프로젝터 네트워크 어댑터/소프트웨어

판매자

가격

£

상태

42 products
  • Allied Telesis
    The Allied Telesis MMC Series of mini media converters leverages its smaller size to not only help the environment with a small carbon footprint, but also to save space in its working environment. Despite its compact size, the MMC Series delivers all the power and functionality of standard size media converters. Extend Networks The MMC Series are available in 100Mbps or 1000Mbps models. Depending on the model chosen, the fiber-optic port has options for fixed SC, ST, LC or SFP connectors capable of multi-mode or single-mode fiber connectivity. The twisted-pair copper port has an RJ-45 connector supporting either 100Mbps or 1000Mbps, with a maximum operating distance of 100 meters (328 feet). VLAN Support Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send extra-long data packets on the network. The MMC Series are fully compatible with these long packets, enabling them to be used in modern networks. Media converters not supporting this feature discard these extra long packets, making them unsuitable for modern networks. Small and Flexible The smaller size and external power supply of the MMC Series allows them to be used almost anywhere. Smart MissingLink (SML) The Smart MissingLink™ (SML) feature monitors network connections and provides notification when network segments fail, allowing network managers to quickly identify the source and location of failed segments and minimize downtime. Smart Link Restoration Smart Link restoration allows the devices, in cases of power failure, link loss or other interrupted service, to automatically restore the link without the need to restart/reset them. Power Saving The MMC Series continues the Allied Telesis commitment to the environment with over 50% power savings. With just 1.7W of power usage, the MMC Series media converters are some of the most efficient in the market today. Link Test The link test is a fast and easy way for you to test the connections between the media converter ports and the connected end nodes. If a network problem occurs, you can perform a link test to determine which port is experiencing a problem, and focus your troubleshooting efforts on the right cable or end node.

    In stock

    £281.03

    £438.93

    Save £157.9
    Add to cart
  • Allied Telesis AT-MMC2000/SC-960 MMC2000/SC Transceiver/Media Converter, TAA Compliant, Multi-mode Fiber, 10/100/1000Base-T, Gigabit Ethernet Add to cart
  • SEH
    There are many media/fiber converters on the market, FC126 and FC1126, however, are essentially different: Developed in close collaboration with HP, both fiber adapters are specially designed for HP's LaserJet Enterprise range. FC126 and FC1126 are permanently installed on the printer. All connectors are within the printer. This prevents potential eavesdropping and the safety of the fiber optic network is maintained right up to the printer. This built-in adapter maintains all of the printer's features - everything remains as it was. No external power supply. All necessary power is provided by the printer.

    In stock

    £242.57

    £269.87

    Save £27.29
    Add to cart
  • SEH M03932 Fiber Adapter FC126, Fast Ethernet, Multi-mode, 100Base-TX/100Base-FX Add to cart
  • Transition Networks
    The SGPAT10xx-105 is a 10/100/1000Base-T to 1000Base-SX/LX Gigabit Ethernet Media Converter, which easily and affordably facilitates the connection between different types of network cabling, while also injecting PoE+ power through the copper RJ-45 port. Being a Power Sourcing Equipment (PSE) device, the SGPAT media converter combines data received over a fiber optic link with 56VDC input power to provide power and data to a Powered Device (PD) over twisted pair cabling while complying with the IEEE 802.3at PoE+ standard, which is also backwards compatible with the IEEE 802.3af PoE standard. The converter is available in 2-port, 3-port, and 4-port versions and includes PD signature sensing and power monitoring features. Other features include over-current protection, under-current protection, and fault protection input. Active Link Pass Through (ALPT) is supported, which is an automatically activated version of Link Pass Through (LPT) that allows the converter to detect the loss of Receive (Rx) signals on either fiber or copper port and propagate the failure to the end devices, preventing the media converter from isolating those link failures. During a Link Pass Through event, the Auto Power Reset feature will re-set the power to the end PD device, ensuring it is ready to go when the LPT event is corrected.

    In stock

    £368.57

    £486.68

    Save £118.11
    Add to cart
  • Transition Networks SGPAT1040-105-NA Transceiver/Media Converter, 10/100/1000 POE+ RJ45 DUAL SPEED SFP Add to cart
  • Transition Networks
    The Transition Networks 10/100/1000BTX RJ45 POE TO PERP (SPOEB1013-105-NA) is a versatile and reliable solution for extending network connectivity. With its stand-alone Fast Ethernet PoE Media Converter, this device allows you to connect and power your network devices seamlessly. Whether you need to extend your network to remote locations or power IP cameras and wireless access points, this media converter has got you covered. With its compact and wall-mountable design, the Transition Networks Media Converter can be easily installed in any environment. It supports both multi-mode fiber and twisted pair media, providing flexibility in connecting different types of devices. The duplex SC port ensures a secure and reliable connection, while the included power supply makes installation hassle-free. Not only is this media converter practical, but it is also environmentally friendly with WEEE and RoHS certifications. It is designed to meet the latest industry standards, ensuring optimal performance and compatibility. Plus, with a lifetime limited warranty, you can have peace of mind knowing that your investment is protected. Upgrade your network connectivity with the Transition Networks 10/100/1000BTX RJ45 POE TO PERP (SPOEB1013-105-NA). It's the perfect solution for businesses, organizations, and individuals looking to extend their network reach and power their devices efficiently. Don't settle for less when it comes to your network infrastructure. Choose the Transition Networks Media Converter and experience reliable and seamless connectivity like never before.

