The KanexPro Audio De-Embedder is a simple device, designed to extract HDMI audio from HDMI signals. It outputs to analog 2-channel stereo or to digital S/PDIF providing multichannel audio up to 5.1 surround sound. Supports data rates up to 6.75 Gbps to all channels with HDMI 1.3 Deep Color. The audio de-embedder is HDCP compliant, displaying resolutions to 1080p/60 and PC resolutions up to 1920x1200.Input cable equalization on the audio de-embedder compensates for weak source signals or signal loss when using long input cable runs. Supports wide variety of audio formats from two-channel PCM or encoded bit stream audio for Dolby® Digital to 5.1 DTS® Digital Surround.The Kanex Audio De-embedder is a perfect problem solver for many applications that require audio extraction from HDMI signals.

In stock

The UA221DB-RSMA splits an incoming signal into two outgoing signals, allowing two GLXD4R+ receivers to share a single pair of antennas. Designed for use with UA8-2.4-5.8 omnidirectional antennas and PA805DB-RSMA directional antennas.

In stock

This Mini DisplayPort 1.2 to Dual HDMI MST Hub allows a Mini DisplayPort enabled device to connect to two HDMI enabled displays for video mirroring, video extension, or viewing a single video image across two displays. The hub is perfect for graphic design, spreadsheet analysis, and digital signage applications. This MST hub is a perfect accessory for Microsoft Surface products and other leading laptops. Improve multitasking and increase productivity by configuring the hub to work as a splitter with the same video image on each display, extending a video image to multiple displays, or expanding a video image by joining multiple monitors together as one display. The hub is ideal for a multiple display desk setup and the light-weight, small form factor, also makes it easy to carry while traveling or just on the go The hub supports resolutions up to 4K (3840 x 2160) at 60Hz when connected to a single display or 4K (3840 x 2160) at 30Hz when connected to dual displays and has a max bandwidth of 5.4Gbps. Note: This hub requires 5V/2A of power. In some instances, depending on the connected source device, additional external power may be required through the USB Micro-B port on the hub. This MST hub is DisplayPort 1.2 compliant. The source device video card and display must support DisplayPort 1.2 and MST.

In stock

Multi Stream Transport Hub DisplayPort 1.2 Dual Monitor CSV-6200 - The Club3D SenseVision MST Hubs utilise Multi Stream Transport, a unique DisplayPort™ 1.2 feature that creates the ability to transport multiple independent uncompressed display (and audio) streams over a single cable, supporting protected content and high performance applications such as 3D gaming. This enables the use of multiple monitors connected by MST hub configuration. The Club3D MST Hubs is able to distribute those video streams to the connected screens. The CSV-6200 is Plug & Play and does not require any driver installation. The Club3D MST Hubs do not increase the bandwidth of the DisplayPort™ 1.2 output of the source system, but it enables the optimal use of it. Note: When using a DisplayPort™ 1.1 video card the MST hub will act as a splitter, automatically mirroring your video source across all displays.

In stock

Quick Facts Acts as repeaters, isolators, and extenders. T Isolates the TD, RD, RTS, and CTS channels, supports 115.2-kbps speeds on all four channels, and extends the RS-232 signal beyond 50 feet (15.2 m). Further DetailsProtect equipment from ground loops and spikes while optically isolating it from the rest of a network and expanding a system beyond node or distance limits.

In stock

Featuring multiple ports for splitting modem signals, the compact 4-Port Modem Splitter (RS-232 on RJ-45) makes it easy and affordable for four terminals to share a single modem. With it, you can avoid the cost of having to purchase and install multiple modems and multiple modem lines. Plus, it's easy to set up and use. There are no user-configurable switches, jumpers, or settings on the modem splitter. Simply connect the modem and terminal (DTE) devices to it, then power up your modem and terminals as normal. The splitter's master port connects to your modem using an RJ-45 straight-through cable and the appropriate RJ or DB adapter. Its other ports (Port 1 through Port 4) connect to your DTE terminal devices. NOTE: Only one terminal device can send data to the modem at a time.

