NetAlly LR-G2 LinkRunner G2 Smart Network Tester USB & RJ-45 Interfaces Lithium Ion Battery Twisted Pair Media
NetAlly LR-G2 LinkRunner G2 Smart Network Tester USB & RJ-45 Interfaces Lithium Ion Battery Twisted Pair Media
NetAlly LR-G2
- Free Shipping
- 1 Jahr. Garantie
- 30-tägige Rückgabe
- Klimaneutral
Produkthauptmerkmale
- Entdecken Sie über CDP/LLDP/EDP den nächsten Switch-Namen und Portinformationen und überprüfen Sie die Verbindungsgeschwindigkeit/Duplex und die Konnektivität zum TCP/IP-Netzwerk mit AutoTest
- Validieren Sie bis zu 90W Power over Ethernet (PoE) PSE in einem AutoTest - nützlich bei der Bereitstellung von IoT, VoIP und WLAN
- Installieren und führen Sie bevorzugte Android-basierte Apps für Geschwindigkeitstests, Gerätekonfiguration und Workflow-Management mit smartphoneähnlichen Funktionen aus
- Automatisieren Sie Berichterstellung und ermöglichen Sie Zusammenarbeit mit Testergebnishochladung und -verwaltung über den Link-Live-Cloud-Service
Stunden
Minuten
Versandinformationen
NetAlly LR-G2 LinkRunner G2 Smart Network Tester USB & RJ-45 Interfaces Lithium Ion Battery Twisted Pair Media
NetAlly LR-G2
- Free Shipping
- 1 Jahr. Garantie
- 30-tägige Rückgabe
- Klimaneutral
Stunden
Minuten
Versandinformationen
Produkthauptmerkmale
- Entdecken Sie über CDP/LLDP/EDP den nächsten Switch-Namen und Portinformationen und überprüfen Sie die Verbindungsgeschwindigkeit/Duplex und die Konnektivität zum TCP/IP-Netzwerk mit AutoTest
- Validieren Sie bis zu 90W Power over Ethernet (PoE) PSE in einem AutoTest - nützlich bei der Bereitstellung von IoT, VoIP und WLAN
- Installieren und führen Sie bevorzugte Android-basierte Apps für Geschwindigkeitstests, Gerätekonfiguration und Workflow-Management mit smartphoneähnlichen Funktionen aus
- Automatisieren Sie Berichterstellung und ermöglichen Sie Zusammenarbeit mit Testergebnishochladung und -verwaltung über den Link-Live-Cloud-Service
Produkte
NetAlly
LR-G2
LinkRunner G2 Smart Network Tester vereinfacht Netzwerkvalidierung und -konfiguration. Es unterstützt Netzwerkprofis, die für die Gerätebereitstellung und -fehlersuche verantwortlich sind, und erleichtert die Zusammenarbeit zwischen Teams. Für Organisationen, die vor der Herausforderung des schnellen Wachstums netzwerkverbundener Geräte stehen, ermöglicht dieses Testwerkzeug der nächsten Generation Netzwerkprofis, Bereitstellungen zu beschleunigen und Probleme schneller zu identifizieren, was die Effizienz und Effektivität des Netzwerkbetriebs und der Installationsvalidierung verbessert.
Die wichtigsten Funktionen des LinkRunner G2 umfassen mehrere benutzerkonfigurierbare AutoTests, Kabellängenmessung, Kabelfehlerortung und -typ, TruePower™ Power over Ethernet (PoE) Lasttest für bis zu 90W 802.3bt Type 4 PSEs, Ethernet-Geschwindigkeits- und Duplexüberprüfung bei 10/100/Gigabit-Raten, UTP-Kabeltest, Kupfer- und Glasfaser-Ethernet-Linktests, Identifizierung des nächstgelegenen Switches, VLAN-ID, DHCP, DNS- und Gateway-Konnektivitätstests sowie Ping- und TCP-Port-Konnektivitätstests zu einer unbegrenzten Anzahl von vom Benutzer ausgewählten Zielen.