    In stock

    £232.31

    £295.31

    Save £63
    Add to cart
  • Transition Networks SPOEB1013-105-NA Stand-alone Fast Ethernet PoE Media Converter, Multi-mode, 1.24 Mile Distance Add to cart
  • Perle
    Perle's line of feature rich 10/100/1000 SFP Media Converters transparently connects copper to SFP for multimode or single mode fiber. Our 10/100/1000 Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network, the life of non-fiber based equipment, or the distance between two devices. The pluggable fiber optics port allows for flexible network configurations using SFP transceivers supplied by Perle, Cisco or other manufacturers of MSA compliant SFPs.

    In stock

    £261.39

    £319.48

    Save £58.09
    Add to cart
  • Perle 05050184 S-1000-SFP Gigabit Ethernet Managed Media Converter, Lifetime Warranty, Canada Origin, REACH/WEEE/RoHS Certified Add to cart
  • Transition Networks
    The Transition Networks Mini Fast Ethernet Media Converter is the perfect solution for extending your network connectivity. With its compact design and multiple mounting options, it can fit seamlessly into any environment. This media converter is not only environmentally friendly, but it also comes with a lifetime limited warranty for added peace of mind. Featuring both twisted pair and optical fiber media support, this converter offers flexibility in connecting different devices. Its fast Ethernet technology ensures high-speed data transfer, while the multi-mode fiber mode support allows for versatile connectivity options. With its 10/100Base-TX and 100Base-FX network technology, this media converter can easily connect to various network devices. It also supports a maximum distance of 1.2 miles, making it ideal for extending network reach. Installation is a breeze with its 1 SC port and 1 RJ-45 network port. Simply connect your devices and enjoy seamless network connectivity. And with an input voltage of 12V DC, you can rely on a stable power supply. Upgrade your network with the Transition Networks Mini Fast Ethernet Media Converter and experience reliable and efficient connectivity like never before.

    In stock

    £102.15

    £114.12

    Save £11.98
    Add to cart
  • Transition Networks M/E-TX-FX-01(SC)-NA Mini Fast Ethernet Media Converter, Multi-mode, 2KM Range Add to cart
  • Transition Networks
    Fiber Integration Used in pairs or as a single unit, this mini media converter will ease the integration of fiber optic cabling into copper-rich Fast Ethernet environmentsExtend Network Distance Fiber supports the transmission of Fast Ethernet data over much longer distances than is possible twisted pairLow-Latency Design As a layer-1 design, this Mini converter will retransmit Fast Ethernet signals without any store-and-forward packet inspection delays found in other layer-2 devices

    In stock

    £102.15

    £114.12

    Save £11.98
    Add to cart
  • Transition Networks M/E-TX-FX-01-NA Mini Fast Ethernet Media Converter, 10/100Base-TX to 100Base-FX, Multi-mode, 1.24 Mile Add to cart
  • Transition Networks
    The E-100BTX-FX-06 is a stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 100Base-TX copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential.

    In stock

    £193.86

    £252.69

    Save £58.83
    Add to cart
  • Transition Networks E-100BTX-FX-06(LC)-NA Stand-alone Fast Ethernet Media Converter 100Base-TX to 100Base-FX, Multi-mode, 1.24 Mile Maximum Distance Supported Add to cart
  • TP-Link
    The MC200CM is a media converter designed to convert 1000BASE-FX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-FX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. It works at 850nm on both transmitting and receiving data.

    In stock

    £33.95
    Add to cart
  • TP-Link MC200CM Gigabit Ethernet Media Converter, Fiber to RJ45 Converter - Black Add to cart
  • TRENDnet
    TRENDnet's Gigabit PoE PD SFP Fiber Media Converter, model TFC-PGSFP, converts 100/1000BASE-T copper Ethernet to 1000BASE-SX/LX Fiber SFP media and vice versa. The TFC-PGSFP is conveniently powered via PoE switch or injector, no power adapter is required. It features one gigabit PoE input port for power and data, plus one SFP slot that supports both multimode (SX) or single-mode (LX) SFP modules. The SFP slot accommodates both Fast Ethernet and Gigabit SFP modules providing further installation flexibility. NDAA / TAA compliant (U.S. and Canada only)Dual Speed SFP SlotDual-speed SFP slot supports both 100Mbps and 1000Mbps SFP modules for multimode or single-mode fiber applications.PoE PoweredNo power adapter required-this fiber SFP converter is powered via an 802.3af/at PoE switch or injector at distances up to 100m (328 ft.).CompactSmall and compact metal housing design provides greater installation flexibility.PACKAGE CONTENTSTFC-PGSFPQuick Installation Guide More from the Manufacturer

    In stock

    £57.15
    Add to cart
  • TRENDnet TFC-PGSFP Gigabit PoE PD SFP Fiber Media Converter, Compact Design Add to cart
  • Transition Networks
    The E-100BTX-FX-06 is a stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 100Base-TX copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential.

    In stock

    £163.21

    £211.48

    Save £48.27
    Add to cart
  • Transition Networks E-100BTX-FX-06(SC)-NA Stand-alone Fast Ethernet Media Converter 100Base-TX to 100Base-FX, Multi-mode, 1.24 Mile Reach Add to cart
  • Transition Networks
    The SGFEB provides a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment. Deploying fiber into today's networks provides the ability to transmit data over significantly longer distances than is possible on copper. Fiber also protects your data from external sources of noise and interference, improving network performance.