In stock

The affordably priced splitter enables you to accurately duplicate one HD video and stereo input for output to four screens.The splitter ensures accurate and reliable video output without signal distortion and attenuation, supporting display resolutions of up to Full HD (1920 x 1080) as well as WUXGA (1920 x 1200) and UXGA (1600 x 1200).And because it's fully HDCP compliant, you can use the splitter to distribute multimedia content from a Blu-ray player or other HDCP-protected source.Plus, the splitter can be used with the newest EDID-capable screens. It obtains EDID data from the connected displays so your source device's video card is optimized for displaying video on those screens.

In stock

Designing systems capable of distributing 4K Ultra High Definition media requires support for the content of today, and headroom for the content of tomorrow. Gefen's EXT-UHD600 Series of splitters take HDMI 2.0 to its highest specification of 4K 60 Hz at 4:4:4 chroma subsampling, along with HDR (High Dynamic Range) support. They go beyond the requirements of typical 4K systems, delivering stunning Ultra HD and DCI/Cinema picture up to 4096 x 2160 pixels at 60 frames per second without subsampling color. This ensures that the scene shown on the display is every bit as brilliant as the picture that the camera captured. HDR lets every subtle nuanced gradation of each pixel play out across the screen in immersive clarity. Gefen's EXT-UHD600 product line creates a seamless bridge between the digital media of yesterday, today, and tomorrow. Supporting the digital rights management standard for Ultra High Definition content, HDCP 2.2, as well as the legacy HDCP 1.4, Gefen's EXT-UHD600 products can handle the signal routing needs for both existing and new components in commercial and residential AV systems. Highest performance multichannel digital audio including 7.1 channels of LPCM and HBR (High Bit Rate) digital audio formats such as Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™ are also supported. These splitters have been specifically designed to support multiple layers of cascading** for flawless performance in large video distribution and signage applications, supporting up to hundreds of displays. Gefen's exclusive Long Reach Power (LRP) feature provides 5V at 500 mA (as opposed to HDMI standard 55 mA) on pin 18 of HDMI outputs 1 and 2. This enhanced current capability enables select extender devices to be powered through their HDMI input port without the need for an external power supply. Gefen's EXT-UHD600 product line was designed to work with Gefen's Syner-G™ software suite. EDID and HDCP management, status monitoring, and firmware updates can be done in minutes using the Gefen Syner-G™ software. The Gefen EXT-UHD600-14 splitter features a low profile, compact, and surface-mountable enclosure that can fit in tight places. It also accommodates Gefen locking HDMI cables for secure connections.

In stock

The 4K 1 x 8 HDMI Splitter enables HDMI video and audio distribution from one source to eight displays. Advanced EDID functionality enables the switch to read and copy EDID automatically from the screens, or a user can manually copy the EDID audio/video information to the switch.

In stock

Broadcast HD video, even HDCP content, to two displays with this easy-to-use splitter.

In stock

The 4XEM 2-to-1 RJ45 Splitter Cable Adapter - F/M- CAT5E is the perfect solution for expanding your network without the hassle of additional cables. With this splitter adapter, you can easily connect up to three network devices using just one Ethernet port. Whether you need to connect multiple devices in your home or office, this adapter provides a convenient and efficient solution. Designed for compatibility with CAT5E cables, this splitter adapter ensures reliable and fast data transmission, allowing you to enjoy seamless connectivity. Its durable PVC construction guarantees long-lasting performance, while its lightweight design makes it easy to carry and use wherever you go. With the 4XEM 2-to-1 RJ45 Splitter Cable Adapter - F/M- CAT5E, you can effortlessly expand your network capabilities and connect multiple devices without the need for additional cables. Say goodbye to tangled wires and hello to simplified networking. Upgrade your network setup today with this reliable and versatile splitter adapter from 4XEM.