Als weltweit erster Android-basierter Smart Network Tester verfügt der revolutionäre LinkRunner G2 über eine eingebaute Kamera, Lautsprecher & Mikrofon und ein großes Farbdisplay. Er führt Android-Apps aus, um verbundene Geräte zu konfigurieren und zu triagieren, und sogar das Netzwerk zu testen. Der LinkRunner G2 optimiert Workflows, indem er die wesentlichen Aspekte der Installation und Triagierung in einer einzigen, robusten Einheit vereint.
Testergebnisse können automatisch in die verschlüsselte und hochsichere Link-Live Ergebnisverwaltungsdatenbank hochgeladen werden, sobald jeder Test abgeschlossen ist, was eine größere Zusammenarbeit zwischen Netzwerkingenieuren und Technikern ermöglicht, eine größere Sichtbarkeit der Aufgaben, Projektsteuerung und Flottenmanagement.
A simple, comprehensive network validation and configuration platform that empowers network professionals.
LinkRunner G2 Smart Network Tester
Enhanced AutoTest diagnostics for configuration and validation of copper and fiber Ethernet networks and devices
The LinkRunner G2 simplifies network validation and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. Accelerate deployments, speed problem identification, and improve the efficiency and effectiveness of network operations with this next-generation Android-based tester. The LinkRunner G2 features an intuitive design that runs Android-based apps with smartphone-like features.
- Twisted-pair testing 10/100/1000BASE‑T
- Fiber-optic testing 100/1000BASE‑X
- Automated network connectivity testing
- Android-based OS for Ethernet connected app use
- Wi-Fi and Bluetooth ready
- Loaded power testing up to UPOE on all 4 pairs
- Cable validation including distance‑to‑fault
- Discover the nearest switch/slot/port and VLAN/Voice VLAN
- DHCP, DNS, and Gateway connectivity test
- Ping and TCP port connectivity test
- Automated test result upload to Link-Live Cloud Service
- Packet reflection up to 1 Gbps
LinkRunner G2- Smart Network Tester
LinkRunner G2 Product Overview.
Discover Nearest Switch and VLAN
The LinkRunner G2 uses the IEEE Link Layer Discovery Protocol (LLDP), plus the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot, and port.
The LinkRunner G2 displays critical nearest switch information include:
- Switch name and model
- Switch chassis, slot, and port
- Switch IP Address
- VLAN’s supported
- Duplex and speed (actual and advertised)
- Signal strength
- Connection (MDI or MDI/X)
- PoE voltage and power (actual and test limit)
TruePower PoE Loaded Test
LinkRunner G2 is the first field tester able to validate loaded PoE performance by drawing actual power up to 802.3bt 90W across all four pairs. Load the circuit to stress switches, cabling, and patch panels, all while measuring the voltage and pairs being used. Using the TruePower test to validate the power delivery before installing IoT connected devices ensures a smooth deployment and helps to alleviate finger-pointing.
NetAlly LinkRunner G2:
Why I Like LinkRunner G2 with Mike Pennachi
Get Answers Fast with AutoTest
The LinkRunner G2 Li-ION battery can be charged via PoE and can power up in standby mode within a second. Enhanced, user-defined AutoTest can perform a required set of connectivity tests within seconds. The LinkRunner G2 Smart Network Tester enables you to quickly and accurately validate network health, and solve problems fast.
- PoE loaded test up to 90W
- Link speed and duplex (actual and advertised)
- RX pair, polarity, and signal level
- 802.1x authentication
- Discover the nearest switch/slot/port and Data/Voice VLAN
- DHCP discovery with vendor classification ID and Option 60 and 150 response, and show subnet and DHCP server addresses
- Gateway and DNS server availability and responsiveness
- Ping or TCP port connectivity tests to an unlimited number of user-defined targets
LinkRunner G2 AutoTest
Packet Reflector
The LinkRunner G2 packet reflector mode can be used as a remote device during end-to-end network path performance tests to validate LAN and WAN throughput capabilities up to 1Gbps.