    In stock

    £494.04

    £657.38

    Save £163.34
    Add to cart
  • Transition Networks SGFEB1019-130-NA SGFEB1019-130 Transceiver/Media Converter, 10/100/1000B-T TO 1000BASE-LX, Single-mode, 6.21 Mile Add to cart
  • SIIG
    Connects your VGA-equipped computer to an HDMI display, projector or home theater system Supports 1080p and PC resolution up to 1280x1024@60Hz Supports high quality USB audio Low power consumption. Powered directly from the USB bus Compact & portable for business travelers

    In stock

    £41.6
    Add to cart
  • SIIG CE-VG0U11-S1 Portable VGA & USB Audio to HDMI Converter, Supports 1080p, Compact & Portable Add to cart
  • Transition Networks
    The M/GE-T Series is a Gigabit Ethernet stand-alone Mini media converter that provides cost effective, entry-level media conversion between 1000Base-T ports and 1000Base-SX/LX ports. With its fixed configuration, deployments are just plug-and-play, and with its small size, it is ideal for locations where space is limited. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential.

    In stock

    £217.21

    £275.3

    Save £58.09
    Add to cart
  • Transition Networks M/GE-T-SX-01(LC)-NA Mini Gigabit Ethernet Media Converter, 1000Base-T RJ-45 to 1000Base-SX MM LC, Lifetime Warranty Add to cart
  • Transition Networks
    The M/GE-PSW Series is a Gigabit Ethernet stand-alone Mini media converter that provides cost effective, entry-level media conversion between 10/100/1000Base-T ports and 1000Base-SX/LX ports. With its fixed configuration, deployments are just plug-and-play, and with its small size, it is ideal for locations where space is limited. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber.

    In stock

    £263.85

    £338.3

    Save £74.45
    Add to cart
  • Transition Networks M/GE-PSW-SX-01(LC)NA Mini Gigabit Ethernet Media Converter, Multi-mode, 1000Base-SX, 10/100/1000B-T to 1000B-SX LC MM Add to cart
  • StarTech.com
    The ET91000SC2 1000 Mbps Gigabit Multimode Fiber Media Converter (SC, 550m) lets you extend a Gigabit Ethernet network over multimode fiber, at distances up to 550m (1804 ft). A cost-effective solution for connecting a Gigabit Ethernet (1000Base-T) network to remote network segments over a (1000Base-SX) fiber backbone, the GbE to MM fiber converter supports full Gigabit speeds for ideal network performance and scalability. Designed to offer a durable and convenient Ethernet to fiber solution, this Ethernet to SC Fiber converter features an all-steel chassis, and a simple plug-and-play installation with minimal configuration required. For added versatility, the fiber media converter supports standalone operation, or installation into the 20 Slot, 2U Rackmount Chassis (ETCHS2U). Backed by a StarTech.com 2-year warranty and free lifetime technical support. More from the Manufacturer

    In stock

    £180.39
    Add to cart
  • StarTech.com ET91000SC2 Gigabit Ethernet Multi Mode Fiber Media Converter SC 550m - 1000 Mbps, Reliable Network Connectivity for Long Distances Add to cart
  • Tripp Lite
    Tripp Lite's N785-001-SC-MM 10/100/1000 to Multimode Media Converter ( RJ45 to SC ) is an economical way to extend the distance of network nodes up to 550 Meters by converting Cat5e UTP cables to Multimode Fiber Optic. The Media Converter features automatic MDI/MDI-X configuration, and the UTP port senses the network speed automatically. Auto-detects half or full duplex operation on the fiber port. Power supplied by small form factor AC adapter.

    In stock

    £84.15

    £144.69

    Save £60.54
    Add to cart
  • Tripp Lite N785-001-SC-MM 10/100/1000 SC Multimode Media Converter, 550M, 850nm, 2-Year Warranty Add to cart
  • Tripp Lite
    Extends your copper Gigabit Ethernet network connection up to 2 km (1.2 mi.) over SC fiber optic cable with the addition of PoE. Extends power (48 VDC) + data (1000 Mbps) to any edge PoE+ device Supports multimode fiber optic cable with SC connectors up to 2 km (1.2 mi.) RJ45 jack supports auto-MDI/MDIZ to bridge various network devices Supports both full- and half-duplex operation Works in tandem with Tripp Lite N785-001-SC (sold separately)

    In stock

    £133.76

    £204.12

    Save £70.36
    Add to cart
  • Tripp Lite N785-P01-SC-MM2 Transceiver/Media Converter, Multi-mode, 1.24 Mile Range, Gigabit Ethernet Add to cart
  • Tripp Lite
    Extends Power and Data to a PoE+ Device up to 550 Meters via SC Multimode Fiber Cable This economical unit converts a multimode fiber optical signal to a copper Ethernet signal that extends both power (48 VDC) and 10/100/1000 Mbps Gigabit Ethernet to a PoE+ (Power over Ethernet) device. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-SC-MM1 with multimode fiber cable to reach greater distances. This could include providing both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices. Supports Power over Ethernet to Save You Money and Give You More Installation Choices PoE saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings. Supports Auto-Sensing of Network Speed and Other Advanced Functions Monitoring and controlling your network nodes is easy with the N785-P01-SC-MM1's advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDIZ configuration. Six LEDs indicate the converter's power, PoE, Ethernet network and fiber link statuses at a glance. Link fault pass through (LFP) monitors both the SC and RJ45 ports to ensure link status remains active. Works in Tandem with Tripp Lite's N785-001-SC-MM Media Converter This media converter connects to the N785-001-SC-MM using multimode fiber optic cabling with SC ends (such as Tripp Lite's N520-Series, sold separately) to extend an Ethernet network connection up to 550 meters. Use Cat5e/6 cabling (such as Tripp Lite's N001- or N201-Series cables) to deliver data and power to a 10/100/1000 Mbps PoE device up to 100 meters (328 feet) from the N785-P01-SC-MM1. Completely Plug-and-Play with No Additional Software Required for Connection The compact metal converter is easy to install and set up with no software or drivers required. The included power supply connects to a convenient AC outlet with no computer or other signal source needed.