In stock

The GefenTV HDMI to HDMI Audio Converter is a product that takes a Hi-Def source using HDMI and outputs it to an HDTV display using HDMI and, in addition, up to 8 channels of LPCM audio output through eight RCA connectors. Bitstream is output to an Optical digital connector. Additional features include switchable audio selections between auto mode and manual mode affording further selection between two-channel audio only, multi-channel bitstream and 7.1 LPCM audio.

In stock

Distibutes HDMI video and audio from a single source to up to 4 HDMI displays simultaneously, with auto video scaling and audio extraction, without signal degradation Distributes HDMI video and audio from a single source to up to 4 HDMI displays simultaneously while maintaining signal quality Compliant with HDMI 2.0a, HDCP 2.2/1.4 with 18Gbps bandwidth Compatible with 4K@60Hz (YUV 4:4:4 8-bit), HDR 4K@60Hz (YUV 4:2:0 10-bit), 3D, xvYCC, x.v.Color & Deep Color & 7.1 CH surround sound audio HDMI output 4 supports HDR to SDR conversion for use with non-HDR monitors Auto Video Scaling Feature detects and configures the video resolution automatically according to the capabilities of each connected monitors. Note: 4K@30Hz monitors will display in 1080p@60Hz when the source content is 4K@60Hz Extracts audio from an incoming digital HDMI signal and converts it to an Optical S/PDIF Toslink and a stereo analog audio output. Capable of splitting audio to both outputs simultaneously High quality materials with metal housing extend the stability and durability, allowing for long hours of operation. Built-in EDID management and firmware update mechanism further expand the compatibility Individual LED indicators for power and signal allow for easy and quick recognition

In stock

Features Distributes HDMI video and audio from a single source to up to 2 HDMI displays simultaneously while maintaining signal quality Compliant with HDCP 2.3/1.4 with 40Gbps bandwidth, resolution up to 4K@120Hz (4:4:4/4:2:2/4:2:0), 4K@60Hz (4:2:0 10-bit/12-bit) Supports VRR (Variable Refresh Rate) & ALLM (Auto Low Latency Mode) Supports xvYCC, x.v.Color & Deep Color; Supports default EDID and EDID learning from display Supports audio extraction via Toslink & stereo; Supports Dolby Digital, DTS-HD and Dolby TrueHD audio Supports default EDID and EDID learning from display; Supports resolution downscaling from 4K to 1080p or upscaling from 1080p to 4K Micro-USB firmware update for expanding compatibility, High quality materials with metal housing extend the stability and durability, allowing for long hours of operation. Applications Meeting room Lecture hall Educational facilities Multimedia education Restaurant Shopping center Library Show room

In stock

Share two 4K HDMI displays (mirror mode) between two 4K HDMI sources with IR remote control switching and EDID management Distributes HDMI video and audio from two HDMI sources to up to 2 HDMI displays simultaneously while maintaining signal quality Compliant with HDMI 2.0a, HDCP 2.2/1.4 with 18Gbps bandwidth Supports resolutions up to 4Kx2K@60Hz (YUV 4:4:4 8-bit), 3D, HDR, 36-bit Deep Color Supports LPCM 7.1, Dolby TrueHD, Dolby Digital Plus, and DTS-HD Master Audio Supports stereo audio extraction to 3.5mm audio output jack for 2ch stereo source devices only Auto video scaling feature, via HDCP detection of your connected display, detects and configures the video resolution automatically according to the capabilities of the connected monitors High quality materials and metal housing extends the stability and durability, allowing for long hours of operation Built-in EDID management and firmware update mechanism further expands compatibility EDID modes are controlled by the included remote control, push button control cycles between Auto EDID, Copy EDID, and Mixed EDID modes Individual LED indicators for power and EDID mode allow for easy and quick operating status Compatibility Notes:- 4K@30Hz monitors will display in 1080p @60Hz resolution- Does not support 4K/60Hz YUV 422 down scaling- The 2 HDMI outputs mirror each other, extended displays are not supported

In stock

Quick Facts Act as repeaters, isolators, and extenders. The RS-422/RS-485 model isolates RS-422/485 equipment, features selectable rates between 2400 bps and 115.2 kbps, and enables a system to exceed 32-node limitations. The RS-232 model isolates the TD, RD, RTS, and CTS channels, supports 115.2-kbps speeds on all four channels, and extends the RS-232 signal beyond 50 feet (15.2 m).

