特性:Tripp Lite SMART1000RM1UN 1kVA 机架式 UPS,1000 VA/800 W,4 分钟备用 品牌:Tripp Lite 翻译品牌名:特力帕立
特性:Tripp Lite SMART1000RM1UN 1kVA 机架式 UPS,1000 VA/800 W,4 分钟备用 品牌:Tripp Lite 翻译品牌名:特力帕立
Tripp Lite SMART1000RM1UN
- Free Shipping
- 1年 保修
- 30天退货
- 碳中和
产品关键特征
- 校正从83V到147V的过低和过高电压
- 6个NEMA 5-15R插座-2个可通过网络接口开关
- 网络电源管理和控制功能
- 预安装的WEBCARDLX网络接口
- 半载运行时间14分钟;全载运行时间4分钟
特性:Tripp Lite SMART1000RM1UN 1kVA 机架式 UPS,1000 VA/800 W,4 分钟备用 品牌:Tripp Lite 翻译品牌名:特力帕立
Tripp Lite SMART1000RM1UN
- Free Shipping
- 1年 保修
- 30天退货
- 碳中和
小时
分钟
航运资讯
产品关键特征
- 校正从83V到147V的过低和过高电压
- 6个NEMA 5-15R插座-2个可通过网络接口开关
- 网络电源管理和控制功能
- 预安装的WEBCARDLX网络接口
- 半载运行时间14分钟;全载运行时间4分钟
Tripp Lite
SMART1000RM1UN
保护任务关键的机架式设备
- 为服务器、网络存储设备和电信硬件提供全电压正弦波交流输出
- 听得见的警报信号表明失去公用事业电源、超负荷和低电池
- 6个NEMA 5-15R插座
- 10英尺(3.05米)长的电源线,带120V NEMA 5-15P输入
- 450焦耳的浪涌抑制等级
- 支持半载到14分钟和全载到4分钟
- 内置电池设计用于热交换现场更换
- 通过安全的Web浏览器、SNMP、Telnet、SSH和CLI允许进行完全远程访问以进行电源监控、配置、控制和电子邮件通知
- 可选的E2传感器(单独销售)可实现温度、湿度和接触闭合状态的站点监控
- LX平台界面的自动探针功能(固件15.5.2及更高版本)检查任何网络设备的连接状态,如果设备未响应,则自动采取一个或多个用户配置的操作;这些操作包括插座重启、设置SNMP陷阱、SNMP OID设置,甚至当与Tripp Lite PowerAlert Network Shutdown Agent(PANSA)一起使用时执行脚本
- 2个负载组,每个负载组均可通过远程控制一个插座以重新启动设备或移除非必要的负载
自动电压调节(AVR)
- 在83V-147V的输入范围内保持120V名义输出,无需使用电池电源
电磁干扰/射频线路噪声过滤
- 消除可能干扰或损坏设备性能的电磁和无线电频率干扰
LED指示灯
- 前面板LED指示电源、电压校正、负载水平和电池充电状态
通信端口
- USB和DB9端口,与Tripp Lite的PowerAlert软件配合使用时可实现数据保存式无人值守关机(可在www.tripplite.com/poweralert免费下载)
- EPO端口支持在大型设施中进行紧急关机
多样的安装选项
- 附带用于安装在EIA标准19英寸2或4柱机架的1U的硬件
- 可选的4POSTRAILKIT1U配件可用于4柱安装的额外支持
- 与垂直安装机柜兼容
Power Protection and Battery Backup
Between severe weather, the aging electrical grid and unavoidable hazards lurking inside your own walls, your servers and network hardware are under constant attack from power problems. Even a brief loss of power or a momentary surge can damage your equipment, corrupt your data, bring down your network and hurt your bottom line. Prevent damage, downtime and data loss by installing this SmartPro UPS system. It conditions incoming AC power to protect your equipment, provides enough battery backup to outlast most outages and allows critical systems to shut down gracefully to prevent data loss and corruption during extended blackouts.