    In stock

    £126.4

    £162.39

    Save £36
    Add to cart
  • Tripp Lite N785-P01-SC-MM1 Transceiver/Media Converter, Multi-mode, 1000Base-X, Gigabit Ethernet, 1804.46 ft Range Add to cart
  • TRENDnet
    Functions as a standalone converter 10/100/1000 Mbps Auto-MDIX Gigabit port 100/1000 Mbps SC-type multi-mode fiber port Fiber networking over distances of up to 550 m (1800 ft.) 2 Gbps switching capacity LEDs convey power and copper / fiber link and activity 3 Year TRENDnet Manufacturer's Warranty NDAA / TAA compliant (U.S. and Canada only) TRENDnet's TFC-GMSC, Gigabit Fiber Converter, is a Multi-Mode SC-Type fiber converter that converts 10/100/1000 Mbps ethernet to 100/1000 Mbps Fiber and spans distances up to 550 m (1,800 ft.). Ports include a 1000Base-T (RJ-45) port and a 1000Base-SX (SC-Type) fiber port.Building-to-BuildingWell suited for corporate interbuilding and intrabuilding backbones where fiber networking over longer distances is required.Standalone ConverterA durable metal enclosure with included power adapter supports standalone converter installations.CompactSmall and compact metal housing design provides greater installation flexibility.PACKAGE CONTENTS TFC-GMSC Quick Installation Guide Power Adapter (5V DC, 1A) More from the Manufacturer

    In stock

    £68.31
    Add to cart
  • TRENDnet TFC-GMSC 1000Base-T to 1000Base-SX Multi-Mode SC Fiber Converter, Gigabit Fiber Converter, Up to 550m Distance Add to cart
  • Black Box
    Ultra compact, weighing only 2.5 ounces.SFP port supports 100BASE-FX using 155-Mbps SFP transceivers.UTP port supports 10/100/1000BASE-T.Supports Jumbo Ethernet frames up to 10,240 bytes.LED indicators for power, UTP, and fiber status.Bring fiber to the desktop conveniently and cost-effectively. The Micro Mini Media Converter is ideal for bringing fiber to the desktop and for mobile applications where light weight, compact size, and low power requirements are critical. Weighing only 2.5 ounces and about the length of a house key, this ultra-compact media converter is portable yet powerful. For extra versatility, it can be USB-powered, making it easy to provide fiber connectivity to locations where AC or DC power is unavailable, for instance, field-deployed fiber-to-the-laptop. For easy portability, this tiny converter conveniently slips into a pocket or laptop carrying case. The converter is plug-and-play with an RJ-45 port that autonegotiates for speed, duplex mode, and crossover functions for PCs with 10BASE-T, 100BASE-TX, and 1000BASE-T Ethernet. On the fiber side, the converter accepts SFPs for connection to a variety of Fast Ethernet fiber types. Use it with Black Box 155-Mbps SFPs (LFP401-LFP404) or any other standard 155-Mbps SFP. Because it can be powered through a computer's USB 1.0 or 2.0 port, the Micro Mini Media Converter is ideal for connections to fiber in areas where a spare power outlet may not be available. When plugged into a computer's USB port, the media converter shuts down automatically when you turn off the computer, which saves energy.

    In stock

    £179.87

    £216.39

    Save £36.52
    Add to cart
  • Black Box LMC400A Micro Mini Transceiver/Media Converter, 10/100/1000Base-TX, 100Base-FX, Gigabit Ethernet, Fast Ethernet Add to cart
  • TRENDnet
    This compact fiber media converter transforms 1000BASE-T (Copper Gigabit) media to 1000BASE-SX/LX (Fiber) SFP media and vice versa. The 1000BASE-T RJ-45 port supports a full-duplex Gigabit connection at wire speed. The SFP slot supports both multimode (SX) or single-mode (LX) SFP modules. NDAA / TAA compliant (U.S. and Canada only)Dual-Speed SFP SlotDual-speed SFP slot supports both 100 Mbps and 1000 Mbps SFP modules.Power AdapterIncluded power adapter for standalone use.CompactSmall and compact metal housing design provides greater installation flexibility.PACKAGE CONTENTS TFC-GSFP Quick Installation Guide Power Adapter (5V DC, 1A) More from the Manufacturer

