Tripp Lite PDUMH15HVAT PDU 10-Outlet Power Distribution Unit 2400W 230V AC Tripp Lite PDUMH15HVAT PDU 10-Outlet Strømfordelingsenhed 2400W 230V AC
Tripp Lite PDUMH15HVAT PDU 10-Outlet Power Distribution Unit 2400W 230V AC Tripp Lite PDUMH15HVAT PDU 10-Outlet Strømfordelingsenhed 2400W 230V AC
Tripp Lite PDUMH15HVAT
- Free Shipping
- 1 År Garanti
- 30 dages returret
- Kulstofneutral.
Produktets nøglefunktioner
- Primære og sekundære indgange til strømredundans
- Muliggør redundant strøm til netværksenheder med ikke-redundante strømforsyningskonfigurationer
- Dobbelt 3,6 m indgangskabler med IEC-320 C14 stik tilsluttes separate primære og sekundære enfasede strømkilder
- 10 C13 udgange
- Automatisk overførselsskift
timer
minutter
Forsendelsesoplysninger
Tripp Lite PDUMH15HVAT PDU 10-Outlet Power Distribution Unit 2400W 230V AC Tripp Lite PDUMH15HVAT PDU 10-Outlet Strømfordelingsenhed 2400W 230V AC
Tripp Lite PDUMH15HVAT
- Free Shipping
- 1 År Garanti
- 30 dages returret
- Kulstofneutral.
timer
minutter
Forsendelsesoplysninger
Produktets nøglefunktioner
- Primære og sekundære indgange til strømredundans
- Muliggør redundant strøm til netværksenheder med ikke-redundante strømforsyningskonfigurationer
- Dobbelt 3,6 m indgangskabler med IEC-320 C14 stik tilsluttes separate primære og sekundære enfasede strømkilder
- 10 C13 udgange
- Automatisk overførselsskift
Tripp Lite
PDUMH15HVAT
PDUMH15HVAT 2-2.4kW enkeltfase 200-240V ATS/målt PDU muliggør redundant strøm til netværksenheder med ikke-redundante strømforsyningskonfigurationer. Ideel til datacentre og serverrum, den monteres i 1U plads i EIA-standard 19-tommer racks og har 10 C13 stik.
Dobbelt 3,6 meter indgangsledninger med IEC-320 C14 stik forbindes til separate primære og sekundære enkeltfase strømforsyningskilder i et nominelt spændingsområde fra 200-240V. Stiklåseindsatser forhindrer kabler i at frakobles ved et uheld. PDUMH15HVAT evaluerer konstant strømkvaliteten fra begge indgangskilder. Dynamisk solid-state (TRIAC) automatisk overførsel af strømforsyning muliggør, at PDU'en skifter til den sekundære kilde inden for 2-5 millisekunder i tilfælde af, at den primære kilde svigter eller bliver ustabil for at sikre, at dit tilsluttede udstyr fungerer uden afbrydelse.
Indbygget slot understøtter den valgfri SNMPWEBCARD og WEBCARDLX (sælges separat), som gør PDUMH15HVAT til en styret PDU ved at muliggøre fjernadgang til PDU'en for strømovervågning, konfiguration, stikstyring og meddelelser via webbrowser, SSH, telnet eller SNMP. Digitalt amperemeter overvåger den samlede udgangsstrøm. LED'er viser stik on/off status og indgangsstrømstatus på primære og sekundære indgange.
```1U Rack-Mount TAA-Compliant 2–2.4kW 200–240V Single-Phase ATS/Metered PDU
Tripp Lite’s PDUMH15HVAT distributes, monitors and manages power in data centers, server rooms and other high-tech IT and industrial environments. It features 10 unswitched C13 outlets, as well as a built-in slot for optional network accessory cards that allow full remote power monitoring and control via secure network or web browser. It mounts in 1U of space in EIA-standard 19-inch racks.
Typical Applications
- Provide 200–240V power for up to 10 devices
- Provide a redundant power option for single-corded devices
- Simplify rack setups with organized power distribution
- Monitor and manage power to connected equipment
Primary and Secondary Inputs for Power Redundancy
Primary and Secondary Inputs for Power Redundancy The PDUMH15HVAT enables redundant power for network devices with non-redundant power supply configurations. Dual 3.6-meter input cords with IEC 320 C14 plugs connect to separate primary and secondary single-phase power sources in a nominal voltage range from 200–240V. The PDUMH15HVAT constantly evaluates the power quality of both input sources. Plug-lock inserts prevent cords from accidental disconnection.
Switches to Secondary Power Source in Milliseconds
Dynamic solid-state (TRIAC) automatic transfer switching allows the PDUMH15HVAT to switch to the secondary source within 2–5 milliseconds should the primary source fail or become unstable to ensure your connected equipment operates without interruption. A built-in processor monitors both sources and prevents switching if the secondary source is unavailable or of lower quality than the primary source.
Check Essential Functions at a Glance
A digital ammeter monitors total output current. LEDs display outlet on/off status and input power status on primary and secondary inputs.
Advanced Network Monitoring Options
A built-in card slot supports the optional SNMPWEBCARD and WEBCARDLX accessory cards (sold separately). When installed, they turn the PDUMH15HVAT into a switched PDU by allowing remote access for power monitoring, configuration, outlet control and notifications via web browser, SSH, Telnet or SNMP. This PDU supports a user-programmable startup of outlets in any order or interval to ensure network items are turned on in the proper sequence and reliably discovered.
Tripp Lite PDUMH15HVAT Product Summary
- Distributes,monitors and manages power in data centers, server rooms and other high-techenvironments
- Single-phase IEC 320 C14 primary and secondary inputs
- 10 unswitched C13outlets
- Automatictransfer switching within 2–5 ms
- Optional Ethernetnetwork accessory card slot for remote access
- Easy-to-readammeter displays total current used by connected equipment
- 1U rack-mountinstallation
- Compliant withthe Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Return Policy |
Time to Return |
Standard Return Policy |
We offer a hassle-free 30-day returns policy for domestic (US) orders, excluding non-refundable items. Refund or Replacement within 30 days of the delivery date. All products that fall under the Standard Return Policy qualify for our 30-Day Hassle-Free Returns. Please see the section above for more details. |
Replacement Only Return Policy |
Replacement within 30 days of the delivery date. |
Manufacturer Only Return Policy |
Covered by the manufacturer's warranty. Please refer to the terms and conditions for the manufacturer's warranty or contact the manufacturer. |
Holiday Extended Return Policies |
Extended Holiday Return Policy.Qualifying purchases of products displaying the " Extended Holiday Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Refund or Replacement until January 31, 2024. Extended Holiday Replacement-Only Return PolicyQualifying purchases of products displaying the " Extended Holiday Replacement-Only Return Policy ", from November 1st, 2023 to December 25, 2023, are eligible for a Replacement until January 31, 2024. |