The PDUMH20NET2LX 1.9kW Single-Phase Switched PDU provides advanced network control and remote power monitoring with the ability to turn on, turn off, reboot or lock out power to each outlet. By reducing the frequency of on-site visits, these advanced remote capabilities can save you money and reduce downtime.The 1U PDU features eight switched NEMA 5-15/20R outlets with an included cord retention bracket to prevent cables from becoming accidentally disconnected. A 12-foot cord with NEMA L5-20P plug and 5-20P plug adapter connects the PDU to a compatible AC power source, generator or protected UPS.The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.A digital ammeter allows you to monitor the total load in real time to ensure it remains well below maximum capacity with no danger of overload. The single-phase PDU installs in 1U of space in EIA-standard 19-inch racks. You can also mount it vertically in 0U of rack space or on a wall or under a counter with the included brackets and user-supplied screws. Features Distributes, Monitors and Manages Network-Grade AC Power 1.9kW 120V switched PDU with single-phase input Recommended for network applications requiring individual outlet control, load shedding and remote monitoring of critical network components NEMA L5-20P plug with 12 ft. cord and 5-20P plug adapter connects to compatible AC power source Firmware upgrades support future product enhancements Digital ammeter reports total PDU load in real time 8 Switched NEMA 5-15/20R Outlets Distribute AC Power Individual outlets can be remotely controlled to power up, power down, reboot or lock out devices Cord retention bracket prevents cables from becoming accidentally disconnected Individual LEDs indicate which outlets are live Built-In LX Platform Interface Allows full remote access for power monitoring with email notifications via secure web browser, SNMP, telnet or SSH Supports 10/100 Mbps auto-sensing for communication with an Ethernet network Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities No Java required Broad Communications Compatibility Supports IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP Supports automatic and manual assignment of IP address Essential Safety Features Tiered access allows administrator and guest to log in via web browser Immediate alert notifications via email or SNMP traps Supports user-specified alarm notification thresholds Real-time clock backup maintains day/date even if PDU is unpowered Flexible Mounting Options Included rack-mounting brackets compatible with front- or rear-facing installation Compatible with 1U horizontal, 0U vertical, wall and under-counter mounting with included brackets and user-supplied screws

In stock

The PDUMH32HVATNET 7.4kW Single-Phase 230V ATS/Switched PDU provides remote power monitoring and enables redundant power for network devices with non-redundant power supply configurations. Ideal for data centers and server rooms, it mounts in 2U of space in EIA-standard racks and features 18 switched outlets(16 C13 and two C19) in two load banks, each bank protected by a 20A circuit breaker.Dual 3-meter input cords with IEC309 32A Blue(2P+E) plugs connect to separate primary and secondary single-phase 230V power sources. The PDU constantly evaluates the power quality of both input sources. Dynamic solid-state(TRIAC) automatic transfer switching allows the PDU to switch to the secondary source within 1-5 milliseconds should the primary source fail or become unstable to ensure your connected equipment operates without interruption.Built-in Ethernet network interface allows remote access to the PDU for power monitoring, configuration, control and notifications via web browser, SSH, telnet or SNMP. Provides real-time load/current data with billing-grade accuracy(+/- 1 percent). Supports user-programmable startup of outlets in any order or interval to ensure network items are turned on in the proper sequence and reliably discovered. Digital LED display indicates power availability, voltage, source A/B input status, output load and power factor, as well as temperature and humidity with the optional ENVIROSENSE module(sold separately).

In stock

The PDUMV20HVNETLX 3.2-3.8kW Single-Phase Switched PDU provides advanced network control and remote power monitoring with the ability to turn on, turn off, reboot or lock out power to each outlet. Recommended for any IT or industrial application, it features 24 switched outlets (20 C13 and 4 C19) with included plug-lock insert sleeves to prevent cables from becoming accidentally disconnected. A 10-foot cord with NEMA L6-20P plug connects the PDU's C20 inlet to a compatible AC power source, generator or protected UPS.The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. A digital ammeter allows you to monitor each bank's load in real time to ensure it remains well below maximum capacity with no danger of overload. The vertical PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.

In stock

The PDUMV15NETLX 1.4kW Single-Phase Switched PDU provides advanced network control and remote power monitoring with the ability to turn on, turn off, reboot or lock out power to each outlet. Recommended for IT and industrial applications, the vertical PDU features 16 switched NEMA 5-15R outlets with included cord retention brackets to prevent cables from becoming accidentally disconnected. A 10-foot cord with NEMA 5-15P plug connects the PDU to a compatible AC power source, generator or protected UPS. The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. A digital ammeter allows you to monitor the total load in real time to ensure it remains well below maximum capacity with no danger of overload. The vertical PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.