In stock

DP 1.4 MST Video Splitter Hub, Triple DP outputs, Connect up to three DisplayPort displays to single DisplayPort 1.4 output with Multi-Stream Transport (MST), 32.4Gbps, no driver required, Dual 4K@60Hz or Triple 4K (4K@30Hz or 1x 4K@60Hz + 2x 4K@30Hz), supports DP 1.2 with limited performance, Full Windows compatibility, Mac OS supports mirror only, TAA CompliantFeatures Splits a single DisplayPort 1.4 output source to three DisplayPort monitors with Mirror, Extended and Panoramic video wall display modes High PerformanceOffers a true 32.4Gbps (Max.) video bandwidth and supports 7.1-ch surround sound up to 192KHz sampling rate (can be used to transmit audio and video simultaneously) Video ResolutionSupports HDCP 2.2 and Ultra HD video resolution up to a single 8K (7680x4320) @30Hz with HDR display or dual 4K (3840x2160) @60Hz with HDR displays or Triple 4K (3840x2160) @30Hz Display ModesSupports various supplication such as Mirror, Extended, and Panoramic Video Wall modes. Mirror mode same content on each display, Extended mode with individual content on each display, and Panoramic Video Wall mode which combines multiple monitors to use as one large display Multiple Connectivity PortComes with one 20-pin DisplayPort 1.4 input port (Host), three 20-pin DisplayPort 1.4 video output ports, one 5-pin Micro USB for power input (at least 5V/500mA), one reset button, and one DisplayPort 1.4 detachable cable Maximum CompatibilityCompatible with DisplayPort 1.4 graphics card with AMD Eyefinity, Intel Collage or NVIDIA Surround technology Aluminum Housing DesignPremium aluminum housing decreases outer interference and provides optimal video quality. The reset button allows re-detection of all the displays if any of the displays are not detected Applications Video editing Workstation Office Home office Conference room Educational facilities Small seminar Gaming Medical office Small seminar Medical office Hotel Testing lab Banking Service counter Need to Know Before Buying 1. Make sure your system requirement has a DisplayPort video output specification 1.4 and supports Multi Stream Transport (MST). If you are not sure, please check with the video card or system manufacture

In stock

This 4-way splitter is compatible with digital broadcast television, digital cable television, off-air antennas and satellite distribution from 15 to 2,150 MHz. Zinc-plated, die-cast housing with precision-machined ports and a soldered back ensure 140 dB isolation against RF leakage. PC board technology eliminates low frequency hum for less noise, and provides a clean, stable return path for data from the cable box or cable modem. DC-passive for devices requiring DC power such as amplified antennas and DBS dishes.

