케이블 유지 보수

Product Type

판매자

가격

$

상태

17 products
  • Fluke Networks
    The Fluke Networks Pocket Toner NX2DLX KIT-Main is the ultimate cable analyzer for professionals and non-technical users alike. With its easy-to-use interface and compact design, this portable device allows you to test cables with ease, ensuring optimal performance and connectivity. Whether you need to perform open circuit testing, continuity testing, cable testing, or short circuit testing, the Pocket Toner NX2DLX KIT-Main has got you covered. It comes with a range of adapters, including 66 block adapter, RJ-11 adapter, RJ-45 adapter, F-type adapters, RCA adapters, and BNC adapters, making it compatible with various cable types and connectors. Powered by a single AAA battery, this cable analyzer is always ready to go, providing you with the convenience and portability you need. Upgrade your cable testing capabilities with the Fluke Networks Pocket Toner NX2DLX KIT-Main and ensure reliable and efficient connectivity every time.

    Sold out

    $224.93
  • Fluke Networks PTNX2-DLX Pocket Toner NX2DLX KIT-Main, Cable Analyzer with Open Circuit Testing, Continuity Testing, Cable Testing, Short Circuit Testing Add to cart
  • FLUKE ELECTRONICS CORE
    IntelliTone™ MT-8203-20 test leads featuring an insulation-piercing clip on one end and a shrouded, 4-mm right-angle banana plug on the other. The clip features a bed-of-nails for piercing 22-28 AWG wires.

    Sold out

    $80.47
  • Fluke Networks MT-8203-20 IntelliTone Test Leads, Cable Tester Kit with Banana Jack Test Leads and Bed of Nails Add to cart
  • Steren
    Spring Loaded Center-Pin Cutter, Fixed 3-Blade Construction,Strips cable jacket, shield, insulation, Slide Cable Selection and Requires no blade adjustment.

    Sold out

    $21.31
  • Steren 204-200 Coaxial Cable Stripper, Used for RG58, RG59, RG62 and RG6 Add to cart
  • SIMPLY45
    PROSeries Integrated Snagless Strain Relief with RED Locking Pin for all Simply45 Cat6/6a UTP Pass Through & Standard RJ45 Mod Plugs, Commercial Rated UL94 V0. Not for use on Cat5e UTP (See: S45-B001) Clear- 100 pcs Bag

    In stock

    $76.34
    Add to cart
  • SIMPLY45 S45-B002P PRO Cable Strain Relief, Cable Protection, Clear, 100 Pack Add to cart
  • Planar
    The Planar RJ45 Boot- 50 pieces is the perfect solution for protecting your valuable RJ45 cables. With a packaged quantity of 50 pieces, you'll have more than enough to safeguard all your cables. These cable boots are designed to provide durable and long-lasting protection, ensuring that your cables stay in top condition. Installing and removing the cable boots is a breeze, making it easy to manage and organize your cables. Compatible with RJ45 cables, these boots offer strain relief, preventing cable damage and fraying. Whether you're setting up a home network or managing cables in the office, the Planar RJ45 Boot is the ideal choice. Invest in the Planar RJ45 Boot- 50 pieces and keep your cables protected and organized.

    Sold out

    $30.94
  • Planar 551-0507-00 RJ45 Boot- 50 pieces, Cable Protection Add to cart
  • Panduit
    Tool arms allow the installer to pass over cabling which interferes with accessibility. Compatible with copper and fiber patch cords and easily removes them in dense rack installations. Can be used by right or left handed installers.

    Sold out

    $287.33

    $395.53

    Save $108.19
  • Panduit PCRT1 Patch Cord Removal Tool, Easy and Efficient Cable Management Add to cart
  • Black Box
    Our Color-Coded Snagless Pre-Plugs make cable management and identification a snap! Like the RJ-45 cable you already have but want to make it easier to identify? Use ColorCoded Snagless Pre-Plugs. Choose from 11 colors in packs of 50.

