damage. The PDU is equipped with a variety of receptacle types, including IEC 60320 C13 and IEC 60320 C19, ensuring compatibility with different types of power cords. Installation is a breeze with the NEMA L6-20P plug/connector type, making it easy to connect the PDU to your power source. The rack-mountable design with a 1U rack height allows for seamless integration into your existing setup. The PDU also comes with a cord retention tray, keeping your cables organized and tangle-free. Not only is the CyberPower PDU20BHVT8R a reliable and efficient power distribution unit, but it is also environmentally friendly with RoHS certification. It meets strict environmental standards, making it a sustainable choice for your power needs. With a lifetime limited warranty, you can have peace of mind knowing that your investment is protected. Choose the CyberPower PDU20BHVT8R Basic PDU for reliable power distribution and peace of mind.

    متوفر في المخزون

    RM573.29

    RM724.05

    Save RM150.76
    أضف إلى العربة
  • CyberPower PDU20BHVT8R Basic PDU, 8-Outlets, 200-230V, 20A, Rack-mountable أضف إلى العربة
  • Tripp Lite
    The Tripp Lite PDUB201U 6-Outlets PDU is the perfect solution for efficient and reliable power distribution. With 6 outlets, this PDU allows you to conveniently connect multiple devices and distribute power effectively. It features an input voltage of 120V AC, ensuring compatibility with standard power sources. The PDUB201U offers versatile power delivery options with output voltage choices of 127V AC, 120V AC, and 100V AC. With a power rating of 2030W, this PDU can handle high-power devices with ease. Designed for efficiency, the PDUB201U is a single-phase PDU that ensures optimal power distribution. Its manual bypass PDU type allows for easy operation and flexibility. The 6 NEMA 5-20R receptacles provide a secure and reliable connection for a variety of devices. Additionally, the 2 NEMA 5-20P plug/connectors offer flexible power input options. The PDUB201U is not only functional but also versatile in terms of installation. It can be easily mounted on a rack or wall, providing flexibility in placement. Its hot-swappable form factor allows for convenient maintenance, ensuring minimal downtime. Experience the convenience and reliability of the Tripp Lite PDUB201U 6-Outlets PDU. Whether you need to power multiple devices in your office or home, this PDU is the ideal solution. Trust in Tripp Lite's reputation for quality and performance. Upgrade your power distribution system with the PDUB201U and enjoy efficient and reliable power delivery.

    متوفر في المخزون

    RM1,036.34

    RM1,468.7

    Save RM432.35
    أضف إلى العربة
  • Tripp Lite PDUB201U 6-Outlets PDU, 20A, 120V AC, 2030W, Rack-mountable أضف إلى العربة
  • APC
    The APC Metered-by-Outlet Rack PDU (AP8659NA3) is the perfect power distribution unit for your server rack. With its metered-by-outlet design, you can easily monitor and manage the power consumption of each individual device connected to the PDU. It features a total of 24 receptacles, including 3 IEC 60320 C19 and 21 IEC 60320 C13, providing you with ample power outlets for your equipment. With an input voltage range of 200 V AC - 230 V AC and an output voltage of 208 V AC, this rack PDU ensures stable and reliable power delivery to your devices. The NEMA L6-20P plug/connector type makes installation a breeze, allowing you to quickly set up your power distribution system. Managing the APC Metered-by-Outlet Rack PDU is simple and convenient. It supports web, SNMP, and Telnet protocols, giving you multiple options for monitoring and controlling your power distribution. You can easily access and manage the PDU remotely, ensuring that your devices are always powered and protected. Not only is the APC Metered-by-Outlet Rack PDU a powerful and reliable solution, but it is also environmentally friendly. It is certified with RoHS and REACH, ensuring that it meets strict environmental standards. By choosing this PDU, you are making a sustainable choice for your power distribution needs. The rack-mountable design of this PDU allows for easy installation in server racks, saving valuable space in your data center. It weighs approximately 14.90 lb, making it lightweight and compact, perfect for any server rack setup. Upgrade your power distribution system with the APC Metered-by-Outlet Rack PDU. Experience the convenience of individual outlet metering, reliable power delivery, and easy management. Choose a sustainable solution that meets your power distribution needs.

    متوفر في المخزون

    RM7,617.78

    RM11,194.84

    Save RM3,577.07
    أضف إلى العربة
  • APC AP8659NA3 Metered-by-Outlet Rack PDU, 230V AC Input, 208V AC Output أضف إلى العربة
  • CyberPower
    The CyberPower PDU41004 Single Phase 100 - 240 VAC 15A Switched PDU is a reliable and versatile power distribution unit that is perfect for managing your electrical devices. With 8 outlets featuring IEC 60320 C13 receptacles, this PDU provides ample power for your equipment. The IEC 60320 C14 plug/connector ensures a secure and efficient connection. Take control of your power management with the remote management capabilities of this PDU. It supports various protocols such as IPv4, TCP/IP, UDP, SNMPv1, HTTP, NTP, DNS, Telnet, DHCP, SMTP, FTP, IPv6, SNMPv3, HTTPs, SSH, SSL, TLS, LDAP(S), RADIUS, Syslog, CLI, and Windows AD, allowing you to monitor and control your devices from anywhere. The LCD screen provides real-time information on voltage, frequency, load, current, HW/FW version, and network details, while the LED indicators give you a quick visual status update. With updateable firmware via USB or Ethernet, you can easily keep your PDU up to date with the latest features and enhancements. The modular expandability allows for cascading via RJ45, providing flexibility for future expansion. You can also switch outlets remotely, giving you full control over your power distribution. The CyberPower PDU41004 is not only powerful but also environmentally friendly. It is RoHS certified and meets CE, FCC Class A, UL60950, and EN 55032 Class A standards. Experience the convenience and reliability of the CyberPower PDU41004 Single Phase 100 - 240 VAC 15A Switched PDU. Take charge of your power management and ensure the smooth operation of your devices.

