Tripp Lite PV2400FC PowerVerter Plus Inverter 2400W, 24V DC to 120V AC, Pulse-width Modulated Sine Wave
Tripp Lite PV2400FC PowerVerter Plus Inverter 2400W, 24V DC to 120V AC, Pulse-width Modulated Sine Wave
Tripp Lite PV2400FC
- Free Shipping
- 1 Year Warranty
- 30 Day Returns
- Carbon Neutral
Product Key Features
- Designed for heavy duty and motor loads
- 24V DC input; 120V AC output; 2 outlets
- 2400W continuous output
- Peak surge output: OverPower (up to 1 hour)—3600W; Double-Boost (up to 10 seconds)—4800W
- High-efficiency power conversion
- Automatic overload protection
hrs
mins
Shipping information
Tripp Lite
PV2400FC
Continuously supplies up to 2400W of 120V AC power to 2 AC outlets from any 24V battery or automotive DC source. Frequency control locks AC output at 60Hz for operating stability of motor loads. Includes a set of high current DC input terminals for simple, permanent installation. Highly reliable large transformer design specializes in powering motors and other inductive loads with high-current startup needs.
Industrial-Strength 2400 Watt Power Inverter
Are you tired of filling heavy gas cans? Are you looking for a clean, reliable alternative to a portable generator? The PV2400FC PowerVerter® Plus Inverter is the solution you seek! The PV2400FC powers the equipment you commonly use at home or work—power tools, pumps, portable lighting, notebook computers and more—wherever life takes you. It's the ideal power solution for RVs, commercial and fleet vehicles, emergency vehicles, construction sites, remote worksites and any other application that requires a clean, quiet AC power source. The PV2400FC efficiently converts DC (battery) power into 120V AC (household) power to run any type of equipment, from power tools to computers. And unlike portable generators, the PV2400FC requires no fuel and produces no noise or fumes. With its 2400-watt capacity, this inverter can handle heavy-duty loads like drills, saws and pumps with ease. The PV2400FC also features OverPower™ and DoubleBoost™ capability, providing extra power when required for heavy loads and power-hungry equipment start-ups.
Industrial-Strength Output Power
The PV2400FC efficiently converts DC power from a vehicle battery into 120V AC power for any type of equipment, from heavy-duty drills, saws and pumps to computers and sensitive monitoring equipment. The PV2400FC provides safe, stable, AC output power to help connected equipment perform at its peak. A frequency control feature ensures that devices dependent on tightly regulated AC line frequency, such as computers, VCRs and DVD/CD players, receive clean computer-grade power.
Extended Peak Surge Power
Many tools, appliances and printers require extra power for start-up. Others, such as refrigerators and pumps, have fluctuating power demands. The PV2400FC accommodates these peak surge demands by providing up to 200% more output power than its continuous rating of 2400 watts. In OverPower mode, the PV2400FC can deliver 3600 watts for up to an hour, providing ample reserve power to keep tools and equipment running longer. In DoubleBoost mode, it can deliver 4800 watts for up to 10 seconds to support power-hungry equipment start-ups and motor cycling requirements.
Diagnostic LEDs
The PV2400FC features two sets of diagnostic LEDs to indicate load level (high, medium and low) and battery charge (high, medium and low).
Automatic Overload Shutdown
To prevent damage to the inverter and connected equipment, the PV2400FC will shut down automatically if an overload is detected at the inverter outlets. The red Load Level Indicator LED will flash to alert you that an overload has occurred.
Efficient and Safe for Batteries
With its 90%+ efficiency rating, the PV2400FC maximizes battery performance to run connected equipment longer. It also features a Load Sense (battery charge conservation) setting to prevent overtaxing your batteries. An automatic low-battery shutdown feature ensures you'll always have sufficient battery power available to start your vehicle.
Heavy-Duty Construction
The PV2400FC features a rugged, moisture-resistant polycarbonate housing that's built to withstand vibration and impact—ideal for use at remote worksites, in trucks, RVs and other vehicles, on boats or anywhere that reliable AC power is needed.
Simple Installation and Equipment Connection
The PV2400FC features integral mounting slots for permanent installation on any rigid, horizontal surface, such as the bed of a pickup truck. Connecting the PV2400FC to your battery system is quick and easy with readily available, user-supplied cables. AC power is provided to connected equipment via two standard 5-15R receptacles on the front of the unit. The PV2400FC is also equipped with an RJ45 port for connection of an optional Remote Control LED/Switch Module (Tripp Lite model APSRM4), enabling you to control and monitor the inverter from virtually anywhere within a vehicle.
Return Policy |
Time to Return |
Standard Return Policy |
We offer a hassle-free 30-day returns policy for domestic (US) orders, excluding non-refundable items. Refund or Replacement within 30 days of the delivery date. All products that fall under the Standard Return Policy qualify for our 30-Day Hassle-Free Returns. Please see the section above for more details. |
Replacement Only Return Policy |
Replacement within 30 days of the delivery date. |
Manufacturer Only Return Policy |
Covered by the manufacturer's warranty. Please refer to the terms and conditions for the manufacturer's warranty or contact the manufacturer. |
Holiday Extended Return Policies |
Extended Holiday Return Policy.Qualifying purchases of products displaying the " Extended Holiday Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Refund or Replacement until January 31, 2024. Extended Holiday Replacement-Only Return PolicyQualifying purchases of products displaying the " Extended Holiday Replacement-Only Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Replacement until January 31, 2024. |