Tripp Lite NPOE-SPL-G-5VMU - PoE til USB Micro-B og RJ45 Aktiv Splitter 5V DC Strøm 328 ft Driftsafstand
Tripp Lite NPOE-SPL-G-5VMU - PoE til USB Micro-B og RJ45 Aktiv Splitter 5V DC Strøm 328 ft Driftsafstand
Tripp Lite NPOE-SPL-G-5VMU
- Free Shipping
- 1 År Garanti
- 30 dages returret
- Kulstofneutral.
Produktets nøglefunktioner
- Leverer strøm og data via Cat5e/6-kabel op til 100 meter til netværksudstyr på kanten
- Forlæng 5VDC-strøm til enhver netværksenhed installeret, hvor der ikke er nogen AC-stikdåse tilgængelig
- Understøtter Gigabit Ethernet-datastrømme med hastigheder op til 1000 Mbps (1 Gbps)
- Designet til PoE-enheder som trådløse adgangspunkter og sikkerhedskameraer
- Hurtig og nem plug-and-play installation uden nødvendig konfiguration
- 3-års begrænset garanti
timer
minutter
Forsendelsesoplysninger
Tripp Lite
NPOE-SPL-G-5VMU
Funktioner
Del dit PoE-signal i separate strømaftag og Ethernet-forbindelser til edge-netværk
Tilslut NPOE-SPL-G-5VMU PoE (Power over Ethernet) splitter til dit edge-netværk op til 328 fod (100 meter) fra en PoE-switch eller 48V injektor. Splitteren adskiller strøm- og datasignalerne og leverer 5V 1A (5W) strøm til USB Micro-B-stikket og 10/100/1000 Mbps til RJ45 datastikket. Dette giver dig mere fleksibilitet til at placere enheder i områder, hvor en AC-stikdåse ikke er tilgængelig, og hvor det er for dyrt eller upraktisk at installere.
Understøtter Power over Ethernet for at spare penge og give dig flere installationsmuligheder
Denne PoE-splitter leverer strøm (gennem sin USB-forbindelse) til at drive ikke-PoE-udstyr, såsom sikkerhedskameraer, VoIP-telefoner og trådløse adgangspunkter (WAP). Dette sparer dig for udgiften og bestræbelserne ved at købe, tilslutte og installere individuelle strømadaptere til hver enhed. Det hjælper også med at installere enheder i områder langt væk fra AC-stikdåser, såsom på stolper eller lofter. NPOE-SPL-G-5VMU understøtter et bredt udvalg af indgangsspændinger fra 36VDC til 57VDC og har en fast USB-udgang på 5VDC.
Enkel plug-and-play-installation med splitteren tilsluttet på få minutter
Ingen konfiguration eller software er nødvendig for at tilføje NPOE-SPL-G-5VMU til dit LAN. Den overholder 802.3af (PoE), 802.3 (Ethernet), 802.3u (Fast Ethernet) og 802.3ab (Gigabit Ethernet) standarder.
Typiske anvendelser
- Installer en Alexa-aktiveret enhed eller VoIP-telefon i et område uden en standard strømforbindelse
- Udfyld Wi-Fi-dødezoner på dit kontor med et trådløst adgangspunkt tilsluttet dit LAN
- Opsæt digital skiltning i et indkøbscenter, arena, kontorbygning eller teater
- Forbind sikkerhedskameraer og andet A/V-overvågningsudstyr i en videovæg
Systemkrav
- IEEE 802.3af/at-kompatibel PoE-injektor eller switch
- Eksisterende eller nyinstallerede Cat5e/6/6a kabler
- En netværksenhed med en 5V 1a USB Micro-B strødoport
Active Splitter Adapts PoE Power and Data for a Non-PoE Edge Network Device
Tripp Lite’s NPOE-SPL-G-5VMU splitter takes a signal from a Cat5e/6 PoE cable and separates it into power and data signals, which it delivers to a network device via Micro USB-B and RJ45 plugs, respectively. By eliminating the need for a separate AC power source, it adds more placement options for non-PoE devices.
Typical Applications
- Deliver power and exchange data with an IP camera, Raspberry Pi sensor or other IoT device
- Add new equipment to an existing Cat5e/6 edge environment where AC outlets are unavailable, without needing a costly electrical upgrade
- Add Wi-Fi coverage to dead spots in an office with wireless access points (WAPs)
Gigabit Ethernet
10/100/1000 Mbps Ethernet allows IoT, edge and other network smart devices to send and receive data at high speeds. NPOE-SPL-G-5VMU complies with 802.3af (PoE), 802.3 (Ethernet), 802.3u (Fast Ethernet) and 802.3ab (Gigabit Ethernet) standards.
USB Micro-B Plug for Power
Power devices on the edge of your network, up to 328 ft. (100 m) from a PoE switch or 48V PoE injector, without requiring a costly electrical installation. The NPOE-SPL-G-5VMU delivers up to 5V 1A (5W) power to a device with a USB Micro-B port where AC outlets are limited or non-existent.
Ready to Use Right Out of the Package
With no software or drivers required, the NPOE-SPL-G-5VMU is completely plug and play. Simply connect a Cat5e/6 PoE cable to its RJ45 port, then connect the splitter’s RJ45 plug to your network device’s RJ45 port (data) and connect the splitter’s USB Micro-B plug to your network device’s USB Micro-B port (power).
Why Choose Tripp Lite?
Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, connect and protect your equipment. With a large selection of connectivity products, Tripp Lite has everything from USB hubs and reversible USB cables to fiber-optic cables and over Cat5e/Cat6 signal extenders. Whether you need to connect high-speed networks to switches, routers and servers in your data center, or send high-resolution video signals to displays and digital signs, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With over 90 years of quality products and service, Tripp Lite is a brand you can trust.
Return Policy |
Time to Return |
Standard Return Policy |
We offer a hassle-free 30-day returns policy for domestic (US) orders, excluding non-refundable items. Refund or Replacement within 30 days of the delivery date. All products that fall under the Standard Return Policy qualify for our 30-Day Hassle-Free Returns. Please see the section above for more details. |
Replacement Only Return Policy |
Replacement within 30 days of the delivery date. |
Manufacturer Only Return Policy |
Covered by the manufacturer's warranty. Please refer to the terms and conditions for the manufacturer's warranty or contact the manufacturer. |
Holiday Extended Return Policies |
Extended Holiday Return Policy.Qualifying purchases of products displaying the " Extended Holiday Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Refund or Replacement until January 31, 2024. Extended Holiday Replacement-Only Return PolicyQualifying purchases of products displaying the " Extended Holiday Replacement-Only Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Replacement until January 31, 2024. |