In stock

Designing systems capable of distributing 4K Ultra High Definition media requires support for the content of today, and headroom for the content of tomorrow. Gefen's EXT-UHD600 Series of splitters take HDMI 2.0 to its highest specification of 4K 60 Hz at 4:4:4 chroma subsampling, along with HDR (High Dynamic Range) support. They go beyond the requirements of typical 4K systems, delivering stunning Ultra HD and DCI/Cinema picture up to 4096 x 2160 pixels at 60 frames per second without subsampling color. This ensures that the scene shown on the display is every bit as brilliant as the picture that the camera captured. HDR lets every subtle nuanced gradation of each pixel play out across the screen in immersive clarity. Gefen's EXT-UHD600 product line creates a seamless bridge between the digital media of yesterday, today, and tomorrow. Supporting the digital rights management standard for Ultra High Definition content, HDCP 2.2, as well as the legacy HDCP 1.4, Gefen's EXT-UHD600 products can handle the signal routing needs for both existing and new components in commercial and residential AV systems. Highest performance multichannel digital audio including 7.1 channels of LPCM and HBR (High Bit Rate) digital audio formats such as Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™ are also supported. These splitters have been specifically designed to support multiple layers of cascading** for flawless performance in large video distribution and signage applications, supporting up to hundreds of displays. Gefen's exclusive Long Reach Power (LRP) feature provides 5V at 500 mA (as opposed to HDMI standard 55 mA) on pin 18 of HDMI outputs 1 and 2. This enhanced current capability enables select extender devices to be powered through their HDMI input port without the need for an external power supply. Gefen's EXT-UHD600 product line was designed to work with Gefen's Syner-G™ software suite. EDID and HDCP management, status monitoring, and firmware updates can be done in minutes using the Gefen Syner-G™ software. The Gefen EXT-UHD600-18 splitter features a 1U tall, rack-mountable enclosure that can also be placed on a shelf. It accommodates Gefen locking HDMI cables for secure connections.

In stock

The DisplayPort Female to Female Coupler is the perfect solution for combining two DisplayPort cables to achieve connectivity over a longer distance. The coupler is compact and designed for minimal signal loss. The passive design of this coupler allows it to support video resolutions of up to 1080p. Note: Standard signal length limitations apply to coupled cables

In stock

Use the 2x1Split passive splitter/combiner to make an 8-channel IEM combiner, create a distributed antenna system, or to tap into your spectrum analyzer to get more insight into your setup. One output can pass 12V DC antenna power if DC power over coax is provided.

In stock

In stock

The affordably priced splitter enables you to accurately duplicate one HD video and stereo input for output to eight screens.The splitter ensures accurate and reliable video output without signal distortion and attenuation, supporting display resolutions of up to Full HD (1920 x 1080) as well as WUXGA (1920 x 1200) and UXGA (1600 x 1200).And because it's fully HDCP compliant, you can use the splitter to distribute multimedia content from a Blu-ray player or other HDCP-protected source.Plus, the splitter can be used with the newest EDID-capable screens. It obtains EDID data from the connected displays so your source device's video card is optimized for displaying video on those screens.

In stock

Supports NTSC, PAL, and SECAM video. For color video over CAT5, the balun supports 2200-foot (670.5-m) distances. Running multiple cables for your CCTV cameras and other devices? Extend your links while using inexpensive UTP cable instead of coax wiring with this balun.This balun has RJ-45 connectors and transmits video plus power over a single 4-pair CAT3 or CAT5 cable. It supports baseband, NTSC, PAL, or SECAM video at up to 2500 feet (762 m), plus it supports 24-VAC power at up to 518 feet (157.8 m) when using 5 VA.The balun works with the CCTV Passive Hubs (IC562A - IC563A).

In stock

In stock

The IOCrest SY-AUD60011 Digital to Analog Audio Converter is designed for home and professional audio switching. Switch from Coaxial or Optical (Toslink) digital audio signals to analog audio by connecting RCA-style jacks or A/V jacks and external sound devices such as amplifier, speakers and etc. to the converter. This digital to analog audio converter provides crisp and clear audio quality projected on loud speakers or systems.

In stock

In stock

This is a simplex SMF OS1 fiber optic attenuator, used in fiber optic links to reduce or attenuate optical power. This fixed value attenuator will reduce optical power by 2dB. It uses male to female LC connection and is used in single-mode (SMF) applications. This attenuator comes as a 2-pack. Our attenuators are cost effective and 100% compliant for all of your networking needs. Our products are guaranteed by federal law to not affect or void OEM warranties.