    متوفر في المخزون

    RM2,350.4

    RM2,752.42

    Save RM402.02
    أضف إلى العربة
  • CyberPower PDU41004 8-Outlet PDU, Single Phase 100-240VAC 15A Switched PDU أضف إلى العربة
  • Tripp Lite
    The PDUMNH30HVAT 5.8kW Single-Phase 208/240V ATS/Monitored PDU provides remote power monitoring and enables redundant power for network devices with non-redundant power supply configurations. Ideal for data centers and server rooms, it mounts in 1U of space in EIA-standard 19-inch racks and features one L6-30R outlet-perfect for connecting a single device or a 0U 208/240V PDU with an L6-30P plug. Dual 10-foot input cords with L6-30P plugs connect to separate primary and secondary single-phase power sources. The PDU constantly evaluates the power quality of both input sources. Dynamic solid-state (TRIAC) automatic transfer switching allows the PDU to switch to the secondary source within 1-5 milliseconds should the primary source fail or become unstable to ensure your connected equipment operates without interruption. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Automated alerts help prevent accidental overloads, power loss and downtime. Digital display indicates power availability, voltage, source A/B input status, output load and power factor, as well as temperature and humidity conditions with the optional ENVIROSENSE module (sold separately).

    متوفر في المخزون

    RM4,490.52

    RM7,261.44

    Save RM2,770.92
    أضف إلى العربة
  • Tripp Lite PDUMNH30HVAT 5.8kW Single-Phase 208/240V ATS/Monitored PDU, Rack-Mountable, 1U أضف إلى العربة
  • ATEN
    The PE6208 eco PDU is intelligent PDUs that contains 8 AC outlets and is available in various IEC or NEMA socket configurations. It provides secure, centralized, intelligent, power management (power on, off, cycle) of data center IT equipment (servers, storage systems, KVM switches, network devices, serial data devices, etc.), as well as the ability to monitor the center's health environment via sensors*.

    متوفر في المخزون

    RM2,119.06
    أضف إلى العربة
  • ATEN PE6208A eco PDU 8-Outlets Power Distribution Unit, TAA Compliant أضف إلى العربة
    RM2,119.06
    ATEN PE6208A eco PDU 8-Outlets Power Distribution Unit, TAA Compliant متوفر في المخزون أضف إلى العربة
  • Tripp Lite
    The PDU40TDUAL 3.8kW Single-Phase Dual-Circuit 120V Basic PDU works as two independent PDUs in a single housing, perfect for networking, telecom, security, audio/video and sound reinforcement applications. Ideal for high-density network equipment with dual redundant input cables, it features 40 NEMA 5-15/20R outlets split evenly into two separate power circuits. Each power circuit, including its input plug, power cord, breaker and outlets, is color-coded black or gray for easy identification. Both 10-foot power cords feature NEMA L5-20P input plugs and come with optional adapters to convert them to NEMA 5-20P plugs, which are not color-coded. Connect the plugs to separate mains input power sources, generators or protected UPS systems to distribute AC power to connected equipment.The switchless design prevents an accidental shutdown, which could lead to costly downtime. Dual 20A circuit breakers protect connected equipment from dangerous overloads. The 70-inch all-metal housing supports toolless 0U vertical mounting in EIA-standard 19-inch racks, as well as on a wall or workbench or under a counter with user-supplied hardware.

    متوفر في المخزون

    RM1,329.36

    RM2,062.59

    Save RM733.23
    أضف إلى العربة
  • Tripp Lite PDU40TDUAL PDU Basic DUAL 20A 40 Outlet, 120V AC, 3800W, Rack-mountable أضف إلى العربة
  • CyberPower
    The CyberPower PDU15M2F8R, a 10-outlet (2 front, 8 rear), rackmount metered power distribution unit (PDU), provides 100 - 125 V 15A output. It distributes power to 10 NEMA 5-15R receptacles from a single NEMA 5-15P input with unfiltered electrical pass-through. The current draw for connected equipment is displayed in amps on the front LCD for real-time load monitoring. Designed for datacenters and other electrically demanding applications, the PDU15M2F8R has rugged, industrial-grade metal housing and a 15-foot AC power cord. It can be mounted either horizontally or vertically. The PDU15M2F8R comes with a cord retention tray and is ETL/RoHS certified. A limited lifetime warranty covers defects in materials and workmanship in the product under normal use and conditions. Power Distribution Delivers AC power to servers, equipment, and connected devices via a power distribution unit.Switch-Free Design Safeguards against accidental power shutdown.Network-Grade Plugs and Outlets Highly durable construction ensures the efficient distribution of power in demanding IT or industrial environments to servers, equipment, and connected devices.Long Input Power Cord Reaches distant power sources, allowing the PDU to be placed where it's needed.Twist Lock Plug Secures an outlet by twisting and locking into place to prevent accidental disconnection.Cord Retention Tray Secures power cords, keeping them organized and accessible. Helps cords stay plugged in.Configurable Mounting Brackets Allow for installation of the PDU in the following configurations: 0U (vertical, under counter, and wall mount), 1U (horizontal, vertical, under counter, and wall mount), and 2U (horizontal and wall mount).Durable Metal Housing Protects internal components and resists damage from impact or abrasions within challenging industrial environments. Also extends the life of the product.Limited Lifetime Warranty Covers defects in materials and workmanship in the product under normal use and conditions. See warranty for details. What's In The Box PDU, Cord Retention Tray, User Manual, Screw Kit, Cord Clip Kit, Horizontal Mounting Brackets, Vertical Mounting Brackets, Product Registration Card

    متوفر في المخزون

    RM634.32

    RM753.74

    Save RM119.42
    أضف إلى العربة
  • CyberPower PDU15M2F8R Metered PDU, 10-Outlets, Single Phase 15A, 100-125V AC أضف إلى العربة
  • APC
    APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency. More from the Manufacturer

    متوفر في المخزون

    RM3,839.7

    RM5,623.03

    Save RM1,783.32
    أضف إلى العربة
  • APC AP8861 Metered Rack PDU, 44-Outlets 5.7kW, SNMP, Telnet, 2 Year Warranty أضف إلى العربة
  • Tripp Lite
    Tripp Lite 3 phase Metered PDU / Power Distribution Units offer real-time local reporting of current levels in amps via set of 3 built-in digital meters. Enables visual monitoring of PDU current levels to preserve proper loading balance and prevent circuit overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.

