ATEN 2 Port Video Splitter - 250 Mhz (VS102) - Geen retour
ATEN 2 Port Video Splitter - 250 Mhz (VS102) - Geen retour
ATEN VS102
- Free Shipping
- 3 Year Garantie
- 30 dagen retourneren
- Klimaatneutraal
uren
minuten
Verzendinformatie
ATEN 2 Port Video Splitter - 250 Mhz (VS102) - Geen retour
ATEN VS102
- Free Shipping
- 3 Year Garantie
- 30 dagen retourneren
- Klimaatneutraal
uren
minuten
Verzendinformatie
ATEN
VS102
The Video Separator is a signal booster and splitter that is used to take video input from a single source and direct it to two video outputs for monitors using analog signals. The signal boost obtained by using the VS-102 allows you to not only split the signal but to extend the distance. This is no mean feat, your average VGA card, over a standard VGA cable, send a clear VGA signal approximately 25 feet. This makes public broadcasts from a single computer very feasible. If you want to display the same information on many monitors at once, such as in a classroom environment, or at a demonstration, this product performs incredibly well.
Bandwidth is the term that is used to describe the signal capacity of these units. In general, bandwidth is directly proportional to the amount of data transmitted per unit of time. Specifically, in analog signals, bandwidth is the difference between the highest-frequency and the lowest frequency components of a givin signal. For example a voice telephone signal has a bandwidth of 3000 Hz (or 3000 cycles per second), where an analog TV signal has a bandwidth of approximately 6MHz (or 6 million cycles per second) which is approximately 2000 times greater than a simple voice phone call. These units have a bandwidth of 250MHz (which is 250 million cycles per second) and that is almost 42 times greater than a simple TV signal. This huge bandwidth allows for the transmission of large amounts of information at a very high rate of speed, and thus you can use the very high resolution setting of 1600 x 1200 in 24 or 32 bit true color mode at a refresh rate of 70Hz.