特利普利 Tripp Lite B002A-DP1AC8 8 通道 NIAP PP3.0 认证的 DisplayPort KVM 开关,3840 x 2160 分辨率,3 年保修
特利普利 Tripp Lite B002A-DP1AC8 8 通道 NIAP PP3.0 认证的 DisplayPort KVM 开关,3840 x 2160 分辨率,3 年保修
Tripp Lite B002A-DP1AC8
- Free Shipping
- 1年 保修
- 30天退货
- 碳中和
产品关键特征
- 安全地、可靠地在8台安全级别不同的隔离计算机之间切换
- 符合NIAP/Common Criteria Peripheral Sharing Switches V3.0的保护配置文件认证
- 智能卡口支持生物识别和其他智能卡阅读器
- 支持4K @ 30 Hz的UHD分辨率,视频清晰
- 符合联邦贸易协定法案(TAA)要求,适用于GSA计划购买
特利普利 Tripp Lite B002A-DP1AC8 8 通道 NIAP PP3.0 认证的 DisplayPort KVM 开关,3840 x 2160 分辨率,3 年保修
Tripp Lite B002A-DP1AC8
- Free Shipping
- 1年 保修
- 30天退货
- 碳中和
小时
分钟
航运资讯
产品关键特征
- 安全地、可靠地在8台安全级别不同的隔离计算机之间切换
- 符合NIAP/Common Criteria Peripheral Sharing Switches V3.0的保护配置文件认证
- 智能卡口支持生物识别和其他智能卡阅读器
- 支持4K @ 30 Hz的UHD分辨率,视频清晰
- 符合联邦贸易协定法案(TAA)要求,适用于GSA计划购买
Tripp Lite
B002A-DP1AC8
特点
8端口DisplayPort KVM切换器适用于需要安全网络的应用
这款八端口KVM切换器适用于任何需要高度安全保护敏感数据的政府、军事、金融或医疗保健环境,在不断变化的网络威胁中具有至关重要的安全性。每个KVM端口都是电子隔离通道,使连接的计算机之间无法通过KVM传输数据。单显示器切换器支持高清晰度视频分辨率,最高可达3840 x 2160 (4K x 2K),刷新率为30 Hz。
NIAP PP3.0认证,满足当今顶级信息保障标准
这款KVM切换器已获得NIAP (国家信息保障伙伴关系) 认证,符合最新的Peripheral Sharing Switches Version 3.0的Common Criteria Protection Profile。对每个连接的系统采用独立的处理路径,防止数据泄露、传输和相邻端口之间的串扰。外围设备隔离使数据只能从设备传输到主机。
顶级安全功能确保您的数据安全
特殊保护措施防止固件重新编程,因此切换器的KVM逻辑保持不变。数据传输后键盘缓冲区会自动清除,确保没有信息留存。此外,只能通过切换器面板上的按钮访问连接的计算机。其他端口切换方法,如On-Screen Display (OSD)和Hotkey Commands,已被排除,进一步确保数据完整性。
CAC端口支持生物识别和其他智能卡阅读器
通用访问卡(Common Access Card)端口支持智能卡、扫描仪和生物识别读卡器,包括指纹读卡器,以加强安全性。您可以将特定外围设备分配和注册到CAC端口,提供用户认证的安全连接。
防篡改保护阻止物理入侵
如果机箱被打开,内部的防篡改开关将使该设备失效,导致前面板的LED重复闪烁。外壳上的封条将提供颠倒的篡改证据。
保持恒定的键盘和鼠标仿真,实现平滑无延迟切换
全USB设备过滤确保仅支持键盘和鼠标。这款KVM切换器还支持安全视频仿真和EDID学习,防止不需要的数据通过DDC线传输。键盘/鼠标和视频仿真控制器都会在切换操作期间限制新连接外设或显示器的发现,保护您的计算机免受潜在的漏洞威胁。
配套电缆套件 - P783-006-U 和 P783-010-U
专门为B002A-DP1AC8设计,Tripp Lite的P783-006-U 和 P783-010-U KVM电缆套件(单独销售)有助于消除不必要的混乱,并通过将电缆合并为一个便捷套件来为您节省金钱。这些电缆符合HDCP 2.2和DisplayPort 1.2标准,并支持USB 2.0速度高达480 Mbps。
符合GSA计划采购的TAA合规
B002A-DP1AC8符合联邦贸易协议法案(TAA),可以符合GSA(总务管理局)计划和其他联邦采购合同的要求。
典型应用
- 从单个监视器/键盘/鼠标控制具有不同安全级别的8台计算机
- 通过CAC端口操作智能卡、扫描仪、指纹读卡器等生物识别设备
- 保护医疗或军事情报等私人信息免受网络攻击
Safely switch between computers on different networks!