    متوفر في المخزون

    RM2,269.81

    RM3,617.5

    Save RM1,347.68
    أضف إلى العربة
  • Tripp Lite PDU3MV6L2120 3-Phase Metered PDU, 5700W, 230V AC Input, 208V AC/120V AC Output أضف إلى العربة
  • CyberPower
    The CyberPower PDU30BVHVT32F, a 32-outlet (front) 0U vertical rackmount basic power distribution unit (PDU), provides 200/230V 30A output. It distributes power to 24 IEC-320 C13, 8 IEC-320 C19 receptacles from a single NEMA L6-30P twist lock plug with unfiltered electrical pass-through. Designed for datacenters and other electrically demanding applications, the PDU30BVHVT32F has rugged, industrial-grade metal housing and a 10-foot AC power cord. It supports vertical, horizontal, and wall mount installation. The PDU30BVHVT32F comes with a cord retention tray and is ETL/RoHS certified. A limited lifetime warranty covers defects in materials and workmanship in the product under normal use and conditions. Power Distribution Delivers AC power to servers, equipment, and connected devices via a power distribution unit.Switch-Free Design Safeguards against accidental power shutdown.Network-Grade Plugs and Outlets Highly durable construction ensures the efficient distribution of power in demanding IT or industrial environments to servers, equipment, and connected devices.Long Input Power Cord Reaches distant power sources, allowing the PDU to be placed where it's needed.Twist Lock Plug Secures an outlet by twisting and locking into place to prevent accidental disconnection.Cord Retention Tray Secures power cords, keeping them organized and accessible. Helps cords stay plugged in.Configurable Mounting Brackets Allow for installation of the PDU in the following configurations: 0U (vertical, under counter, and wall mount), 1U (horizontal, vertical, under counter, and wall mount), and 2U (horizontal and wall mount).Durable Metal Housing Protects internal components and resists damage from impact or abrasions within challenging industrial environments. Also extends the life of the product.Limited Lifetime Warranty Covers defects in materials and workmanship in the product under normal use and conditions. See warranty for details. What's In The Box PDU, Cord Retention Tray, User Manual, Screw Kit, Cord Clip Kit, Horizontal Mounting Brackets, Vertical Mounting Brackets, Product Registration Card

    متوفر في المخزون

    RM1,505.25

    RM1,815.9

    Save RM310.65
    أضف إلى العربة
  • CyberPower PDU30BVHVT32F 32-Outlets PDU, 200-230VAC 30A Basic Power Distribution Unit أضف إلى العربة
  • CyberPower
    Streamline capacity planning and power management with the CyberPower PDU81105 switched metered-by-outlet PDU. Ideal for data centers and network closets, this unit provides outlet-level power monitoring in real time, along with individual outlet control for remote reboots, load shedding, controlled power-cycling and more. The PDU81105 supports inputs between 200-240V and includes 21 C13 and 3 C19 outlets. Other features include a rack mount design (0U), built-in web interface (RJ-45 ethernet connection), interactive digital display and power event notifications. The CyberPower PDU81105 is protected by a three-year limited warranty. Power DistributionDelivers AC power to servers, equipment, and connected devices via a power distribution unit. Switch-Free DesignSafeguards against accidental power shut down. Switchable OutletsProvides local and remote control for individual and multiple outlets. Local control: turn on/turn off outlets and disable unused outlets. Remote control: restart outlets and devices, turn on/turn off, schedule power on/off sequencing, and disable unused outlets. Per Outlet Power MeteringProvides information on the amount of power being drawn from each outlet, each circuit and the PDU as a whole. CyberPower Management ConsoleA hardware interface built into Monitored and Switched PDUs. Its functionality includes the ability to switch PDU outlets on and off, reboot connected equipment locally or remotely, schedule power cycling of attached equipment, and perform other tasks, such as load monitoring and event logging Remote and Local MonitoringEnables offsite and onsite tracking of PDU vitals; provides outlet control for individual and networked clients. Automatic Event NotificationsProvide immediate updates about power events via email, SMS text, or SNMP traps. Upgradeable FirmwareDownloadable improvements (firmware updates) to programs that run the PDU. Digital DisplayProvides easy-to-read information about amperage, voltage, KW, IP address, and other PDU information. Network-Grade Plugs and OutletsHighly durable construction ensures the efficient distribution of power in demanding IT or industrial environments to servers, equipment, and connected devices. Long Input Power CordReaches distant power sources, allowing the PDU to be placed where it's needed. Cord Retention TraySecures power cords, keeping them organized and accessible. Helps cords stay plugged in. Durable Metal HousingProtects internal components and resists damage from impact or abrasions within challenging industrial environments. Also extends the life of the product. Three-Year Limited WarrantyCovers defects in materials and workmanship in the product under normal use and conditions within three years of the purchase date. See warranty for details. What's In The Box PDU, 2 Mounting Brackets, 6 M4x5 Screws, 6 M5x12 Screws/Washers, 6 M3x6 screws, Cord Retention Tray, Cable Ties, RJ45/DB9 Cable, User's Manual Registration and Download Cards

    متوفر في المخزون

    RM6,425.42

    RM6,959.93

    Save RM534.5
    أضف إلى العربة
  • CyberPower PDU81105 24-Outlet PDU, Switched with Metered-by-Outlet, 30A 208V, 10ft Cord, 0U 3yr Wty أضف إلى العربة
  • Tripp Lite
    C20 to C19 Power Cable for Network Devices That Require a Heavy-Gauge Connection This rugged cord features 12 AWG wire suitable for high power connections, making it a reliable solution for large server applications that require a higher-rated, heavier-gauge cable. It can be used to connect a server, router, switch, blade server enclosure or other network device to a UPS system or PDU. It is also an ideal replacement or upgrade from the standard power cord provided by the device's manufacturer. The six-foot length allows you flexibility in placing equipment with respect to the power outlet. Locking C19 Connector Helps Prevent Accidental Disconnection and Expensive Downtime Having a cable come loose accidentally can mean the loss of power and costly downtime. The locking C19 connector helps you avoid such danger, protecting critical equipment by maintaining a secure link without failure. The locking cable is also invaluable when moving equipment in a rack or removing equipment from tight areas, ensuring the power cord always stays connected. Lifetime Warranty The P036-L06 is backed by a lifetime warranty, ensuring reliability and performance.

    متوفر في المخزون

    RM154.64

    RM244.36

    Save RM89.72
    أضف إلى العربة
  • Tripp Lite P036-L06 Standard Power Cord, 6 ft, 20A, 250V AC, Black أضف إلى العربة
  • Tripp Lite
    Tripp Lite single phase Metered PDU / Power Distribution Units offer real-time local reporting of load level in amps via built-in digital display. Enables visual monitoring of PDU load levels to prevent overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.