    In stock

    £47.85
    Add to cart
  • TRENDnet TFC-GSFP 1000BASE-T to SFP Fiber Media Converter, Gigabit Ethernet to SFP Media Converter, 4Gbps Switching Capacity Add to cart
  • SIIG
    Extends 4K@60Hz HDMI signals up to 230ft with zero latency, IR, HDR, audio extraction, and ARC using industry leading ipcolor video transmission technology; receives HDMI signals from ipcolor 4K HDMI 2.0 Extender Daisy Chain Transmission Kit, part number CE-H26M11-S1, sold separately, supports daisy chain connection for additional extension and displays 4K HDMI Extension - Extends UHD 4K@60Hz HDMI signals up to 230ft/70m from a source device to an HDMI display via Cat6/6a/7 cable Advanced ipcolor Transmission Technology - ipcolor is a global leading innovative technology for ultra high definition video digital transmission and connectivity, it can extend and transmit uncompressed 4K@60Hz YUV 4:4:4 video + audio, including HDR, with zero latency Daisy Chain Extension - Supports daisy chain connection of up to 10 transceivers to further extend HDMI signal up to 165ft to each transceiver Note: Requires ipcolor 4K HDMI 2.0 Extender Daisy Chain Transmission Kit, part# CE-H26M11-S1, sold separately Audio Extraction - Extracts and routes digital audio from the HDMI signal through the transceiver's digital Toslink port, supports PCM, Dolby 5.1, DTS 5.1 audio output signal ARC - Connects through the Toslink optical port of the transceiver to the display's ARC sink IR Control - Built-in bi-directional IR provides full remote control capabilities, control the HDMI source device at the remote display location and vice versa, IR blaster and receiver cables included Auto EDID and Downscaling - The lowest EDID capability of the connected display(s) controls the resolution output to the display(s) Protection - Lightning Protection, Surge Protection, ESD protection High Quality Construction - High quality metal housing with ventilation panels improve heat dissipation and ensure system stability during long hours of operationEasy Installation - Plug and play installation, no driver installation required Compatibility Notes: Does not work with routers and switches Requires ipcolor 4K HDMI 2.0 Extender Daisy Chain Transmission Kit, part# CE-H26M11-S1, for daisy chain connection, sold separately

    In stock

    £74.85

    £97.76

    Save £22.91
    Add to cart
  • SIIG CE-H26N11-S1 ipcolor 4K HDMI 2.0 Extender Daisy Chain Transceiver, 4K UHD Video, 2 Year Warranty, Twisted Pair, 230 ft Operating Distance Add to cart
  • Black Box
    Operates in half- or full-duplex over two or four wires. Works with or without transmit "echo." Also available in four other configurations. See Similar Products. The Async RS-232 to RS-485 Interface Bidirectional Converter, DB9 Female to DB9 Female, features a DB9 female connector on the RS-232 side, and a DB9 female on the RS-485 side. It converts your unbalanced RS-232 signals to balanced half-duplex RS-485 signals.

    In stock

    £120.96

    £128.85

    Save £7.89
    Add to cart
  • Black Box IC1625A-F Async RS-232 to RS-485 Interface Converter, 2 Ports, 4000 ft Maximum Distance Supported Add to cart
  • B+B SmartWorx
    To attach the ADAM-4561/4562 to a PC, you don't need to open the chassis or power down your PC. Instantly get one or two extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. Thismakes the ADAM-4561/4562 especially suitable for modems, printers, POS systems and industrial control devices.

    In stock

    £134.05

    £147.14

    Save £13.09
    Add to cart
  • B+B SmartWorx ADAM-4561-CE 1-port Isolated USB to RS-232/422/485 Converter, 2-Year Warranty, RoHS Certified Add to cart
  • Black Box
    This compact opto-isolator enables you to attach an RS-232 device to a USB port and gain isolation from voltage spikes and ground loops. It doesn't require PCI or ISA slots, or IRQs. Using an optional USB Type A - Type B cable, simply plug the opto-isolator into the USB port and Windows will configure the device as an additional COM port.

    In stock

    £171.39

    £206.05

    Save £34.66
    Add to cart
  • Black Box SP385A-R3 USB to RS232 Opto-Isolated Converter, 5-Year Warranty, TAA Compliant Add to cart
  • B+B SmartWorx
    Model BB-FOSTCDRI is a premium industrial serial to multi-mode fiber optic converter. Its rugged design is UL Approved and certified for Class 1/Division 2 industrial environments. It extends data communications up to 4 km (2.5 mi). It provides three-way optical isolation on the input, output and power lines.In addition to direct point-to-point connectivity, it is capable of operating in a multi-drop mode. This allows one serial device to communicate with up to 31 other devices around a fiber ring. Since it supports mixed standards, you can replace other converters and isolators and add the EMI / RFI protection inherent to fiber optic communications.In RS-232 mode, the converter supports Transmit and Receive data. Handshaking signals are not passed through. An Automatic Send Data Control circuit controls the RS-422/485 driver chip, eliminating the requirement for external software.Easy to install and configure, it has a 12-position DIP switch on the bottom to configure RS-422/485 parameters. Serial data and power cables connect to removable terminal blocks. ST connectors are used for the fiber.A 10-30 VDC external power source is required (power supply not included, sold separately).Model BB-FOSTCDRI-INV features an "inverted fiber state" and is suitable for applications requiring the fiber optic transmit light to be Off in the idle state.