NIAP-Certified Secure KVM Switches
Get complete network control with military-level security! This NIAP-certified DisplayPort KVM switch is recommended for government, military, financial or healthcare environments where tight security of sensitive data is of utmost importance. Each KVM port is an electronically isolated channel, making it virtually impossible for data to be transferred between connected computers through the KVM. Special protection prevents re-programming of firmware, so the switch’s KVM logic remains unaltered. The keyboard buffer clears automatically after data transmission, and the only way to access connected computers is via buttons on the switch’s panel.
Innovative features for premium performance
NIAP PP3.0 certified
The B002A-DP1AC8 is certified by the National Information Affirmation Partnership (NIAP), which is operated by the National Security Agency (NSA), to the latest Common Criteria Protection Profile for Peripheral Sharing Switches Version 3.0.
- Discrete processing paths to each connected system prevent data leakage, transfer and crosstalk between adjacent ports.
- Peripheral isolation enables data to flow from device to host only.
- Compliant with the Federal Trade Agreements Act (TAA) for GSA (General Services Administration) Schedule and other federal procurement contracts.
Anti-tampering protection
A tamper-proof logic board and sealed warning labels provide clear visual evidence if the KVM’s housing has been opened and the switch has been compromised.
- If the housing is opened, internal anti-tamper switches will disable the KVM, rendering it inoperable and causing its front-panel LEDs to flash repeatedly.
- All internal electronic components are soldered directly to the switch’s board.
- The KVM only recognizes HID USB devices, such as keyboards and mice, to prevent inadvertent and insecure data transfer.
User-friendly design
To get the B002A-DP1AC8 up and running, all you need are a DisplayPort monitor, wired USB mouse and keyboard, and a DisplayPort- and USB-enabled computer. It supports Windows, Mac and Linux platforms.
- The single-monitor switch supports UHD video resolutions up to 3840 x 2160 (4K x 2K) at 30 Hz.
- The switch’s Common Access Card (CAC) port supports smart cards, scanners and biometric readers to bolster security.
- Specific peripherals may be assigned and registered to the CAC port, providing a secure connection for user authentication.
- Optional P783-006-U and P783-010-U cable kits (sold separately) help eliminate unnecessary clutter and save you money by combining cables into one convenient kit.
Smooth operation
This KVM switch maintains constant keyboard and mouse emulation for smooth, no-delay switching.
- Full USB device filtering ensures support for keyboard and mouse only.
- Supports secure video emulation and EDID learning, preventing unwanted data from transmitting through the DDC lines.
- Emulation controllers restrict discovery of newly connected peripherals during switching operations, shielding your computers from potential vulnerabilities.
Why Choose Tripp Lite?
Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, protect, manage, house, cool, connect and mount your equipment. From the largest data center to the smallest home office, Tripp Lite products keep your equipment running effectively and efficiently. Whether you need to supply power to servers and have reliable battery backup, connect high-resolution video sources to displays and digital signs, or organize and secure IT equipment in rack enclosures, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With over 90 years of quality products and service, Tripp Lite is a brand you can trust.
Return Policy |
Time to Return |
Standard Return Policy |
We offer a hassle-free 30-day returns policy for domestic (US) orders, excluding non-refundable items. Refund or Replacement within 30 days of the delivery date. All products that fall under the Standard Return Policy qualify for our 30-Day Hassle-Free Returns. Please see the section above for more details. |
Replacement Only Return Policy |
Replacement within 30 days of the delivery date. |
Manufacturer Only Return Policy |
Covered by the manufacturer's warranty. Please refer to the terms and conditions for the manufacturer's warranty or contact the manufacturer. |
Holiday Extended Return Policies |
Extended Holiday Return Policy.Qualifying purchases of products displaying the " Extended Holiday Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Refund or Replacement until January 31, 2024. Extended Holiday Replacement-Only Return PolicyQualifying purchases of products displaying the " Extended Holiday Replacement-Only Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Replacement until January 31, 2024. |