    متوفر في المخزون

    RM675.44

    RM1,002.72

    Save RM327.28
    أضف إلى العربة
  • Tripp Lite PDUMV15-36 14-Outlets PDU, 120V AC, 15A, 1500W, Rack-mountable أضف إلى العربة
  • Black Box
    Provide power and protection directly to your rackmounted equipment with our 15-amp vertically mounted power strip. Features 24 15-amp outlets. Compact size makes it an easy fit for most cabinets. A 15-amp circuit breaker and surge protector provide protection against voltage spikes and current overdraw. Features an integral 6-foot (1.8-m) cord with molded plugs.

    متوفر في المخزون

    RM874.8
    أضف إلى العربة
  • Black Box PDUBV24-S15-120V Vertical PDU - 15-Amp Single Circuit, 120V, 24-Outlet, 5-15R, 5-15P, Compact Design, Surge Protection أضف إلى العربة
  • CyberPower
    Streamline capacity planning and power management with the CyberPower PDU81102 switched metered-by-outlet PDU. Ideal for data centers and network closets, this unit provides outlet-level power monitoring in real time, along with individual outlet control for remote reboots, load shedding, controlled power-cycling and more. The PDU81102 supports inputs between 100-120V and includes 24 NEMA 5-20R outlets. Other features include a rack mount design (0U), built-in web interface (RJ-45 ethernet connection), interactive digital display and power event notifications. The CyberPower PDU81102 is protected by a three-year limited warranty. Power DistributionDelivers AC power to servers, equipment, and connected devices via a power distribution unit. Switch-Free DesignSafeguards against accidental power shut down. Switchable OutletsProvides local and remote control for individual and multiple outlets. Local control: turn on/turn off outlets and disable unused outlets. Remote control: restart outlets and devices, turn on/turn off, schedule power on/off sequencing, and disable unused outlets. Per Outlet Power MeteringProvides information on the amount of power being drawn from each outlet, each circuit and the PDU as a whole. CyberPower Management ConsoleA hardware interface built into Monitored and Switched PDUs. Its functionality includes the ability to switch PDU outlets on and off, reboot connected equipment locally or remotely, schedule power cycling of attached equipment, and perform other tasks, such as load monitoring and event logging Remote and Local MonitoringEnables offsite and onsite tracking of PDU vitals; provides outlet control for individual and networked clients. Automatic Event NotificationsProvide immediate updates about power events via email, SMS text, or SNMP traps. Upgradeable FirmwareDownloadable improvements (firmware updates) to programs that run the PDU. Digital DisplayProvides easy-to-read information about amperage, voltage, KW, IP address, and other PDU information. Network-Grade Plugs and OutletsHighly durable construction ensures the efficient distribution of power in demanding IT or industrial environments to servers, equipment, and connected devices. Long Input Power CordReaches distant power sources, allowing the PDU to be placed where it's needed. Cord Retention TraySecures power cords, keeping them organized and accessible. Helps cords stay plugged in. Durable Metal HousingProtects internal components and resists damage from impact or abrasions within challenging industrial environments. Also extends the life of the product. Three-Year Limited WarrantyCovers defects in materials and workmanship in the product under normal use and conditions within three years of the purchase date. See warranty for details. What's In The Box PDU, 2 Mounting Brackets, 6 M4x5 Screws, 6 M5x12 Screws/Washers, 6 M3x6 screws, Cord Retention Tray, Cable Ties, RJ45/DB9 Cable, User's Manual Registration and Download Cards

    متوفر في المخزون

    RM6,050.81

    RM6,385.4

    Save RM334.59
    أضف إلى العربة
  • CyberPower PDU81102 24-Outlet PDU, 100-120V, 30A, Switched Metered-by-Outlet أضف إلى العربة
  • Tripp Lite
    Bypass PDU Recommended for Maintaining Continuous Power During UPS MaintenanceKeeping mission-critical data center equipment operating at its optimal level often means scheduled maintenance. But what if you are unable to afford the costly downtime involved in powering down for regular upkeep? This 200-250V 16A single-phase hot-swap PDU works in conjunction with your UPS system to keep everything running 24/7/365. It allows you to manually transfer connected equipment to utility power via the PDU's bypass switch, permitting maintenance or equipment replacement with no interruption of performance. Features Dual Inputs and a Manual Transfer Switch for Uninterrupted OperationThe PDUBHV201U features two C20 inlets that connect to separate UPS and utility input power sources with user-supplied power cables or the included C19-to-C20 cables. The manual transfer switch allows PDU output power to flow from either input. Flip the switch to Bypass to replace the UPS and flip back to Normal once the maintenance or UPS replacement is complete. Equipment connected to the outlets will continue to operate without interruption. Optional ECO Switching Feature Enables Cost-Cutting Power SavingsBy enabling the ECO power saving feature, you can power off a single bank of four controlled C13 outlets all at once when the devices connected to the master C13 and C19 outlets are powered off or go into a low-power consumption mode. Mounts into 1U of Rack Space or on a WallUse the included mounting hardware to install the PDUBHV201U's all-metal housing into 1U of space in an EIA-standard 19-inch rack. You may also use the mounting brackets to secure the PDU to a wall.