    In stock

    $49.46
    Add to cart
  • Black Box FMT735 Snagless Cable Boot - Beige, 50-Pack Add to cart
  • Fluke Networks
    Stop the Buzz. Find Cables Faster with Clear, Precise Toning Clear - Innovative filter technology blocks interference ("buzz") that makes tracing difficult ("F" models only) Precise - SmartTone™ technology provides five distinct tones for exact pair identification Sends loud tone up to 10 miles (16 kilometers) on most cables Loud speaker on probe makes the tone easier to hear through drywall, wood, and other enclosures Angled bed-of-nails clips allow easy access to individual pairs RJ-11 connector is ideal for use on telephone jacks Attach nylon pouch (included in kit) to your belt for easy transport Signal Interference can be caused by multiple sources (I.e. power cables, fans, lighting, etc.) and can make tracing communication cabling almost impossible. The Pro3000F probe utilizes innovative filter technology to obstruct signal interference to make tracing your cable easier, regardless of the work environment. Depending on the region, signal interference may be at 60 Hz, which is most common in North America, or 50 Hz, which is more common in Europe and Asia. For this reason, there are 2 versions of the Pro3000F Filtered Probe. The Pro3000F60, which obstructs 60 Hz signals and its harmonics and the Pro3000F50, which blocks interference at 50 Hz and its harmonics.Technicians can also switch between filtered and unfiltered modes with a simple push of a button. The probe's loud speaker also allows for use in noisy locations and for tracing cable through drywall, wood and other enclosures. The probe also touts an auto-off feature that deactivates the probe after 5 minutes to conserve battery life. The Pro3000F Filtered probe becomes even more useful when paired with the the Pro3000 Tone Generator. The Pro3000 Tone Generator allows for direct connection to unterminated wire using the angle bed of nails clips or terminated RJ-type jacks with the male RJ-11 plug. The tone generators strong tone and SmartTone™ technology allows for precise pair identification up to 10 miles (16 km) away.Pro3000 Analog Tone Generator and SmartTone™Use the SmartTone™ capability of the Pro3000 Tone Generator to identify the right pair. Simply short the selected pair at the near or far end to change the cadence of the tone generated. The tone change you hear through the probe can help you identify the correct wire pair. SmartTone™ provides five distinct tones for exact pair identification.Tone Generator features: SmartTone™ Send tone signal up to 10 miles on most cables Line cord features angled bed-of-nails clips and a rugged RJ-11 plug for direct access to phone and data jacks without adapters External switch allows selection of solid or alternating tone options, indicated with solid or flashing LEDs Continuity Testing Line polarity confirmation Pro3000F Filtered Probe features: Innovative filtered probe obstructs signal of 60 Hz or 50 Hz external interference Switch between filtered and unfiltered modes with one button press. Tone and trace wire on non-active networks Auto-off capability extends battery life Loud probe speaker is audible in noisy locations

    In stock

    $271.7

    $305.22

    Save $33.51
    Add to cart
  • Fluke Networks PRO3000F60-KIT Pro3000F Filtered Probe (60 Hz) and Tone Generator Kit, Cable Signal Testing, Continuity Testing Add to cart
  • Fluke Networks
    Adjustable cable cutter and stripper for round cables, UTP/STP telephone and data cables, and other flexible cables. Fluke Network's cable stripper provides effortless, finger-loop cutting and stripping of flexible cables. It features easily adjustable blade depth to "score" without damaging shielding and conductors. Use it to easily cut and strip round cables, UTP/STP telephone and data cables plus other flexible cables.

    Sold out

    $88.72
  • Fluke Networks 11230002 Round Cable Stripper, Cutting Tool for Stripping and Cutting Add to cart
  • Panduit
    Corrugated loom tubing slit wall, 1.88" (47.8mm) x 100' (30.5m), polyethylene, orange.

    Sold out

    $346.49

    $402.4

    Save $55.91
  • Panduit CLT188F-C3 Cable Protector, 100 ft Length, Orange, Polyethylene Add to cart
  • IDEAL
    The IDEAL 30-071 Cable Protector is the ultimate solution for protecting your cables and ensuring safety in any environment. With its flame-retardant shell, this cable protector provides an extra layer of protection, giving you peace of mind. Its reusable design allows you to use it over and over again, making it a cost-effective choice. Plus, with UL and CSA certifications, you can trust that this cable protector meets the highest quality standards. Don't compromise on safety - choose the IDEAL 30-071 Cable Protector and keep your cables protected with confidence.

