network applications

Product Type

Vendor

Price

£

Condition

12 products
  • Black Box
    Use in our Black Box® GigaTrue® channel or mix with components from other manufacturers. Also available in 25-packs.

    In stock

    £15.01
    Add to cart
  • Black Box EVNSL671-0005 GigaTrue Cat.6 UTP Patch Cable, 5 ft, Full Power Sum Performance Add to cart
  • Axiom
    Axiom Bi-Directional SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network.100% Guaranteed Compatibility in all OEM applicationsPart number and unique product serialization; Eliminates any network communication conflicts and provides easy identificationFully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platformsOriginal Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only.

    Sold out

    £126.19

    £134.15

    Save £7.96
  • Axiom GLC-BX40-DA-I-AX 1000BASE-BX40-D SFP Transceiver for Cisco, Gigabit Ethernet, Optical Fiber Add to cart
  • AddOn
    This Finisar® FWLF15217D57 compatible SFP transceiver provides 1000Base-CWDM throughput up to 80km over single-mode fiber (SMF) using a wavelength of 1570nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent Finisar® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Finisar®, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.

    Sold out

    £254.38

    £398.85

    Save £144.48
  • AddOn FWLF15217D57-AO SFP (mini-GBIC) Module, TAA Compliant 1000Base-CWDM Transceiver Add to cart
  • Tripp Lite
    Tripp Lite's 5-meter multimode duplex Fibre Channel optic LC/LC patch cable is manufactured from 50/125 zipcord fiber. The cable has LC connectors on each end. It has a PVC jacket and is FDDI and OFNR rated. 50/125 Duplex multimode fiber is most commonly used in Fibre Channel applications. It is backward compatible with 62.5 micron fiber and provides built-in headroom for future applications. The cable provides higher bandwidth optimized for Gigabit and 10Gbps networks as well. Also available in 1, 2, 3, 10, 15, 20, 25, 30, and 50 meter lengths. Enter "N520-" in the search field to bring up all lengths. For LC-SC cables, search "N516-" , and for SC-SC, search "N506-". Tripp Lite warrants this product to be free from defects in materials and workmanship for life.

    In stock

    £21.4
    Add to cart
  • Tripp Lite N520-05M Duplex Fiber Optic Patch Cable, 16.40 ft, LC/LC 50/125 Fiber Add to cart
  • AddOn
    This Infinera® TRX100015/61 compatible SFP transceiver provides 1000Base-CWDM throughput up to 80km over single-mode fiber (SMF) at a wavelength of 1610nm using an LC connector. It is guaranteed to be 100% compatible with the equivalent Infinera® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.

    Sold out

    £254.38

    £398.85

    Save £144.48
  • AddOn TRX100015/61-AO SFP Module, 1G-CWDM LC 1610NM 80KM SMF SFP Add to cart
  • Neutrik
    etherCON CAT6Acable connector self-termination, for insulation diameter > 1.1 mm, black platingThe set NE8MX6-B includes a cable plug carrier offering a robust metal, proven Neutrik chuck-type strain relief and a CAT6ARJ45 plug. The set is suitable for a cable diameter range of 7 mm to 9.5 mm and wire gauge of AWG24/1 - AWG22/1 (solid) or AWG24/7 - AWG22/7 (stranded).

    In stock

    £25.07
    Add to cart
  • Neutrik NE8MX6-B Network Connector, Latch Lock, Strain Relief, PoE++, Water Resistant Add to cart
  • AddOn
    This HP® compatible SFP transceiver provides 1000Base-CWDM throughput up to 80km over single-mode fiber (SMF) at a wavelength of 1550nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent HP® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of HP®, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.

    Sold out

    £266.32

    £398.85

    Save £132.53
  • AddOn J4860C-CW55-AO SFP (mini-GBIC) Module, TAA Compliant 1000Base-CWDM Transceiver Add to cart
  • StarTech.com
    The SFP-10GB-BX-D-STA-ST is a MSA compliant downstream fiber SFP+ transceiver which pairs with StarTech.com's SFP-10GB-BX-U-STA-ST. They are designed, programmed and tested to work with 10GBase-BX compatible MSA switches and routers. The SFP+ transceiver module supports a maximum distance of up to 10 km (6.2 mi) and delivers dependable 10 GbE connectivity over fiber cabling. Technical Specifications: Wavelength: 1330nmTx/1270nmRx Maximum Data Transfer Rate: 10Gbps Type: Single Mode Fiber Connection Type: LC Connector Maximum Transfer Distance: 10 km (6.2 mi) Power Consumption: < 1.3W DDM: Yes This SFP+ fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions. StarTech.com SFPs All StarTech.com SFP & SFP+ transceiver modules are backed by a lifetime warranty and free lifetime multilingual technical support. StarTech.com offers a wide variety of SFP modules and direct-attach SFP Cables, providing the convenience and reliability you need to ensure dependable network performance. More from the Manufacturer