    متوفر في المخزون

    RM616.05
    أضف إلى العربة
  • Tripp Lite PDUBHV201U 6-Outlets PDU, 230V AC, 16A, 3800W, Wall/Rack-Mountable أضف إلى العربة
    RM616.05
    Tripp Lite PDUBHV201U 6-Outlets PDU, 230V AC, 16A, 3800W, Wall/Rack-Mountable متوفر في المخزون أضف إلى العربة
  • CyberPower
    The CyberPower PDU20M2F8R, a 10-outlet (2 front, 8 rear), rackmount metered power distribution unit (PDU), provides 100 - 125 V 20A output. It distributes power to 10 NEMA 5-20R receptacles from a single NEMA 5-20P input with unfiltered electrical pass-through. The current draw for connected equipment is displayed in amps on the front LCD for real-time load monitoring. Designed for datacenters and other electrically demanding applications, the PDU20M2F8R has rugged, industrial-grade metal housing and a 15-foot AC power cord. It can be mounted either horizontally or vertically. The PDU20M2F8R comes with a cord retention tray and is ETL/RoHS certified. A limited lifetime warranty covers defects in materials and workmanship in the product under normal use and conditions. Power Distribution Delivers AC power to servers, equipment, and connected devices via a power distribution unit.Switch-Free Design Safeguards against accidental power shutdown.Network-Grade Plugs and Outlets Highly durable construction ensures the efficient distribution of power in demanding IT or industrial environments to servers, equipment, and connected devices.Long Input Power Cord Reaches distant power sources, allowing the PDU to be placed where it's needed.Cord Retention Tray Secures power cords, keeping them organized and accessible. Helps cords stay plugged in.Configurable Mounting Brackets Allow for installation of the PDU in the following configurations: 0U (vertical, under counter, and wall mount), 1U (horizontal, vertical, under counter, and wall mount), and 2U (horizontal and wall mount).Durable Metal Housing Protects internal components and resists damage from impact or abrasions within challenging industrial environments. Also extends the life of the product.Limited Lifetime Warranty Covers defects in materials and workmanship in the product under normal use and conditions. See warranty for details. What's In The Box PDU, Cord Retention Tray, User Manual, Screw Kit, Cord Clip Kit, Horizontal Mounting Brackets, Vertical Mounting Brackets, Product Registration Card

    متوفر في المخزون

    RM801.71

    RM890.15

    Save RM88.44
    أضف إلى العربة
  • CyberPower PDU20M2F8R Metered PDU, 10-Outlets, 20A, 120V AC, Rack-mountable أضف إلى العربة
  • CyberPower
    Ensure continued operation of critical devices with the CyberPower PDU44003 Switched ATS PDU. Ideal for data centers and network closets, this unit provides power redundancy to single-corded connected equipment. If power for the primary source exceeds the lower or upper thresholds, or if power fails, the PDU will switch to the secondary power source to ensure continuous operation. The PDU will switch back to the primary power source when incoming power becomes stable. Additionally, this unit offers real time remote and local monitoring and outlet management.The PDU44003 supports inputs between 100-120V and includes (16) NEMA 5-20R and (1) L5-30R outlets. Dual NEMA L5-30P power cords are plugged into separate power sources (A and B), and information about each power source is clearly displayed on the front panel LED indicator lights. Other features include an LCD with selectable background color, built-in web interface, and power event notifications. The CyberPower PDU44003 is protected by a three-year limited warranty

    متوفر في المخزون

    RM4,111.34

    RM4,566.08

    Save RM454.74
    أضف إلى العربة
  • CyberPower PDU44003 Metered ATS PDU 17-Outlets PDU, 30A, 120V AC, Single Phase, Rack-mountable أضف إلى العربة
  • CyberPower
    The CyberPower PDU20M2F12R, a 14-outlet (2 front, 12 rear), rackmount metered power distribution unit (PUD), provides 100 - 125 V 20A output. It distributes power to 14 NEMA 5-20R receptacles from a single NEMA 5-20P input with unfiltered electrical pass-through. The current draw for connected equipment is displayed in amps on the front LCD for real-time load monitoring. Designed for datacenters and other electrically demanding applications, the PDU20M2F12R has rugged, industrial-grade metal housing and a 15-foot AC power cord. It can be mounted either horizontally or vertically. The PDU20M2F12R comes with a cord retention tray and is ETL/RoHS certified. A limited lifetime warranty covers defects in materials and workmanship in the product under normal use and conditions. Power Distribution Delivers AC power to servers, equipment, and connected devices via a power distribution unit.Switch-Free Design Safeguards against accidental power shutdown.Network-Grade Plugs and Outlets Highly durable construction ensures the efficient distribution of power in demanding IT or industrial environments to servers, equipment, and connected devices.Long Input Power Cord Reaches distant power sources, allowing the PDU to be placed where it's needed.Cord Retention Tray Secures power cords, keeping them organized and accessible. Helps cords stay plugged in.Configurable Mounting Brackets Allow for installation of the PDU in the following configurations: 0U (vertical, under counter, and wall mount), 1U (horizontal, vertical, under counter, and wall mount), and 2U (horizontal and wall mount).Durable Metal Housing Protects internal components and resists damage from impact or abrasions within challenging industrial environments. Also extends the life of the product.Limited Lifetime Warranty Covers defects in materials and workmanship in the product under normal use and conditions. See warranty for details. What's In The Box PDU, Cord Retention Tray, User Manual, Screw Kit, Cord Clip Kit, Horizontal Mounting Brackets, Vertical Mounting Brackets, Product Registration Card

    متوفر في المخزون

    RM701.21

    RM1,052.97

    Save RM351.77
    أضف إلى العربة
  • CyberPower PDU20M2F12R Metered PDU, 14-Outlets, 20A, 100-125V AC أضف إلى العربة
  • CyberPower
    The CyberPower Basic PDU20BHVIEC8R 8-Outlets PDU provides 208V/230V 20A output. It distributes power to 8 IEC receptacles from a single IEC 60320 C20 plug, with unfiltered electrical pass-through. Designed for datacenters and other electrically demanding applications, this unit has a rugged, industrial-grade metal housing and a 10-foot AC power cord. It can be mounted either horizontally or vertically, includes a cord retention tray and is ETL/RoHS certified. A lifetime warranty ensures that this PDU is free of defects in design, assembly, material or workmanship. 8 ICE-320 C13 output receptacles. Single IEC-320 C20 plug. 20-amp electrical capacity with circuit breaker. 208/230V - 50/60Hz. 1U rack mount. Rugged, industrial-grade metal housing. 10-ft. power cord. Lifetime warranty.