In stock

Broadcasts one 4K HDMI source signal to up to 16 4K HDMI displays simultaneously while maintaining video quality Distributes 4K HDMI video and audio signals from a single source to up to 16 4K HDMI displays simultaneously while maintaining signal quality Supports up to UHD 4Kx2K (3840x2160 @30Hz) resolution Supports high definition resolutions of 1080p@ 60Hz, 720p/1080i @120Hz Supports Dolby TrueHD and DTS-HD Master audio formats Sturdy metal housing provides durability and reduces EMI/RFI noise interference Low heat generation with sturdy metal housing provides excellent heat dissipation, durability, and minimizes EMI/RFI noise interference delivering reliable performance and long hours of trouble free operation

In stock

High quality bi-directional Coaxial (RCA) to Toslink Optical or Toslink Optical to Coaxial (RCA) audio converter High quality Coaxial/Toslink S/PDIF Optical bi-directional audio converter allows you to convert Coaxial RCA audio input to Toslink Optical audio output or Toslink Optical audio input to Coaxial RCA audio output Built-in digital audio signal amplifier maintains signal integrity without signal loss Easily switch between input and output direction with the handy built-in selection switches Supports LPCM, AC3, DTS audio, 24-bit audio depth, with sample rate up to 192KHz Sturdy metal enclosure provides durability and minimizes EMI/RF noise interference for long life and dependable performance Plug and play, no software installation required

In stock

The VERTIV 4-port rackmount or desktop single-user KVM switch (TBR02) is the perfect solution for efficient and convenient computer management. Whether you need to control multiple computers in a rack or on your desktop, this KVM switch offers the flexibility you need. With its TAA compliance, it meets the requirements for government procurement, ensuring peace of mind and compatibility with various systems. The USB, VGA, and DVI connectivity options allow for seamless integration with different devices, making it easy to switch between computers and manage them from a single console. Manufactured by Vertiv, a reliable brand known for its high-quality products, this KVM switch guarantees exceptional performance and durability. Upgrade your computer management capabilities with the VERTIV 4-port rackmount or desktop single-user KVM switch (TBR02) and experience enhanced productivity and convenience.

In stock

This MST hub lets you connect two DisplayPort monitors to your Mini DisplayPort computer. MST works on any Windows® device that supports DisplayPort 1.2, such as models of the Lenovo™ Think Pad® and Microsoft® Surface™. When connected to earlier revisions of DisplayPort, such as DP 1.1 the MST hub acts as a video splitter.The MST hub is USB powered, so the only thing you'll need to operate the hub is your computer. Increase your productivity with multiple monitors The newest generations of laptops are more portable than ever, unfortunately this means you're left with fewer video outputs and a small integrated screen. The MST hub solves these problems by letting you connect two independent displays to a single mDP port on your computer, which makes multitasking much easier. Using the MST hub, you can extend your desktop onto additional monitors and stream independent content to each display, which makes it easier to multitask and increase your productivity - perfect for creating an easy-to-dock hot desk solution with a wireless keyboard and mouse peripheral set. You can also mirror the same image onto multiple displays for remote viewing applications such as digital signage. Astonishing picture quality that won't drain your system resources MST technology uses your existing video card to minimize the use of system resources while delivering Ultra HD 4K resolutions. 4K is supported by the latest A/V devices and delivers four times the resolution of 1080p. Plus, because the MST hub can output high-definition 1080p, the MST hub is perfect for all high-resolution applications such as graphic design and medical imaging. Works with any monitor, television or projector With this MST hub, you can use separate mDP video adapters to connect HDMI, VGA or DVI displays, for compatibility with all of your existing monitors. The hub is VESA and DisplayPort certified to support DP 1.2 enabled systems, for seamless integration with your existing video equipment. The MSTMDP122DP has been certified by Microsoft and tested for compatibility with your Microsoft Surface Pro 3, Surface Pro 4 and Surface Book and is backed by a 3-year StarTech.com warranty and free lifetime technical support. More from the Manufacturer

