Tripp Lite PDUMH20HVAT Metered PDU 16/20A 200-240V 1U Horizontal Rackmount C13/C19 Outlets Tripp Lite PDUMH20HVAT Gemeten PDU 16/20A 200-240V 1U Horizontale Rackmontage C13/C19 Stopcontacten
Tripp Lite PDUMH20HVAT Metered PDU 16/20A 200-240V 1U Horizontal Rackmount C13/C19 Outlets Tripp Lite PDUMH20HVAT Gemeten PDU 16/20A 200-240V 1U Horizontale Rackmontage C13/C19 Stopcontacten
Tripp Lite PDUMH20HVAT
- Free Shipping
- 1 Jaar Garantie
- 30 dagen retourneren
- Klimaatneutraal
Product Belangrijkste Kenmerken
- Enkelfasige 16/20A 200-240V Automatische Omschakelschakelaar / ATS PDU
- Biedt een optie voor redundante stroomvoorziening voor netwerkapparaten met één snoer
- Aparte primaire en secundaire ingangen verbinden met twee compatibele stroombronnen
- 1U horizontale rackmontage; 2 C20-ingangen; 8 C13 en 2 C19 uitgangen
- Twee cijferige visuele stroommeter; Upgrade-opties beschikbaar}
Tripp Lite PDUMH20HVAT Metered PDU 16/20A 200-240V 1U Horizontal Rackmount C13/C19 Outlets Tripp Lite PDUMH20HVAT Gemeten PDU 16/20A 200-240V 1U Horizontale Rackmontage C13/C19 Stopcontacten
Tripp Lite PDUMH20HVAT
- Free Shipping
- 1 Jaar Garantie
- 30 dagen retourneren
- Klimaatneutraal
Product Belangrijkste Kenmerken
- Enkelfasige 16/20A 200-240V Automatische Omschakelschakelaar / ATS PDU
- Biedt een optie voor redundante stroomvoorziening voor netwerkapparaten met één snoer
- Aparte primaire en secundaire ingangen verbinden met twee compatibele stroombronnen
- 1U horizontale rackmontage; 2 C20-ingangen; 8 C13 en 2 C19 uitgangen
- Twee cijferige visuele stroommeter; Upgrade-opties beschikbaar}
Tripp Lite
PDUMH20HVAT
De Tripp Lite Metered ATS / Auto Transfer Switch biedt een redundante stroomoptie voor netwerkapparaten met een enkele kabel. Dubbele invoerkabels ondersteunen afzonderlijke aansluiting op PRIMAIRE en SECUNDAIRE stroombronnen. De ATS zal normaal gesproken continue output naar alle stopcontacten handhaven zoals afgeleid van de primaire invoerkabel. Als de primaire stroombron instabiel wordt of volledig uitvalt, schakelt de ATS over naar de secundaire stroombron totdat de primaire invoer is hersteld en stabiel is. De supersnelle overschakeling tussen primaire en secundaire stroombronnen vindt plaats binnen milliseconden. ATS-functionaliteit wordt ondersteund door twee compatibele AC-stroombronnen, ongeacht de fasehoek, om een verscheidenheid aan geavanceerde redundante stroomnetwerktoepassingen te ondersteunen. Hiermee kunnen hot-swappable UPS-bescherming tegen fouten worden ingeschakeld bij gebruik met een enkele UPS en volledig redundante UPS-bescherming wanneer elke kabel is aangesloten op een apart UPS-systeem. In een omgeving met twee UPS'en moet de primaire invoerkabel worden ondersteund door een UPS met continue sinusgolf zonder overschakelingstijd. Tripp Lite SmartOnline-serie wordt sterk aanbevolen voor gebruik als primaire UPS in een toepassing met twee UPS'en. ATS-configuraties met afzonderlijke hoofdcircuits, noodgeneratoren en zelfs afzonderlijke voedingsnetwerken worden volledig ondersteund. De ATS-processor aan boord evalueert voortdurend de stroomkwaliteit op beide invoerbronnen om overschakeling naar de secundaire bron te voorkomen wanneer deze niet beschikbaar is of van lagere kwaliteit is dan de primaire bron. Ledlampjes aan de voorkant geven de beschikbaarheid van primaire of secundaire stroom aan.