    In stock

    £276.12

    £284.72

    Save £8.6
    Add to cart
  • B+B SmartWorx BB-FOSTCDRI-INV Industrial Serial to Fiber Optic Converters, Multi-mode, 2.49 Mile Distance Supported Add to cart
  • AddOn
    This is a mini media converter that converts a 10/100/1000Base-TX(RJ-45) to 1000Base-LX(ST) via a 1310nm single-mode fiber (SMF) ST connector, which allows distance reach up to 20km. This provides a cost effective conversion from 10/100/1000Base-TX(RJ-45) to 100Base-LX fiber, while extending the network reach beyond the 100m reach limitation of copper and saving space (3.75" x 2.25" x 1"). Our media converters are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs.

    In stock

    £81.69

    £113.31

    Save £31.61
    Add to cart
  • AddOn ADD-GMCMN-LX-2ST Transceiver/Media Converter, 10/100/1000Base-TX(RJ-45) to 1000Base-LX(ST) SMF 1310nm 20km Mini Media Converter Add to cart
  • Tripp Lite
    Features | Extends a Network Connection up to 30 km over SC Singlemode Fiber Optic Cable This network media converter converts a copper Ethernet signal to a singlemode fiber optic signal and extends it to a second network device up to 30 kilometers (18.6 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-SCSM with singlemode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. Monitor Your Installation with Link Fault Signaling and Loop Back FunctionsDetermine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off. LEDs Indicate Installation Performance and Diagnostic FunctionsEasy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. Protective Metal Housing Built to Withstand a Variety of HazardsThe hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting. Works in Tandem with Tripp Lite's N785-CH12 ChassisHouse and power up to 12 Tripp Lite media converters, including the N784-H01-SCSM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation. TAA-Compliant for GSA Schedule PurchasesThe N784-H01-SCSM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

    In stock

    £133.24

    £197.13

    Save £63.9
    Add to cart
  • Tripp Lite N784-H01-SCSM Transceiver/Media Converter, Hardened Copper to Fiber, Single-mode, 10/100Base-TX, 100Base-FX, Fast Ethernet, TAA Compliant Add to cart
  • Transition Networks
    The SGPAT10xx-105 is a 10/100/1000Base-T to 1000Base-SX/LX Gigabit Ethernet Media Converter, which easily and affordably facilitates the connection between different types of network cabling, while also injecting PoE+ power through the copper RJ-45 port. Being a Power Sourcing Equipment (PSE) device, the SGPAT media converter combines data received over a fiber optic link with 56VDC input power to provide power and data to a Powered Device (PD) over twisted pair cabling while complying with the IEEE 802.3at PoE+ standard, which is also backwards compatible with the IEEE 802.3af PoE standard. The converter is available in 2-port, 3-port, and 4-port versions and includes PD signature sensing and power monitoring features. Other features include over-current protection, under-current protection, and fault protection input. Active Link Pass Through (ALPT) is supported, which is an automatically activated version of Link Pass Through (LPT) that allows the converter to detect the loss of Receive (Rx) signals on either fiber or copper port and propagate the failure to the end devices, preventing the media converter from isolating those link failures. During a Link Pass Through event, the Auto Power Reset feature will re-set the power to the end PD device, ensuring it is ready to go when the LPT event is corrected.

    In stock

    £393.49
    Add to cart
  • Transition Networks SGPAT1013-105-NA Transceiver/Media Converter, 10/100/1000 POE+ RJ-45 to 1000BASE-SX MM SC Add to cart
  • Black Box
    Supports 2048 MAC addresses and features a 384 KB buffer memory. The Auto MDI/MDI-X copper port autonegotiates for 10-/100-Mbps speed and autodetects full-or half-duplex mode. The Mini Industrial Media Converter can be installed easily on a DIN rail. Mounting kit included.

    In stock

    £164.85

    £179.99

    Save £15.14
    Add to cart
  • Black Box LMC270A-MM-SC Hardened Mini Industrial Media Converter, Fast Ethernet, 100Base-X, Multi-mode, 1.24 Mile Add to cart
  • Black Box
    The BLACK BOX® Universal RS-232 to RS-422/485 Converter with Opto-Isolation isolates and converts RS-232 signals into RS-422/RS-485 signals and vice versa. Unlike other converters, external software is not required to control data flow. The RS-232 input is wired for DCE through a DB9 female connector, and RS-422/RS-485 signals are interfaced through a removable terminal block. To supply external power to the terminal block, you need our 120-VAC/12-VDC Wallmount Power Supply (PS1003). For RS-232, the connection requires RD, TD, and Signal Ground. In RS-422 mode, the driver is always enabled for full-duplex communications. A twisted pair is required for transmit, and a twisted pair is also required to receive. A ground reference wire is also needed. Switch settings are Switch 1: RS-422; Switch 2: Echo On; Switches 3 and 4: 4 Wire. In both RS-485 modes, the RS-485 driver is automatically enabled during each space state by the presence of an RS-232 signal. When the RS-232 data is in a mark or idle state, the RS-485 driver is disabled and the RS-485 data lines are held in a mark state by the bias provided by a 4.7-ohm resistor; the value of this resistor may need to be changed, depending on the termination you use. To connect to several RS-485 devices with minimal wire, select the unit's 2-wire, half-duplex RS-485 mode. When data is requested, the addressed device transmits and then reverts back to receive status. Switch settings for this mode are Switch 1: RS-485; Switch 2: Echo Off; Switches 3 and 4: 2 Wire. For 4-wire master/slave circuits, select the unit's 4-wire, full-duplex RS-485 mode. In this mode, addressed devices can receive data while transmitting data from a previous request. When used as a master in a single-master system, Switch 1 may be selected because the unit is the only transmitter in the system. When used as an RS-485 slave, the RS-232 device must provide addressability. Biasing in a master/slave system is provided by the end-of-line slave. Switch settings for this mode are Switch 1: RS-485; Switch 2: Echo On; Switches 3 and 4: 4 Wire.

