Tripp Lite PDUMV30NETLX 2.9kW 单相开关PDU,24个插座,远程插座开关 品牌名称:Tripp Lite 特力匹 PDUMV30NETLX 2.9kW 单相开关PDU,24个插座,远程插座开关
Tripp Lite PDUMV30NETLX 2.9kW 单相开关PDU,24个插座,远程插座开关 品牌名称:Tripp Lite 特力匹 PDUMV30NETLX 2.9kW 单相开关PDU,24个插座,远程插座开关
Tripp Lite PDUMV30NETLX
- Free Shipping
- 1年 保修
- 30天退货
- 碳中和
产品关键特征
- 2.9kW 120V switched PDU
- 24 个可单独控制的 NEMA 5-15/20R 插座
- 内置 LX 平台界面,可随时远程访问
- 数字电流表,可实时监测现场负载
- NEMA L5-30P 输入,带 10 英尺交流电源线
Tripp Lite PDUMV30NETLX 2.9kW 单相开关PDU,24个插座,远程插座开关 品牌名称:Tripp Lite 特力匹 PDUMV30NETLX 2.9kW 单相开关PDU,24个插座,远程插座开关
Tripp Lite PDUMV30NETLX
- Free Shipping
- 1年 保修
- 30天退货
- 碳中和
小时
分钟
航运资讯
产品关键特征
- 2.9kW 120V switched PDU
- 24 个可单独控制的 NEMA 5-15/20R 插座
- 内置 LX 平台界面,可随时远程访问
- 数字电流表,可实时监测现场负载
- NEMA L5-30P 输入,带 10 英尺交流电源线
Tripp Lite
PDUMV30NETLX
PDUMV30NETLX 2.9kW 单相切换式PDU 提供先进的网络控制和远程电源监视功能,可以打开、关闭、重新启动或锁定每个插座的电源。推荐用于任何 IT 或工业应用,具有 24 个带有连接线保持夹的切换式 NEMA 5-15/20R 插座,以防止电缆意外断开。带有 NEMA L5-30P 插头的 10 英尺电缆将 PDU 连接到兼容的交流电源、发电机或受保护的 UPS。
内置的 Java 免费基于 HTML5 的 LX 平台网络界面通过安全的 Web 浏览器、SNMP、telnet 或 SSH 实现完整的远程访问,用于 PDU 状态监视和电子邮件通知。它支持 10/100 Mbps 自动感应,以便与以太网网络进行最佳通信。可选的 EnviroSense2 模块(单独销售)提供各种环境监测功能。支持的协议包括 HTTP、HTTPS、SMTP、SNMPv1、SNMPv2、SNMPv3、telnet、SSH、FTP、DHCP 和 NTP。
数字电流表允许您实时监视每个分段的负载,确保其始终远低于最大容量,并没有超负荷的危险。垂直式 PDU 可通过包含的无工具固定按钮或包含的机架固定支架在 EIA 标准 19 英寸机架中占用 0U 空间。使用包含的 PDUMVROTATEBRKT 套件可以安装单元,使插座面向后方,以获得更好的空气流动或设备访问。
特点
分配网络级单相电源
- 2.9kW 120V 切换式 PDU
- 推荐用于需要单独插座控制、负载摆脱和对关键网络组件进行远程监视的网络应用
- 具有 NEMA L5-30P 插头和 10 英尺电缆,连接到兼容的交流电源
- 固件升级支持未来产品增强
24 个切换式插座分配交流电源
- 24 个 NEMA 5-15/20R 插座分成 2 个分开断路负载块
- 可以远程控制单个插座以开启、关闭、重新启动或锁定设备
- 电缆保持夹可防止电缆意外断开
数字电流表
- 报告每个分段的负载水平和总 PDU 输出
- 支持 IP 地址自我识别
- 可旋转 180°,以便在任一角度轻松阅读
内置 LX 平台界面
- 允许通过安全的 Web 浏览器、SNMP、telnet 或 SSH 进行电源监视的完整远程访问
- 支持 10/100 Mbps 自动感应,与以太网网络通信
- 可选的 EnviroSense2 模块(单独销售)提供各种环境监测功能
- 无需 Java
广泛的通信兼容性
- 支持 HTTP、HTTPS、SMTP、SNMPv1、SNMPv2、SNMPv3、telnet、SSH、FTP、DHCP 和 NTP
- 支持 IP 地址的自动和手动分配
易于在 EIA 标准 19 英寸机架中安装 0U
- 使用包含的无工具按钮或机架固定支架垂直安装
- 包含的 PDUMVROTATEBRKT 可以安装具有面向后方插座的单元
符合 TAA 要求
- 符合联邦贸易协定法案(TAA)要求,适用于 GSA 计划购买
Distributes, Monitors and Manages Single-Phase Power with No Java Required
Tripp Lite's PDUMV30NETLX 2.9kW Single-Phase Switched PDU is an efficient, cost-effective, next-generation power distribution solution with remote monitoring and control capabilities. Each of its 24 NEMA 5-15/20R outlets can be turned on, turned off, rebooted or locked via Web interface, and you can monitor each outlet’s power consumption both remotely and via the unit’s ammeter. Designed for users who prefer a Java-free interface, this advanced PDU uses 30A 120V single-phase input to distribute 100-127V single-phase output to two separately breakered 20A load banks. It’s recommended for any IT or industrial application but especially those requiring individual outlet control, regular load shedding and remote monitoring of critical components. Its 10-foot cord with locking L5-30P plug connects to a compatible power source, generator or UPS.