    متوفر في المخزون

    RM641.82

    RM776.4

    Save RM134.59
    أضف إلى العربة
  • CyberPower PDU20BHVIEC8R Basic PDU, 8-Outlets, 230V, 20A, Rack-mountable أضف إلى العربة
  • Liebert
    The Vertiv Liebert POD PD2-106 is a power output distribution (POD) unit with built-in maintenance bypass feature. Designed for the GXT4 8-10kVA uninterruptible power supply (UPS) models, it is a POD that allows you to conduct UPS maintenance and replacements without power interruption to the connected load. It also automatically transfers the current from the UPS to the original power source in cases of UPS failures, saving your equipment from unnecessary downtimes and ensuring continuous uptime for your system. The PD2-106 is a plug-and-play unit that will replace the existing POD box on your UPS. It has four NEMA 5-20R and four NEMA L6-20R output connectors and is equipped with a 2PH+N+G Hardwire 4-wire input connector. It also has a circuit breaker and supports a max current of 60A. More from the Manufacturer

    متوفر في المخزون

    RM2,357.07

    RM3,403.42

    Save RM1,046.35
    أضف إلى العربة
  • Liebert PD2-106 8-Outlets PDU, Power Distribution أضف إلى العربة
    RM2,357.07 RM3,403.42
    Save RM1,046.35
    Liebert PD2-106 8-Outlets PDU, Power Distribution متوفر في المخزون أضف إلى العربة
  • CyberPower
    The CyberPower PDU30BT8F8R, a 16-outlet (8 front, 8 rear) rackmount basic power distribution unit (PDU), provides 100 - 125 V 30A output. It distributes power to 16 NEMA 5-20R receptacles from a single NEMA L5-30P twist lock plug with unfiltered electrical pass-through. Designed for datacenters and other electrically demanding applications, the PDU30BT8F8R has rugged, industrial-grade metal housing and a 12-foot AC power cord. It can be mounted either horizontally or vertically, includes a cord retention tray, and is ETL/RoHS certified. A limited lifetime warranty covers defects in materials and workmanship in the product under normal use and conditions. Power Distribution Delivers AC power to servers, equipment, and connected devices via a power distribution unit.Switch-Free Design Safeguards against accidental power shutdown.Network-Grade Plugs and Outlets Highly durable construction ensures the efficient distribution of power in demanding IT or industrial environments to servers, equipment, and connected devices.Long Input Power Cord Reaches distant power sources, allowing the PDU to be placed where it's needed.Twist Lock Plug Secures an outlet by twisting and locking into place to prevent accidental disconnection.Cord Retention Tray Secures power cords, keeping them organized and accessible. Helps cords stay plugged in.Configurable Mounting Brackets Allow for installation of the PDU in the following configurations: 0U (vertical, under counter, and wall mount), 1U (horizontal, vertical, under counter, and wall mount), and 2U (horizontal and wall mount).Durable Metal Housing Protects internal components and resists damage from impact or abrasions within challenging industrial environments. Also extends the life of the product.Limited Lifetime Warranty Covers defects in materials and workmanship in the product under normal use and conditions. See warranty for details. What's In The Box PDU, Cord Retention Tray, User Manual, Screw Kit, Cord Clip Kit, Horizontal Mounting Brackets, Vertical Mounting Brackets, Product Registration Card

    متوفر في المخزون

    RM1,030.13

    RM1,340.78

    Save RM310.65
    أضف إلى العربة
  • CyberPower PDU30BT8F8R Basic PDU, 16-Outlets, Single Phase, 30A, 100-125V AC أضف إلى العربة
  • Tripp Lite
    ATS PDU allows real-time current metering and remote power monitoring to help prevent circuit overloads and ensure proper load balance. Features Single-Phase 30A 208V/240V ATS PDU Distributes and Monitors Network-Grade Power in Real Time This monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via its built-in network interface. Ideal for network IT applications, small computer rooms and other equipment rack applications, the PDUMNH30HVAT2 features 16 C13, 2 C19, and NEMA L6-30P outlets for connecting equipment. Dual 10-foot (3.1-meter) power cords with NEMA L6-30P inputs connect to separate primary and secondary mains circuits, backup generators, UPS systems or utility power grids, including out-of-phase sources. Switches from Primary to Secondary Power Source in Milliseconds Dynamic solid-state automatic transfer switching (ATS) allows the PDU to switch to the secondary source within 1-5 milliseconds, should the primary source fail or become unstable, to ensure your connected equipment operates without interruption. An on-board ATS processor constantly evaluates the power quality of both input sources. It prevents switching if the secondary source is unavailable or of lower quality than the primary source. Built-In LX Platform Network Management Card Allows Remote Access 24/7 The Java-free HTML5-based WEBCARDLX network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. The latest version of PowerAlert Device Manager (PADM20) provides enhanced remote management capabilities, including customizable dashboard graphs to fit user preferences. The PADM20 upgrade and Tripp Lite's PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurations. Digital Load Meter Helps Prevent Potentially Expensive Overloads A digital ammeter reports the total load for all connected equipment in amps and kilowatts. Monitoring capacity helps ensure load levels remain well below maximum capacity levels with no danger of overload that could lead to costly downtime or damaged equipment. Maintaining proper load levels, even while adding new equipment, can keep your TCO (total cost of ownership) low. Current monitoring provides 1% billing grade accuracy. Mounts into 2U of Rack Space or on a Wall Use the included mounting hardware to install the all-metal housing into 1U of space in an EIA-standard 19-inch rack. You may also use the mounting brackets to secure the PDU to a wall or under a counter. TAA-Compliant for GSA Schedule Purchases The PDUMNH30HVAT2 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts

    متوفر في المخزون

    RM5,233.07

    RM7,604.07

    Save RM2,371
    أضف إلى العربة
  • Tripp Lite PDUMNH30HVAT2 19-Outlets PDU, Monitored, 30A, 230V AC, 5800W أضف إلى العربة
  • CyberPower
    Ensure continued operation of critical devices with the CyberPower PDU24004 Metered ATS PDU. Ideal for data centers and network closets, this unit provides power redundancy to single-corded connected equipment. If power for the primary source exceeds the lower or upper thresholds, or if power fails, the PDU will switch to the secondary power source to ensure continuous operation. The PDU will switch back to the primary power source when incoming power becomes stable. The PDU24004 supports inputs between 200-240V and includes (12) IEC C13 outlets. Dual IEC C14 power cords are plugged into separate power sources (A and B), and information about each power source is provided via LED indicator lights on the front of the unit. Other features include an LCD with selectable background color, ugradeable firmware, and network-grade plugs and outlets. The CyberPower PDU24004 is protected by a three-year limited warranty.