    In stock

    £137.85

    £163.51

    Save £25.66
    Add to cart
  • Black Box IC821A Universal RS-232 to RS-422/485 Converter, Opto-Isolation, 2 Ports Add to cart
  • Transition Networks
    The SGPAT10xx-105 is a 10/100/1000Base-T to 1000Base-SX/LX Gigabit Ethernet Media Converter, which easily and affordably facilitates the connection between different types of network cabling, while also injecting PoE+ power through the copper RJ-45 port. Being a Power Sourcing Equipment (PSE) device, the SGPAT media converter combines data received over a fiber optic link with 56VDC input power to provide power and data to a Powered Device (PD) over twisted pair cabling while complying with the IEEE 802.3at PoE+ standard, which is also backwards compatible with the IEEE 802.3af PoE standard. The converter is available in 2-port, 3-port, and 4-port versions and includes PD signature sensing and power monitoring features. Other features include over-current protection, under-current protection, and fault protection input. Active Link Pass Through (ALPT) is supported, which is an automatically activated version of Link Pass Through (LPT) that allows the converter to detect the loss of Receive (Rx) signals on either fiber or copper port and propagate the failure to the end devices, preventing the media converter from isolating those link failures. During a Link Pass Through event, the Auto Power Reset feature will re-set the power to the end PD device, ensuring it is ready to go when the LPT event is corrected.

    In stock

    £404.57

    £529.75

    Save £125.18
    Add to cart
  • Transition Networks SGPAT1039-105-EU SGPAT1039-105 Transceiver/Media Converter, 10/100/1000 POE+ RJ-45 to 1000BASE-SX MM LC Add to cart
  • Tripp Lite
    Extends your copper Gigabit Ethernet network connection up to 20 km (12.4 mi.) over SC fiber optic cable with the addition of PoE. Extends power (48 VDC) + data (1000 Mbps) to any edge PoE+ device Supports singlemode fiber optic cable with SC connectors up to 20 km (12.4 mi.) RJ45 jack supports auto-MDI/MDIZ to bridge various network devices Supports both full- and half-duplex operation Works in tandem with Tripp Lite N785-INT-SC-SM (sold separately)

    In stock

    £145.21

    £219.22

    Save £74.01
    Add to cart
  • Tripp Lite N785-P01-SC-SM1 Transceiver/Media Converter, Single-mode, 1000Base-X, Gigabit Ethernet, 12.43 Mile Add to cart
  • Axiom
    FeaturesThe Axiom Mini Mini 10Gbs Ethernet Media Converter series, is a 10Gigabit Ethernet stand-alone Mini unmanaged media converter that provides cost effective, entry-level media conversion between Copper RJ45 10GBASE-TX ports and 10GBase-FX fiber optic ports. Available with an open SFP port or pre-configured with an optical transceiver to fit your environment, deployments can be just plug-and-play or are fully customizable with the transceiver of your choice. With its small size, it is ideal for locations where space is limited. Choose from Multimode or Single-mode fiber connections to meet the distance requirements of your network. Unit and Port LEDs allow for quick status information Jumbo Frame Support Transparent transport and very low delay Support for ITUT prescribed DWDM/CWDM wavelength Loopback test function support Hot-Swappable into your existing network Support 1U Rack (12 channel) and standalone use Compact package size Easy installation

    In stock

    £1,966.71

    £5,455.02

    Save £3,488.31
    Add to cart
  • Axiom Transceiver/Media Converter (AXG99356) Add to cart
  • Transition Networks
    Fiber Integration Used in pairs or as a single unit, this mini media converter will ease the integration of fiber optic cabling into copper-rich Fast Ethernet environmentsExtend Network Distance Fiber supports the transmission of Fast Ethernet data over much longer distances than is possible twisted pairLow-Latency Design As a layer-1 design, this Mini converter will retransmit Fast Ethernet signals without any store-and-forward packet inspection delays found in other layer-2 devices

    In stock

    £115.76
    Add to cart
  • Transition Networks MINI 100BASETX TO 100BASEX SFP (M/E-TX-FX-01(SFP)-NA) Add to cart
  • Transition Networks
    The SISTG10xx-211-LRT-B Series is a new generation of unmanaged hardened Gigabit Ethernet media converter. The converter can provide multimode or single mode fiber connections with fixed SC connectors for extending the Ethernet service distance over fiber. The converter also has a SFP version that provides the ultimate flexibility to choose the appropriate SFP module to match your communication and distance needs. It has redundant input power connections to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks' hardened switches are certified with UL Class 1 Division 2 to operate reliably in hazardous locations such as Oil & Gas, manufacturing, and the chemical industry.