    In stock

    $34.19
    Add to cart
  • IDEAL 30-071 Cable Protector - Gray, Flame-Retardant, Reusable Add to cart
  • Black Box
    Our Color-Coded Snagless Pre-Plugs make cable management and identification a snap! Like the RJ-45 cable you already have but want to make it easier to identify? Use ColorCoded Snagless Pre-Plugs. Choose from 11 colors in packs of 50.

    In stock

    $49.46
    Add to cart
  • Black Box FMT736 Snagless Cable Boot - Orange, 50-Pack Add to cart
  • Sold out

    $27.31
  • Black Box FT8200 Coax Easy-Strip Tool - 2-Level, TAA Compliant Add to cart
  • Panduit
    Panduit provides cabinet, rack and cable management systems for data centers, telecommunications equipment rooms, and enterprise cabling applications. This comprehensive product offering addresses power, cooling, space and cable management challenges, enabling reduced energy consumption, enhanced network reliability, and optimized space utilization.

    In stock

    $460.19
    Add to cart
  • Panduit CLT188F-C4 Corrugated Loom Tubing Cable Concealer, 100 ft Length, Yellow Add to cart
  • Tripp Lite
    Gasketed Cable Entry Plate for NEMA-Rated Industrial EnclosuresThis metal-reinforced gland plate covers cable entry and exit cutouts on SmartRack® NEMA 3R and NEMA 4 industrial enclosures, including the SRN and SRIN series. The SRGP3RM is sized to correspond to the enclosures' cable cutouts, making it quick and easy to install. Twenty-one ports accept a wide range of cable sizes, including 3 mm to 7 mm (14), 4 mm to 12 mm (six) and 16 mm to 27 mm (one). Membrane seals around non-terminated cables maintain the enclosure's NEMA 3R or NEMA 4 rating. Unused ports also are protected against dust and moisture.

    In stock

    $71.47

    $89.36

    Save $17.89
    Add to cart
  • Tripp Lite SRGP3RM Cable Entry Plate, Dust and Moisture Resistant, Metal, 21-Port Add to cart
  • Fluke Networks
    The Fluke Networks MS2-TTK Termination Test Kit is the ultimate solution for testing and verifying your network cables. With the MicroScanner2 Cable Verifier and Main Wiremap Adapter, you can easily identify and troubleshoot cable faults, ensuring optimal performance and reliability. The IntelliTone Pro Probe IS60 Pro-Tool Kit provides advanced tone and probe capabilities, allowing you to quickly locate and trace cables in complex network environments. The kit also includes a multi-language Getting Started Guide and User CDs, providing comprehensive instructions and resources for easy setup and operation. With long-lasting batteries and a deluxe Fluke Networks Carry Case, this test kit is portable and convenient for on-the-go professionals. Upgrade your network testing capabilities with the Fluke Networks MS2-TTK Termination Test Kit and ensure the highest quality and performance for your network infrastructure.

    In stock

    $1,559.44

    $1,744.3

    Save $184.85
    Add to cart
  • Fluke Networks MS2-TTK Termination Test Kit, Cable Verifier with IntelliTone Pro Probe, Carry Case Add to cart
  • Fluke Networks
    Analog Tone and Probe is the best choice for toning and tracing wire on non-active networks, and specifi­cally for identifying individual pairs with SmartTone technology. Angled bed-of-nails clips allow easy access to individual wires, and the RJ11 connector is ideal for use on telephone jacks. The large loud speaker on the probe allows to hear through drywall, wood or other enclosures to find wires quickly and easily. Loud tones can be send up to 10 miles (16 kilometers) on most cables. Suitable for any wire identification job.

    In stock

    $189.65

    $211.17

    Save $21.52
    Add to cart
  • Fluke Networks 26000900 Pro3000 Series Analog Tone and Probe, 18 Month Limited Warranty Add to cart