Tripp Lite PDU chuyển đổi PDUMH30ATNET 25 ổ cắm gắn rack 2U
Tripp Lite PDU chuyển đổi PDUMH30ATNET 25 ổ cắm gắn rack 2U
Tripp Lite PDUMH30ATNET
- Free Shipping
- 1 Year Warranty
- 30 Day Returns
- Carbon Neutral
Product Key Features
- Bộ chuyển đổi tự động 30A 120V một pha / ATS PDU; Chuyển đổi trạng thái rắn đáng tin cậy cao
- Kích hoạt tùy chọn nguồn A/B dự phòng cho các thiết bị mạng không dự phòng
- Giao diện mạng nền tảng LX tích hợp sẵn
- Gắn rack 2U, 2 đầu vào L5-30P, 25 ổ cắm có thể chuyển đổi (24 5-15/20R, 1 L5-30R)
- Các ổ cắm được chuyển đổi riêng biệt và giao diện mạng tích hợp cho phép điều khiển và giám sát từ xa
hrs
mins
Thông tin vận chuyển
Tripp Lite PDU chuyển đổi PDUMH30ATNET 25 ổ cắm gắn rack 2U
Tripp Lite PDUMH30ATNET
- Free Shipping
- 1 Year Warranty
- 30 Day Returns
- Carbon Neutral
hrs
mins
Thông tin vận chuyển
Product Key Features
- Bộ chuyển đổi tự động 30A 120V một pha / ATS PDU; Chuyển đổi trạng thái rắn đáng tin cậy cao
- Kích hoạt tùy chọn nguồn A/B dự phòng cho các thiết bị mạng không dự phòng
- Giao diện mạng nền tảng LX tích hợp sẵn
- Gắn rack 2U, 2 đầu vào L5-30P, 25 ổ cắm có thể chuyển đổi (24 5-15/20R, 1 L5-30R)
- Các ổ cắm được chuyển đổi riêng biệt và giao diện mạng tích hợp cho phép điều khiển và giám sát từ xa
Tripp Lite
PDUMH30ATNET
Tripp Lite ATS chuyển đổi tự động / Auto Transfer Switch cung cấp tùy chọn nguồn dự phòng cho các thiết bị mạng sử dụng một dây nguồn. Hai dây nguồn đầu vào hỗ trợ kết nối riêng biệt với nguồn điện CHÍNH và THỨ YẾU. ATS sẽ thường duy trì đầu ra liên tục cho tất cả các ổ cắm từ dây nguồn đầu vào chính. Nếu nguồn điện chính trở nên không ổn định hoặc hoàn toàn ngừng hoạt động, ATS sẽ chuyển sang nguồn điện thứ yếu cho đến khi nguồn đầu vào chính được phục hồi và ổn định. Việc chuyển đổi giữa các nguồn đầu vào chính và thứ yếu được thực hiện rất đáng tin cậy với thời gian chuyển đổi từ 1-5 mili giây. Các tính năng của PDU chuyển đổi bao gồm các ổ cắm đầu ra có thể điều khiển riêng lẻ và giao diện mạng tích hợp. Việc chuyển giao siêu nhanh giữa các nguồn điện chính và thứ yếu xảy ra trong vài mili giây. Chức năng ATS được hỗ trợ bởi bất kỳ hai nguồn điện AC tương thích nào, bất kể góc pha, để hỗ trợ nhiều ứng dụng mạng cung cấp điện dự phòng nâng cao. Cho phép bảo vệ UPS chịu lỗi, có thể thay thế nóng khi sử dụng với một UPS duy nhất và bảo vệ UPS hoàn toàn dự phòng khi mỗi dây được kết nối với một hệ thống UPS riêng biệt. Trong môi trường hai UPS, dây nguồn đầu vào chính phải được hỗ trợ bởi một UPS sóng sine toàn thời gian với thời gian chuyển đổi bằng không. Dòng sản phẩm Tripp Lite SmartOnline được khuyến nghị cao để sử dụng làm UPS chính trong ứng dụng hai UPS. Các cấu hình ATS sử dụng các mạch điện mạng riêng biệt, máy phát điện dự phòng và thậm chí các nguồn điện lưới tiện ích riêng biệt đều được hỗ trợ đầy đủ. Bộ xử lý ATS tích hợp liên tục đánh giá chất lượng điện năng trên cả hai nguồn đầu vào để ngăn chặn việc chuyển sang nguồn thứ yếu khi không có hoặc chất lượng thấp hơn nguồn chính. Đèn LED đầu vào phía trước hiển thị tính khả dụng của nguồn điện chính hoặc thứ yếu. Thẻ giao diện quản lý mạng LX Platform tích hợp. Giao diện mạng dựa trên HTML5 không cần Java của LX Platform cho phép truy cập từ xa đầy đủ để theo dõi trạng thái PDU và thông báo qua email thông qua trình duyệt web bảo mật, SNMP, telnet hoặc SSH. Nó hỗ trợ tự động phát hiện 10/100 Mbps để giao tiếp tối ưu với mạng Ethernet. Các mô-đun EnviroSense2 tùy chọn (bán riêng) cung cấp nhiều khả năng giám sát môi trường. Các giao thức được hỗ trợ bao gồm HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP và NTP.