In stock

In stock

In stock

This 4K HDMI splitter lets you connect your HDMI video source to eight HDMI displays, with support for Ultra HD resolutions and HDR (High Dynamic Range) as well as 7.1 surround sound audio. Supports true 4K at 60Hz This 8-port 4K 60Hz HDMI splitter offers full support for your HDMI 2.0 equipment, including true 4K resolution at 60Hz. For smoother video and color transitions, the splitter offers 4:4:4 chroma subsampling, meaning every pixel gets its own unique color. Support for HDMI 2.0 devices means this splitter can transmit bandwidth up to 18Gbps, making it the ideal solution for high-resolution tasks requiring the highest color detail. Note: In order to support 4K 60Hz coming through the splitter, each device in the chain must support HDCP 2.2. Widely compatible The splitter supports HDCP 2.2 and is backward compatible with 4K 30Hz and 1080p displays. This ensures that it will work with lower resolution displays such as TVs or projectors around your site or in your digital signage application. Easy installation and setup The 4K HDMI splitter offers easy plug-and-play installation with no additional software or drivers required. The splitter passes EDID between your video source and the display attached to port 1, ensuring native settings such as resolution and refresh rate are configured automatically. The ST128HD20 is backed by a 2-year StarTech.com warranty. More from the Manufacturer

In stock

Altronix HubWayAv Video Balun/Combiner is a UL Listed accessory that interfaces with HubWay and HubSat UTP Transceiver Hubs to transmit video, data, and power to 24VAC fixed or PTZ indoor or outdoor cameras.

In stock

The HDMI 1×4 Splitter, 4K60 (500426) allows one (1) HDMI 2.0 source to be distributed to up to four (4) HDMI displays. The splitter supports up to 4K (3840 X 2160) video @ 60Hz, HDR, Deep Color and HD audio. The splitter is HDCP 1.4 & 2.2 compliant and features EDID management and LED diagnostics. Each output supports an independent down-scaler from 4K to 1080p, depending on the connected display. Additionally, all connectors are on the rear panel for neater cabling. Typical Applications: Commercial and residential AV systems Classroom training systems Digital signage Boardroom systems Collaborative PC systems Medical video systems

In stock

The VS182A HDMI Splitter is the perfect solution for anyone who needs to send one source of digital high definition video to two displays at the same time. It supports all HDMI-enabled equipment, such as DVD players, satellite set-top boxes and all HDMI displays. The VS182A HDMI Splitter is HDCP (High Bandwidth Digital Content Protection) compliant, making it effective for use with all HDMI displays in home theater applications, as well as in corporate, educational and commercial settings. More from the Manufacturer

In stock

In stock

The ST122HDMI2 2-Port High Speed HDMI® Splitter and Signal Amplifier lets you share a single HDMI source signal with audio between two HDMI or DVI (using HDMI to DVI adapter - see Accessories) enabled displays simultaneously. Supporting True HD 1080p video resolutions, the HDMI splitter acts as a distribution amplifier that enables you to situate your HDMI-capable displays up to 50ft (15m) away from the splitter, and features 3.5mm audio connections, giving you the option of sending your accompanying audio signal through the HDMI cable, or through a separate channel. The HDMI splitter is easy to install and use with no software or configuration required, for a completely plug-and-play setup that can be used with HDMI output devices such as Blu-ray players or desktop/laptop computers. This product is TAA compliant and backed by a Startech.com 3-year warranty with free lifetime technical support. More from the Manufacturer

In stock

In stock

Ensure your 4K content is always on display on the right screens. The HDMI 2.0 Splitter supports HDMI 2.0 with resolutions up to 4K @ 60 Hz 4:4:4 8-bit and is HDCP 2.2 compliant. This device also supports EDID and HDCP management, which authenticates HDCP encryption between all devices, ensuring the HDMI source reliably outputs the correct content to the displays. With increased bandwidth up to 18 Gbps, you can split video signals to four displays while maintaining: Higher resolutions Higher frame rates Multiple full HD streams in the same pipe 21:9 aspect ratio

In stock