    متوفر في المخزون

    RM1,803.84

    RM2,108.28

    Save RM304.44
    أضف إلى العربة
  • CyberPower Switched ATS PDU - 12-Outlets Power Distribution Unit (PDU24004) أضف إلى العربة
  • Liebert
    The Vertiv Liebert POD PD2-105 is a power output distribution (POD) unit with built-in maintenance bypass feature. Designed for the GXT4 8-10kVA uninterruptible power supply (UPS) models, it is a POD that allows you to conduct UPS maintenance and replacements without power interruption to the connected load. It also automatically transfers the current from the UPS to the original power source in cases of UPS failures, saving your equipment from unnecessary downtimes and ensuring continuous uptime for your system. The PD2-105 is a plug-and-play unit that will replace the existing POD box on your UPS. It has four NEMA 5-30R, two NEMA 5-20R, and NEMA L5-20R output connectors and is equipped with a 2PH+N+G Hardwire 4-wire input connector. It also has a circuit breaker and supports a max current of 60A. More from the Manufacturer

    متوفر في المخزون

    RM1,826.68
    أضف إلى العربة
  • Liebert PD2-105 8-Outlets PDU, Power Distribution for Liebert GXT3-8000RT208, GXT3-10000RT208 أضف إلى العربة
  • Tripp Lite by Eaton
    PDUMH30HV horizontal 2U metered rack PDU supports 30A maximum capacity at 208/240V (agency derated to 24A continuous). Includes 12 ft / 3.6m attached line cord with L6-30P input plug and 18 output receptacles (16 C13, 2 C19). Outlets are arranged in two separately breakered 9 outlet load banks. Set of two visual current meters tracks the output current of each load bank separately. Supports 2U rackmount installation in 19 inch racks. Included cord retention brackets keeps vital network equipment plugged in and continuously powered. More from the Manufacturer

    متوفر في المخزون

    RM1,749.47
    أضف إلى العربة
  • Tripp Lite by Eaton Digital Power Distribution Unit 230V Switched RM w/ Plug Retention 30A (PDUMH30HV) أضف إلى العربة
  • APC by Schneider Electric
    APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment to avoid circuit overload. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency. New AP8000 series Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles.

    متوفر في المخزون

    RM1,762.72
    أضف إلى العربة
  • APC Rack PDU 2G, Switched, ZeroU, 11kW, 230V (AP8981) أضف إلى العربة
    RM1,762.72
    APC Rack PDU 2G, Switched, ZeroU, 11kW, 230V (AP8981) متوفر في المخزون أضف إلى العربة
  • APC by Schneider Electric
    Switched Rack 3.6kVA PDU with single input power source is a power distribution that remotely controls power to individual outlets and monitors the aggregate power consumption. The Switched Rack PDU provides an aggregate current draw, which can be viewed remotely or locally, via digital display. Alarms will be generated based on user-defined thresholds to alert users of potential circuit overloads. Users can access, configure, and control the Switched Rack PDUs through Web, SNMP, or Telnet Interfaces.

    متوفر في المخزون

    RM4,803.64
    أضف إلى العربة
  • APC Switched Rack 3.6kVA PDU (AP7902) أضف إلى العربة
    RM4,803.64
    APC Switched Rack 3.6kVA PDU (AP7902) متوفر في المخزون أضف إلى العربة
  • Panamax
    The VT1512-IP is a BlueBOLT enabled slim form factor vertical rack power conditioner and powersequencer. The VT1512-IP is a full featured power conditioner providing protection and filtration for maximum longevity and performance of connected equipment. BlueBOLT enabled, theVT1512-IP allows remote reboot of 12 individually controlled outlets, as well as the ability to monitor energy use, set alerts, program scheduled commands, network pings with conditioner reboots. For non-Cloud applications the VT1512-IP has an embedded webpage for control and programming, or you can use a LAN for secure control via an ELAN or other 3rd party control systems.

    متوفر في المخزون

    RM5,084.41
    أضف إلى العربة
  • Panamax VT1512-IP 12-Outlets PDU أضف إلى العربة
    RM5,084.41
    Panamax VT1512-IP 12-Outlets PDU متوفر في المخزون أضف إلى العربة
  • APC by Schneider Electric
    APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. Outlet and PDU level power metering for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparalleled deployment flexibility. Maximum outlet density with 42 outlets in a 2.2" wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected.

    متوفر في المخزون

    RM15,833.42

    RM23,506.71

    Save RM7,673.28
    أضف إلى العربة
  • APC NetShelter 42-Outlets PDU (APDU10452MO) أضف إلى العربة
    RM15,833.42 RM23,506.71
    Save RM7,673.28
    APC NetShelter 42-Outlets PDU (APDU10452MO) متوفر في المخزون أضف إلى العربة
  • Eaton
    Designed for data centers, remote site management, the Powerware Switched 24-Outlets 5.76kW PDU provides remote power monitoring of both voltage and current. The current is also displayed on a local two digit current meter. Employing multiple configurations, available in 70" vertical length, providing individual on/off/reboot control of 24 AC power receptacles. The control interface is highly customizable with multiple functions and flexibility, allowing setup to send either SNMP traps or e-mail alerts.

    متوفر في المخزون

    RM2,048.89
    أضف إلى العربة
  • Eaton Powerware Switched 24-Outlets 5.76kW PDU (PW306SW0U156) أضف إلى العربة
    RM2,048.89
    Eaton Powerware Switched 24-Outlets 5.76kW PDU (PW306SW0U156) متوفر في المخزون أضف إلى العربة
  • Tripp Lite by Eaton
    Tripp Lite's PDUMH30 AC power distribution unit offers a digital current monitor and provides 30 amps of 120 volt capacity in a versatile multi-mount cabinet (agency de-rated to 24A continuous). Detachable mounting flanges are configurable for wallmount, under-counter, or 1U/0U rackmount installation. Uses only 1U of rack space when installed in any 19-inch rack, with the potential for zero U mounting in the cable management area of most rack enclosures. Built-in digital ammeter display offers continuous visual input current monitoring data for the entire PDU. Attractive rackmount housing with 12 rear-facing outlets measures only 4.5 inches in depth. Output is arranged in two separately breakered 20A output loading banks. Unfiltered electrical pass-through without a power switch makes the PDUMH30 ideal for distributing UPS or generator power in rack enclosures, network closets, and more. Includes 12 rear-facing NEMA 5-15/20R outlets, 15-ft. AC power cord with L5-30P input plug. TVSS grounding lug and rugged all-metal rackmount case design. More from the Manufacturer

    متوفر في المخزون

    RM2,461.69
    أضف إلى العربة
  • Tripp Lite by Eaton Tripp Lite (PDUMH30) PDU أضف إلى العربة
    RM2,461.69
    Tripp Lite by Eaton Tripp Lite (PDUMH30) PDU متوفر في المخزون أضف إلى العربة
  • HPE
    HP Basic PDUs are designed for simple installation, reliability and cost effective power distribution. They come in a variety of form factors and outlet configurations to meet the needs of today's high-density data center rack environments. With effective power distribution supporting from 12 to 42 outlet receptacles and power levels ranging from 1.9 kVA through 19.9 kVA, HP has the Basic single or 3-phase PDU for any application. The low profile single piece design on these PDU's provides ease of access to rear devices for maintenance consideration and provides multiple mounting options. They are designed for HP racks but will also work in a large variety of third party racks. They can be installed on either side of the rack with outlets facing the back of the rack for easy access and improved clearance. For higher power density they can be installed side by side on both sides of the rack with the outlets facing in towards the center of the rack.