.Efficient Single-Phase Monitored Power Distribution with Auto Transfer Switch (ATS)
Featuring a built-in network interface and an auto transfer switch, Tripp Lite's PDUMNH20HVAT 3.3/3.8kW Single-Phase Monitored ATS Power Distribution Unit (PDU) provides full remote power monitoring and a redundant power option for network devices with non-redundant power supply configurations. Dual inputs allow connection to separate primary and secondary power sources for solid-state automatic transfer switching when required to keep equipment running without interruption. Connect the L6-20R output to a single device, or connect to a vertical 20A 208/240V PDU (sold separately) to power additional outlets.
Dual PDU Inputs for Power RedundancyThe PDUMNH20HVAT has two 10 ft. input cords with L6-20P plugs to support connection to separate primary and secondary single-phase power sources, such as separate mains circuits, backup generators and even separate utility power grid feeds. The two power sources provide power redundancy for network devices with non-redundant power supply configurations. The dual power sources enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (primary UPS should produce a sine wave with zero transfer time). The PDUMNH20HVAT has a rugged all-metal housing and provides selectable 208/240V output. Maximum input current is 20A. |
|
Auto Transfer Switch (ATS) for Reliable, Continuous OutputDynamic solid-state (TRIAC) automatic transfer switching is supported by any two compatible AC power sources. The PDUMNH20HVAT supplies continuous output to its L6-20R output from the primary power source. If the primary source fails or becomes unstable, the ATS switches to the secondary power source until the primary source is restored. An on-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when it’s unavailable or of lower quality than the primary source. The transfer between power sources happens in 1 to 5 milliseconds, ensuring uninterrupted operation of connected equipment. |
|
Advanced Network Monitoring Capabilities
A built-in network interface enables full remote access for power monitoring, configuration and control via a secure network or web browser interface. Tiered access privileges allow both an administrator and a guest to log in and monitor the PDU via a web browser. This PDU supports notification of all major power events and user-specified alarm thresholds via email or SNMP traps. Real-time clock backup maintains the time of day and date even if the PDU is shut down and unpowered. When used with an optional ENVIROSENSE environmental sensor module, the PDUMNH20HVAT can also remotely monitor temperature/humidity conditions.
Broad Compatibility
The PDUMNH20HVAT provides 10/100 Mbps auto-sensing for optimal communication compatibility with a current 10/100 Base-T network. Protocols supported include HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, SNMPv3, Telnet, SSH, FTP, DHCP, BOOTP and NTP. DHCP/Manual configuration support provides the ability to have network settings automatically assigned to the card or manually assigned via permanent IP addresses.
Digital Meter and Source Status LEDs for Real-Time Monitoring
The digital meter allows IT personnel to monitor in real time (either locally or remotely) values such as amperage, kilowatts, voltage, frequency and power factor. It helps ensure that the PDU is used at maximum capacity without danger of overload. The meter can also show the IP address. LEDs indicate which source is preferred, which source is available for use and which source is currently being used.
Why Choose Tripp Lite?
Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, protect, manage, house, cool, connect and mount your equipment. From the largest data center to the smallest home office, Tripp Lite products keep your equipment running effectively and efficiently. Whether you need to supply power to servers and have reliable battery backup, connect high-resolution video sources to displays and digital signs, or organize and secure IT equipment in rack enclosures, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With over 95 years of quality products and service, Tripp Lite is a brand you can trust.
Return Policy |
Time to Return |
Standard Return Policy |
We offer a hassle-free 30-day returns policy for domestic (US) orders, excluding non-refundable items. Refund or Replacement within 30 days of the delivery date. All products that fall under the Standard Return Policy qualify for our 30-Day Hassle-Free Returns. Please see the section above for more details. |
Replacement Only Return Policy |
Replacement within 30 days of the delivery date. |
Manufacturer Only Return Policy |
Covered by the manufacturer's warranty. Please refer to the terms and conditions for the manufacturer's warranty or contact the manufacturer. |
Holiday Extended Return Policies |
Extended Holiday Return Policy.Qualifying purchases of products displaying the " Extended Holiday Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Refund or Replacement until January 31, 2024. Extended Holiday Replacement-Only Return PolicyQualifying purchases of products displaying the " Extended Holiday Replacement-Only Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Replacement until January 31, 2024. |