2.9kW Single-Phase ATS/Switched PDU Provides a Redundant Power Option
Tripp Lite’s PDUMH30ATNET ATS/Switched PDU provides all the management features of a switched PDU, plus a redundant 120V power option for single-corded network devices in data centers, network closets, server rooms, computer rooms and other environments requiring network-grade power. This PDU has 25 switched outlets (24 NEMA 5-15/20R and 1 L5-30R) and supports mounting in 2U of rack space, on a wall or under a counter.
Product Specifications
Primary and Secondary Inputs for Power Redundancy
To provide redundant power for network devices, this PDU has dual 10 ft. (3 m) input power cords with NEMA L5-30P plugs for connection to compatible AC power sources, including separate mains circuits, backup generators and separate utility power grid feeds. Dual inputs also enable fault tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full-time sine wave UPS with zero transfer time, such as a Tripp Lite SmartOnline UPS.
Switches to Secondary Power Source in Milliseconds
The easy-to-read two-character LCD load meter displays the total connected equipment load, as well as the loads carried by both banks, so you can assure proper load balancing. By monitoring the total load in real time, you allow equipment to be safely connected with no danger of overloading the PDUMH30NET or power supply circuits.
Control Individual Outlets from Anywhere 24/7
For a higher level of network power control, the 16 NEMA 5-15/20R outlets can be individually controlled in real time. These controllable outlets enable power management tasks, including load shedding, load ramping, programming power-on and power-off sequences, and rebooting of locked-up network devices, to be performed remotely. By reducing the frequency of on-site visits, these advanced remote capabilities can save you money and reduce downtime. Unused outlets can be disabled to prevent the connection of unauthorized equipment loads. Each outlet has an LED that illuminates to confirm power on/off status.
Offers Individual Outlet Control from Anywhere
The PDUMH30NET’s all-metal case is designed to endure in demanding work environments. The locking NEMA L5-30P plug and included cord retention brackets for the outlets help prevent the PDU and its connected equipment from becoming accidentally disconnected. Real-time clock backup maintains the time of day and date, even if the PDU is shut down and unpowered.
Versatile Installation Options
The PDUMH30NET mounts in 2U of space in EIA-standard 19-inch 2-post and 4-post racks using the included mounting brackets. You can install the PDU with outlets facing either the front or rear, whichever direction offers better airflow or equipment access. You can also use the mounting brackets to install the PDU on or under a counter.
Upgradable Firmware
To support any future product enhancements, the PDU’s firmware can be manually upgraded.
Why Choose Tripp Lite?
Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, protect, manage, house, cool, connect and mount your equipment. From the largest data center to the smallest home office, Tripp Lite products keep your equipment running effectively and efficiently. Whether you need to supply power to servers and have reliable battery backup, connect high-resolution video sources to displays and digital signs, or organize and secure IT equipment in rack enclosures, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With over 95 years of quality products and service, Tripp Lite is a brand you can trust.
Return Policy |
Time to Return |
Standard Return Policy |
We offer a hassle-free 30-day returns policy for domestic (US) orders, excluding non-refundable items. Refund or Replacement within 30 days of the delivery date. All products that fall under the Standard Return Policy qualify for our 30-Day Hassle-Free Returns. Please see the section above for more details. |
Replacement Only Return Policy |
Replacement within 30 days of the delivery date. |
Manufacturer Only Return Policy |
Covered by the manufacturer's warranty. Please refer to the terms and conditions for the manufacturer's warranty or contact the manufacturer. |
Holiday Extended Return Policies |
Extended Holiday Return Policy.Qualifying purchases of products displaying the " Extended Holiday Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Refund or Replacement until January 31, 2024. Extended Holiday Replacement-Only Return PolicyQualifying purchases of products displaying the " Extended Holiday Replacement-Only Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Replacement until January 31, 2024. |