    متوفر في المخزون

    RM3,261.62
    أضف إلى العربة
  • HPE E 4.9kVA 208 Volt 30 Outlet NA/JP Basic Power Distribution Unit (H5M59A) أضف إلى العربة
    RM3,261.62
    HPE E 4.9kVA 208 Volt 30 Outlet NA/JP Basic Power Distribution Unit (H5M59A) متوفر في المخزون أضف إلى العربة
  • Middle Atlantic
    More than power distribution, the Premium+ PDU with RackLink™ is the most advanced - yet simplest - to use IP control solution for Remote System Management in the industry. Developed around a platform that has been proven on the most secure networks in the world, this next-generation power distribution unit provides unmatched monitoring, control, logging, security and power protection capabilities available for demanding AV applications. The RackLink™ technology allows you to control locally or virtually through 3rd party AV control systems, cloud platforms and SNMP for flexible management that is smarter, faster and reduces service costs. Simple system setup with advanced capabilities Save programming with integrated scheduling, variable timed sequencing, ping sequencing, auto healing, thresholds, and multiple notification options. Easily connect to control and IT systems with universal compatibility through custom drivers, SNMP v3/MIB, RESTful API, and 3rd party integrations. Connecting via Wi-Fi with a 3rd party dongle dramatically reduces the number of Ethernet ports required Configure one PDU or a thousand PDUs in a matter of moments with the ability to save your configuration files Remotely update firmware without having to shut down the PDU, ensuring consistent system uptime Best-in-class monitoring, logging, and data reporting for remote system management with a user-friendly interface. zuperior metering accuracy of total power draw down to outlet level including current, voltage, power, power factor and energy usage Patent-pending IP sequencing sets user-defined delays and establishes that an IP device will not power on until its networked companion is powered on Connect up to 32 environmental sensors to monitor the temperature and humidity and alert potential threats that could cause system downtime Industry-leading network security and support of IT protocols for demanding end users SSL/TLS Certificates SSH HTTPS Self-signed certificates Protect valuable AV equipment with patented Series Protection™; safeguarding critical systems against: Surge Over voltage Under voltage Noise Built in partnership with Raritan, a leader in the growing intelligent power market, using their Xerus platform to deliver robust security features and intelligence Compliant with AVIXA Energy Management Standard to support energy efficient AV system design, monitoring and optimization.

    متوفر في المخزون

    RM6,596.1

    RM10,507.34

    Save RM3,911.24
    أضف إلى العربة
  • Middle Atlantic RLNK-P915R-SP RackLink 9-Outlets PDU, Surge Protection, 15A, 120V AC أضف إلى العربة
  • Middle Atlantic
    Premium+ Rack Mount PDU with RackLink™ Series power management products shall be Middle Atlantic Products model # RLNK-P920R. Premium+ Rack Mount PDU with RackLink™ power products shall be 1.75"H x 19"W x 9.83"D. Premium+ Rack Mount PDU with RackLink™ shall have a 20 amp power capacity. Premium+ Rack Mount PDU with RackLink™ shall provide two-stage MOV Series surge and spike protection. Premium+ Rack Mount PDU with RackLink™ shall provide 9 total outlets, 8 of which shall be individually controllable. Premium+ Rack Mount PDU with RackLink™ shall include a 9' power cord. Premium+ Rack Mount PDU with RackLink™ shall monitor specific remote IP devices and services and shall automatically reboot an unresponsive network device and provide alerts via e-mail. Premium+ Rack Mount PDU with RackLink™ shall allow local export of log files in CSV format, and shall allow log files to be extracted to 3rd party databases via IP. Premium+ Rack Mount PDU with RackLink™ shall include an integrated web server for browser-based access and control. Premium+ Rack Mount PDU with RackLink™ shall support the SNMP, SSL/TLS/SSH, SMTP, NTP, DDNS, Cloud, CLI TCIP/IP/USB RS-232, HTTPS, HTTP, HyperTerminal, and Telnet communication protocols. Premium+ Rack Mount PDU with RackLink™ shall support up to 32 external sensors. Premium+ Rack Mount PDU with RackLink™ shall be Wi-Fi capable. Premium+ Rack Mount PDU with RackLink™ shall have an LCD Display. Premium+ Rack Mount PDU with RackLink™ shall support the Internet Explorer 11, Windows Edge, Firefox 25 and later, Safari (MAC) Google Chrome, Android, and iOS web browsers. Premium+ Rack Mount PDU with RackLink™ shall utilize an open-architecture serial communications protocol that is cloud compliant without being cloud dependent, and provide an API for seamless integration into any IP based architecture. Premium+ Rack Mount PDU with RackLink™ shall be fully compliant with any control system or aggregator. Premium+ Rack Mount PDU with RackLink™ shall be constructed of phosphate pre-treated steel with a black powdercoat finish. Premium+ Rack Mount PDU with RackLink™ shall meet the EU RoHS Directive 2011/65/EU. Premium+ Rack Mount PDU with RackLink™ shall be manufactured by an ISO 9001 and ISO 14001 registered company. Premium+ Rack Mount PDU with RackLink™ shall be warrantied to be free from defects in materials and workmanship under normal use and conditions for a period of 3 years. Premium+ Rack Mount PDU with RackLink™ shall be listed to UL standard 60950-1 in US and to CAN/CSA C22.2 #60950-1 in Canada and FCC Part 15, Class B.

    متوفر في المخزون

    RM6,055.38

    RM8,682.22

    Save RM2,626.84
    أضف إلى العربة
  • Middle Atlantic RLNK-P920R RackLink 9-Outlets PDU, 20A, 120V AC, Spike and Surge Protection أضف إلى العربة