Common Applications
Protect Servers and Network Hardware: Application Servers, Storage Servers, Database Servers, File Servers, Virtualization Servers, Proxy Servers, Web Servers, Media Servers, VoIP Servers, Network-Attached Storage, Network Switches, PoE Switches, Firewalls, Network Appliances, Bridges, Gateways, Routers.
Protect Equipment with Active PFC Power Supplies: Active PFC power supplies found in many devices require pure sine wave power.
Pure Sine Wave Output
When operating from battery power, a UPS system generates the waveform of its AC output. Many UPS systems generate PWM sine wave power, an approximation of the pure sine wave power you receive from your electrical utility. Although PWM sine wave power is compatible with most equipment, pure sine wave power is required by some devices -- such as computers with active PFC power supplies -- and prevents others from overheating, malfunctioning or failing prematurely. This UPS system generates pure sine wave power for superior compatibility with active PFC power supplies and other sensitive equipment.
Reliable Battery Backup
- Half-Load Runtime: This UPS system will support a 50% load (400 W) for up to 14 minutes.
- Hot-Swappable Batteries: The internal batteries can be replaced without turning off the UPS system and disrupting the operation of connected equipment.
Advanced AVR and Surge/Noise Protection
In locations with chronic voltage problems, frequent switching to battery drains reserve power and shortens battery life. This UPS system has a feature called automatic voltage regulation (AVR) that solves the problem. The UPS detects when input voltage is out of bounds and corrects it without using the battery.
All Tripp Lite UPS systems also include built-in surge protection and noise filtering to shield your equipment from destructive transient voltages and electromagnetic (EMI/RFI) line noise.
Flexible Management Options
There are several ways to manage this UPS system:
1. Use the front-panel LEDs for convenient local management.
2. Use the USB port with your computer's built-in power management features.
3. Use the USB or serial port with your computer and Tripp Lite's PowerAlert software.
4. Use the pre-installed WEBCARDLX network card for standalone remote management via SNMP, Web, SSH or telnet.
LED Control Panel
The intuitive multicolor LEDs display a variety of helpful and important information, including power status, voltage regulation status, connected load level, battery charge level and battery condition.
Environmentally Responsible Design
- High Efficiency: This UPS system saves energy, produces less heat, shrinks your carbon footprint and reduces annual operating costs.
- User-Replaceable Battery: This UPS system has a user-replaceable, recyclable battery, allowing it to remain in service instead of going to a landfill.
- RoHS Compliance: This UPS system complies with the RoHS (Restriction of Hazardous Substances) Directive, limiting the use of hazardous substances in manufacturing.
Dependable Service from an Industry Leader
- 3-Year Product Warranty: If this UPS system (including the internal battery) proves defective in material or workmanship within that period, Tripp Lite will repair or replace it at no charge.
- Insurance: Tripp Lite will repair or replace connected equipment damaged by surges – even lightning strikes!
- Free Tech Support: Chicago-based, in-house tech specialists are available by phone, email and chat.
A Industry Leader
- Over 95 Years: Founded in 1922, Tripp Lite has a long-established and proven track record of providing reliable products and responsive customer service.
- Trusted Name: From the smallest office to the largest data center, customers worldwide trust Tripp Lite to power, protect, manage and connect valuable IT equipment. Third-Party Safety Testing and ISO 9001 Certification
Return Policy |
Time to Return |
Standard Return Policy |
We offer a hassle-free 30-day returns policy for domestic (US) orders, excluding non-refundable items. Refund or Replacement within 30 days of the delivery date. All products that fall under the Standard Return Policy qualify for our 30-Day Hassle-Free Returns. Please see the section above for more details. |
Replacement Only Return Policy |
Replacement within 30 days of the delivery date. |
Manufacturer Only Return Policy |
Covered by the manufacturer's warranty. Please refer to the terms and conditions for the manufacturer's warranty or contact the manufacturer. |
Holiday Extended Return Policies |
Extended Holiday Return Policy.Qualifying purchases of products displaying the " Extended Holiday Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Refund or Replacement until January 31, 2024. Extended Holiday Replacement-Only Return PolicyQualifying purchases of products displaying the " Extended Holiday Replacement-Only Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Replacement until January 31, 2024. |