    In stock

    £104.29
    Add to cart
  • StarTech.com SFP-10GB-BX-D-STA-ST MSA Compliant SFP+ Transceiver Module - 10GBase-BX (Downstream), Lifetime Warranty Add to cart
  • Finisar
    Finisar's FTLX8574D3BCV 1G/10G Dual-Rate SFP+ optical transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, IEEE 802.3-2012 10GBASE-SR/SW and 1000BASE-SX. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8574D3BCV is a "limiting module" , i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperability with an SFP+ limiting module. This product is for applications specifically designed for 10G SFP+ ports and 1G/10GSFP+ ports and not native 1G SFP ports. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

    In stock

    £48.16
    Add to cart
  • Finisar FTLX8574D3BCV SFP+ Module, LC Duplex 10GBase-SR/SW Network, Multi-mode Optical Fiber Add to cart
  • Tripp Lite
    This category 6, molded patch cable lets you stay ahead of the game by using a high-speed cable to distribute data, voice and video. Cable delivers stable performance up to 550MHz. High-quality copper wire and a staggered-pin plug design keep near-end cross-talk levels to a minimum. Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation. 7' cable is designed for use in category 6, category 5e and category 5 applications.

    In stock

    £14.72
    Add to cart
  • Tripp Lite N201-007-GY Cat.6 UTP Patch Network Cable, 7 ft, Gray, Gigabit Ethernet Add to cart
  • Intel
    Designed with the bridgeless Intel® Ethernet Controller I350, this 1GbE adapter delivers performance through industry leading enhancements for both virtualized and iSCSI networking environments.A suite of hardware assists improves overall system performance by lowering the I/O overhead in virtualized environments. iSCSI simplifies SAN connectivity by eliminating the need for SAN- specific adapters or switches.This adapter also includes power management technologies such as Energy Efficient Ethernet (EEE) and DMA Coalescing (DMAC). With advanced Power Management Technologies, customers can configure power options on the adapter and more effectively manage their power consumption.The Intel® Ethernet I350 Server Adapters includes these featured technologies:Flexible I/O VirtualizationThe Intel® Ethernet I350 adapters include Intel® Virtualization Technology for connectivity (Intel VT-c) to deliver I/O virtualization and Quality of Service (QoS) features designed directly into the I350 controller on the adapter. I/O virtualization advances network connectivity models used in today's servers to more efficient models by providing Flexible Port Partitioning (FPP), multiple Rx/Tx queues, and on-controller QoS functionality that can be used in both virtual and non-virtual server deployments.By taking advantage of the PCI-SIG SR-IOV specification, Intel® Ethernet products enable Flexible Port Partitioning (FPP). With FPP, virtual controllers can be used by the Linux host directly and/or assigned to virtual machines. With this port partitioning, administrators can create up to eight dedicated networks on a single Ethernet port for use in baremetal and virtualized server deployments.In a bare-metal Linux server, host processes can be assigned to dedicated network resources to provide traffic isolation and balanced bandwidth allocation.In a virtualized environment, a VM can be assigned to a virtual controller to reduce the CPU overhead seen when using a software-based network bridge, by offloading network traffic management to the Ethernet controller silicon.Scalable iSCSI PerformanceiSCSI uses Ethernet to carry storage traffic, extending the familiarity and simplicity of Ethernet to storage networking, without the need for SAN-specific adapters or switches. Intel® Ethernet adapters, with built-in iSCSI initiators for Microsoft Windows, Linux, and VMware ESXi platforms, provide a simple, dependable, cost-effective way to connect to LANs and iSCSI SANs.Intel® Ethernet adapters include hardware-based iSCSI acceleration features that do not require offloading to a proprietary TCP/IP stack. iSCSI acceleration uses large send offload, Receive Side Coalescing and transmit send offloads to help reduce latency and lower CPU utilization. To improve efficiency, MSI-X, Receive-side Scaling and Intel® Ethernet Flow Director, scale I/O processing across multiple CPU cores. Direct memory access (DMA), direct cache access (DCA) and header splitting improve network data processing efficiency, and data center bridging (DCB) supports multiple traffic classes that can be prioritized for iSCSI traffic.These built-in initiators are broadly tested using multiple generations of operating systems, storage systems, and OS tools to help ensure reliability and ease of use. Standardizing on Intel Ethernet for iSCSI allows administrators to use a single initiator, TCP/IP stack, and a common set of management tools and IT policies.

    In stock

    £136.83
    Add to cart
  • Intel I350T2V2 Ethernet Server Adapter I350-T2, Gigabit Ethernet Card, 2 Ports, Twisted Pair, Category 5e [Discontinued] Add to cart
  • AddOn
    This MRV® SFP-10GCWZR-57 compatible SFP+ transceiver provides 10GBase-CWDM throughput up to 80km over single-mode fiber (SMF) at a wavelength of 1570nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent MRV® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. All of our transceivers are Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.

    Sold out

    £2,272.21

    £3,583.25

    Save £1,311.04
  • AddOn SFP-10GCWZR-57-AO SFP+ Module, LC 10GBase-CWDM Network, Single-mode, TAA Compliant Add to cart