HTML5-Based Interface Provides Advanced Network Monitoring & Control Capability
Featuring a built-in, Java-free, HTML5-based LX Platform interface (the mobile-friendly PowerAlert Device Manager), the PDUMV30NETLX provides complete remote access for power monitoring, configuration, control and email notifications via a secure network or Web browser. When used with an optional EnviroSense2 environmental sensor (sold separately), it can also perform temperature/humidity and dry contact monitoring, providing IT personnel with enhanced oversight of facility power and environmental conditions. As an added bonus, up to three EnviroSense2 modules can be daisy-chained together. The PDUMV30NETLX supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Automated alerts can be configured to warn against potential overload, power loss and downtime. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. DHCP/Manual configuration support provides the ability to have network settings automatically assigned or manually assigned via a permanent IP address.
Supports Individual Outlet Current Monitoring and Remote Out
The PDUMV30NETLX offers the ability to turn on, turn off, recycle, or lock out power to any of its 24 outlets as well as locally and remotely monitor each outlet’s output power consumption with 1% billing grade accuracy. This allows you to more efficiently manage network power consumption and properly balance loads, both remotely and on site. So if equipment needs to be rebooted on a Sunday—no problem! Simply log on from wherever you are and take care of business remotely.
Supports Individual Outlet Current Monitoring and Remote Out
The PDUMV30NETLX offers the ability to turn on, turn off, recycle, or lock out power to any of its 24 outlets as well as locally and remotely monitor each outlet’s output power consumption with 1% billing grade accuracy. This allows you to more efficiently manage network power consumption and properly balance loads, both remotely and on site. So if equipment needs to be rebooted on a Sunday—no problem! Simply log on from wherever you are and take care of business remotely.
Integrates Easily Into Your Existing Infrastructure
This PDU is configurable with included hardware for 0U (vertical) installation in the cable management area of most rack enclosures. It also supports toolless button-mount installation. Vertical 0U installation promotes efficient airflow in the rack, and included cord retention brackets reduce cable clutter. An included PDUMVROTATEBRKT kit allows the PDU to be mounted with rear-facing outlets for improved airflow and equipment access. Included cable ties prevent cables from becoming accidentally disconnected from their outlets.
Comes Backed by a 2-Year Warranty
The PDUMV30NETLX comes with a 2-year warranty. It’s manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite’s commitment to environmental responsibility.
The PDUMV30NETLX is compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Why Choose Tripp Lite?
Founded in 1922 in Chicago, Illinois, Tripp Lite is one of the leading manufacturers of products to power, protect, manage, house, cool, connect and mount your equipment. From the largest data center to the smallest home office, Tripp Lite products keep your equipment running effectively and efficiently. Whether you need to supply power to servers and have reliable battery backup, connect high-resolution video sources to displays and digital signs, or organize and secure IT equipment in rack enclosures, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With 95 years of quality products and service, Tripp Lite is a brand you can trust.
Return Policy |
Time to Return |
Standard Return Policy |
We offer a hassle-free 30-day returns policy for domestic (US) orders, excluding non-refundable items. Refund or Replacement within 30 days of the delivery date. All products that fall under the Standard Return Policy qualify for our 30-Day Hassle-Free Returns. Please see the section above for more details. |
Replacement Only Return Policy |
Replacement within 30 days of the delivery date. |
Manufacturer Only Return Policy |
Covered by the manufacturer's warranty. Please refer to the terms and conditions for the manufacturer's warranty or contact the manufacturer. |
Holiday Extended Return Policies |
Extended Holiday Return Policy.Qualifying purchases of products displaying the " Extended Holiday Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Refund or Replacement until January 31, 2024. Extended Holiday Replacement-Only Return PolicyQualifying purchases of products displaying the " Extended Holiday Replacement-Only Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Replacement until January 31, 2024. |