LinkRunner G2 supports packet reflection for:
- OptiView® XG Network Analysis Tablet
- OneTouch™ AT Network Assistant
VLAN Monitor & Packet Capture
The LinkRunner G2 can monitor and show traffic distribution of the top 9 VLANs and capture 2GB of packets at line-rate.
Benefits of Android OS
Eliminate Security Risk of Using Personal Devices
Many technicians today use their personal mobile device on the job to access vendor apps, check trouble tickets, look up technical documents, calculate IP address ranges, configure network equipment, and more. However, the use of a personal device for job-related tasks could be considered a security risk. In addition, it may have only limited access to network infrastructure information (if connected to a guest VLAN, for example).
But the mobile device has no ability to validate wired Ethernet infrastructure – it cannot test PoE, cabling, link negotiation or network services. While it features Wi-Fi and Bluetooth connectivity, many networked end-point devices do not support these connection methods. So multiple tools are needed.
Workflow Efficiency Gains
Imagine how much time it would save to have a single device that could:
- Receive a trouble ticket
- View .pdf documents
- Verify network services via AutoTest
- Automatically document test results
- Do all things Wi-Fi and Bluetooth that you can do with your personal mobile device with the optional Edimax 2 Wi-Fi/Bluetooth USB Adapter
- On-board camera to document installed devices, scan QR/barcodes, etc.
- Configure any IoT device that supports an Android app or web connection via Chrome browser
- Use Android apps to do things like:
- Configure an IoT device (security camera, AP, lighting, HVAC)
- Telnet into a switch
- Run a speed test
- Access an IP calculator
- View info provided by a Bluetooth-supported sensor
- Plug in a USB printer and along with the companion Android app, print labels
- Get help – start a webex, invite others and share your screen enabling quick assistance without unnecessary downtime
Endless Possibilities
The possibilities are endless as the world of smart devices goes. Apps are available for virtually anything you need to do. Visit https://link-live.com/public/apps to see the current list of readily available free apps.
Button and port functions
What's in the Box?
- LinkRunner G2 with Li-ion battery
- Power supply with regional power plugs
- WireView Cable ID #1 - 6
- Inline RJ-45 coupler
- USB 2.0 to Micro USB cable
- 8 G Micro SD card
- Holster
- Accessories pouch
- Medium Soft Case
- Getting Started Guide
LinkRunner G2 Smart Network Extended Test Kit
Automated Test Results Management to Link-Live Cloud Service
Serving as a centralized test results and device management system, the complimentary Link-Live cloud service transforms team workflows with the ability to quickly and easily log, document, and report test activity from all LinkSprinter, LinkRunner AT, LinkRunner G2, AirCheck G2, and OneTouch AT hand-held network testers. Once the instrument is connected to the Link-Live Cloud Service, your test results are automatically uploaded to the dashboard for project management and reporting. You have the option of uploading additional files, screenshots, images, profiles, packet captures, location information, and comments anytime. Also, certain NetAlly instruments with AllyCare Support can receive firmware updates “over the network” from Link-Live as they become available.
An API is available to retrieve and integrate data from Link-Live into other management platforms, such as your trouble-ticket application or network management system. This gives you the ability to easily provide proof-of-performance and better manage jobs and staff efficiency.
Return Policy |
Time to Return |
|
Standard Return Policy |
We offer a hassle-free 30-day returns policy for domestic (US) orders, excluding non-refundable items. Refund or Replacement within 30 days of the delivery date. All products that fall under the Standard Return Policy qualify for our 30-Day Hassle-Free Returns. Please see the section above for more details. |
|
Replacement Only Return Policy |
Replacement within 30 days of the delivery date. |
|
Manufacturer Only Return Policy |
Covered by the manufacturer's warranty. Please refer to the terms and conditions for the manufacturer's warranty or contact the manufacturer. |
|
Holiday Extended Return Policies |
Extended Holiday Return Policy.Qualifying purchases of products displaying the " Extended Holiday Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Refund or Replacement until January 31, 2024. Extended Holiday Replacement-Only Return PolicyQualifying purchases of products displaying the " Extended Holiday Replacement-Only Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Replacement until January 31, 2024. |
Zubehör