    In stock

    £359.86

    £468.68

    Save £108.81
    Add to cart
  • Transition Networks IND MEDIA CONVRT 10/100/1000BASE-T (SISTG1014-211-LRT-B) Add to cart
  • Axiom
    The Axiom Mini 10/100/1000Base-TX to 100/1000Base-FX Media Converter Series is a Gigabit Ethernet stand-alone Mini unmanaged media converter that provides cost effective, entry-level media conversion between Copper RJ45 10/100/1000Base-TX ports and 100/1000Base-FX fiber optic ports. Available with an open SFP port or its fixed connector configuration, deployments can be just plug-and-play or are fully customizable with the transceiver of your choice. With its small size, it is ideal for locations where space is limited. Choose from Multimode or Single-mode fiber connections to meet the distance requirements of your network. Unit and Port LEDs allow for quick status information Auto-Negotiation Full-Duplex or Half-Duplex Operation Modes Auto-MDI/MDIX Automatic Link Restoration Connect to legacy network equipment Eliminate Collision Domains 10/100/1000Base-TX UTP to 1000Base-FX Fiber media convertion Supports IEEE802.3U IEEE802.3z 1000Base-TX/FX protocols , IEEE802.3ab standards Available with Open SFP Port or optional built in LC/SC/ST Connections DIP switch to set different configurations Compact package size Supports IEEE802.3x flow control; 100Base-FX interface; auto MDI-MDIX function; LFP function

    In stock

    £117.69

    £300.96

    Save £183.27
    Add to cart
  • Axiom (AXG99290) Transceivers/Media Converters Add to cart
  • ComNet
    The ComNet FDX60(M,S)[-M] data transceivers provide point-to-point transmission of simplex or duplex EIA RS232/RS422/RS485 (2W/4W) data signals over one or two optical fibers. The transceivers are transparent to data encoding allowing for broad-range compatibility. Models within this series are available for use with multimode or single mode optical fiber. Features for FDX60 Series Robust design assures extremely high reliability in unconditioned out-of-plant/roadside environments NTCIP compatible Wide optical dynamic range: optical attenuators are never required Status indicating LEDs provide rapid indication of critical operating parameters. Meets EIA RS232C/D and RS422/RS485 (2 or 4-wire) specifications Fiberlink Fiber Link Tester Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events. Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/ TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. Standard ComFit models are hot-swappable. Lifetime Warranty ComFit standard form factor is designed for wall, surface, rack, or DIN rail mount installations (using optional card cage or DIN mounting bracket). Compact form-factor saves space in those installations where space may be at a premium.

    In stock

    £940.75

    £1,101.93

    Save £161.18
    Add to cart
  • ComNet RS232/RS422/RS485 Data Transceiver (FDX60M1BM) Add to cart
  • StarTech.com
    This compact Gigabit Fiber to Ethernet Media Converter enables Cat6 or similar cabling to be upgraded to an EMI-free fiber connection. The TAA-compliant adapter is PoE powered by, making it a perfect choice when external power options are unavailable.Simplified InstallationThe unmanaged fiber media converter features a plug-and-play design that does not require additional software or settings to be changed. The metal housing features an IP20 rating and is an all-in-one construction with integrated LC fiber and RJ45 ports. The RJ45 side features a metal tab to ensure a reliable and secure fit and prevent accidental disconnections.Network FeaturesThe PoE media converter is designed to work seamlessly with any networking equipment that is PoE-capable and supports the 802.3af standard or higher. It comes equipped with a range of PoE protection features, including Over Voltage Protection (OVP), Over Current Protection (OCP), Over Temperature Protection (OTP), and 2KV Surge Protection. The LC slot is compatible with Single-Mode (10km) and Multimode (800m) fiber cables up to 1Gbps. A spring-loaded tab protects the port when not in use. The converter supports LFPT (Link Fault Pass-Through), allowing IT administrators to monitor and assess network connectivity at a glance based on the LED behavior.CompatibilityThis LAN-to-fiber converter is ideal for upgrading computers, switches, routers, or other equipment from copper to fiber. It suits various applications, including field deployments, industrial automation, telecommunications, broadcasting, data centers, and remote networking. Experience reliable connectivity with EMI immunity over long distances with this compact (3.2×0.8×0.7in/82.39x20x17.5mm) and power-efficient (2.5W max) dongle.

    In stock

    £125.05
    Add to cart
  • StarTech.com (D01ML55PFIBERMEDIA) Transceivers/Media Converters (D01ML55P-FIBER-MEDIA) Add to cart
  • Altronix
    Altronix NetWaySP4B PoE+ Switch board provides two (2) 1Gb SFP (Fiber) ports and four (4) PoE+ (30W) or two (2) Hi-PoE (60W) ports. Cameras/edge devices may be located up to 100m from the unit. Embedded LINQ Technology allows you to monitor, control, and report power and diagnostics from anywhere.

    In stock

    £450.38

    £706.76

    Save £256.38
    Add to cart
  • Altronix 4-port PoE+ Switch Board (NETWAYSP4B) Add to cart
  • ComNet
    The ComNet™ Ethernet CNFE100X media converter series are one-channel Ethernet electrical to optical media converters. These auto-negotiating devices accept a 10/100 Mbps electrical input and convert this to a 100 Mbps optical output. This series of media converters use multimode and single-mode optical fiber and one and two fiber SC and ST optical connectors. LED indicators confirm operational status. All models are environmentally hardened with no electrical or optical adjustments (Plug and Play). Packaged in the exclusive ComNet ComFit housing, the standard size units may be either wall or rack mounted. Models within the series are also available in a small size. The units are powered by an included DC power supply.

    In stock

    £637.3

    £732.21

    Save £94.91
    Add to cart
  • ComNet CNFE1004M1A Transceiver/Media Converter Add to cart