In stock

UPS Connectivity Device Certified to Strict UL Cybersecurity StandardsThe INDGW-M2 Gigabit Industrial Gateway Mini-Slot card meets both UL 2900-1 and IEC 62443-4-2 cybersecurity standards, empowering IT professionals with superior Gigabit speed, capabilities and features, while ensuring the highest level of defense against emerging cybersecurity threats. Security enhancements include strong encryption, configurable password policy and usage of CA and PKI signed certificates. This network interface is recommended for use with better performing, cost-effective and widely deployed Gigabit network switches.Compatible with Eaton Intelligent Power ManagerINDGW-M2 works with IPM v1.61 and higher to improve business continuity by triggering policies configured to keep mission-critical applications running in case of power or environmental anomalies, including virtual machine relocation or automated disaster recovery action.Enables Remote UPS ManagementINDGW-M2 combines the features of an SNMP agent, HTTP/web server and Modbus card to facilitate remote monitoring of your UPS system. It enables remote management of a UPS through load shedding and safe shutdowns and reboots protected devices attached to load segments. It monitors site electrical data, UPS self-test logs, alert logs and logged power events like blackouts, brownouts and overvoltage conditions. You can receive alert notifications via email or SMS. Real-time clock links to a Network Time Protocol (NTP) server to maintain current day and date even after a UPS shutdown.Supports Multiple ProtocolsThis network interface provides versatile support through IPv4, IPv6, HTTPS, TLS 1.2, SNMPv1, SNMPv3, NTP, TFTP, SMTP, SMTPS, BOOTP, DHCP, SLAAC, SSH, MQTTS, Modbus TCP, Modbus RTU, BACnet IP and BACnet BBMD. It also supports Google Chrome and Mozilla Firefox web browsers. DHCP/Manual configuration support enables automatic or manual assignment of network settings.Optional Sensor Monitors Environmental ConditionsThe EMPDT1H1C2 Environmental Monitoring Probe (EMP) Gen 2 (sold separately) provides remote temperature and humidity monitoring, as well as a dry contact interface to monitor alarm, security and telecom devices. You can daisy-chain up to three EMPDT1H1C2 probes to a host, allowing multiple sensor connections. The probe is compatible with INDGW-M2 and Eaton rack PDUs, including G3 (firmware 4.x or later), G3HD and G3+ models.

In stock

Buffalo's LinkStation 210 provides easy to use shared storage and backup for all PC and Mac computers, tablets and smartphones on your home network. Simply connect it to your wireless router for access anywhere in your home. While on the go, Buffalo's WebAccess service allows you to create a free personal cloud for easy remote access anytime, anywhere over the Internet, and even on your iPhone, iPad and Android devices. With LinkStation 210, you can back up multiple computers simultaneously and enjoy uninterrupted access to terabytes of storage anytime, anywhere. More from the Manufacturer

In stock

Direct ConnectionAPC UPS Network Management Card 3 (NMC3) allows for secure remote monitoring and control of an individual APC UPS via a web browser, command line interface of SNMP. The configurable notification features keep you informed of problems as they occur. For protected servers, the included PowerchuteTM Network Shutdown software provides graceful, unattended shutdown in the event of a power outage (certified Vmware Ready, Nutanix Ready, Nutanix-AHV Ready).Remote UPS ManagementNetwork Management Card 3 Features EcoStruxure™ IT integration: Monitor and manage your equipment more efficiently. The vendor-neutral architecture delivers a new standard for proactive insights on critical assets of an IT environment. Network Management System (NMS) compatible: Make device information available to your preferred NMS by forwarding SNMP traps (events) or polling across SNMP (v1/v2c/v3) using the PowerNet MIB. Reboot Equipment Remotely: Quickly re-establish availability over your network and save dispatching technicians to remote locations. Smart Battery Management: Manage and maintain entire battery system with detailed battery information, even battery cartridge parameters, providing early fault warning. Flash Upgradeable Firmware: Convenient remote installation of UPS firmware updates. Powerchute Network Shutdown Software: Operating system shutdown with advanced integration support support for VMware® ESX/ESXi & Microsoft® Hyper-V and SCVMM. More from the Manufacturer

In stock

The Vertiv Liebert IntelliSlot RDU101 Network Card (RDU101) provides web access to Vertiv Liebert GXT5 UPS. This network card supports third-party protocols via SNMP for interfacing with building management or data center management system applications. This card employs Ethernet network to monitor and manage a wide range of operating parameters, alarms and notifications. It allows communication among Vertiv software such as Trellis Enterprise, Trellis Power Insight and LIFE Services. It offers real-time view of parametric data and system statuses. It also supports environmental monitoring via Liebert SN Sensors. The card delivers prompt alarm notifications via email and text messaging. It allows you to save time configuring and updating firmware on managed devices. It also keeps data secure through HTTPS web connectivity, SNMP v3 and remote authentication protocols | RADIUS, TACACS+, LDAP/AD and Kerberos. More from the Manufacturer More from the Manufacturer

In stock

The Vertiv Liebert IntelliSlot Unity-SNMP Network Card (IS-UNITY-SNMP) provides web access to Vertiv power and cooling equipment. This card supports third-party protocol (SNMP) for interfacing with building management or data center management system applications. This card employs Ethernet network to monitor and manage a wide range of operating parameters, alarms and notifications. It allows communication among Vertiv software such as Trellis, LIFE Services and Liebert Nform. It also offers quick, real-time view of parametric data and system statuses. The Vertiv Liebert IntelliSlot Unity-SNMP Network Card keeps data secure. Basic security is provided via HTTPS web connectivity and SNMP v3. It delivers immediate alarm notifications via email and text messaging. It allows you to save time configuring and updating firmware on managed devices. More from the Manufacturer More from the Manufacturer

In stock

Build a personal private cloud & home multimedia center with a built-in NPU to boost AI-powered face recognition Run your own personal cloud storage and enjoy easy file access, sharing, and syncing with the TS-133. Designed to enhance collaboration and increase remote work productivity, the TS-133 also features rich multimedia applications and provides a complete home entertainment portal. Centralized multimedia management Centrally store photos, music, and videos; easily browse, organize, and share multimedia files. AI-powered image recognition With a built-in NPU (Neural network Processing Unit) processor, the TS-133 boosts performance for high-speed face and object recognition. Home entertainment center Supports ARM NEON technology that accelerates video processing for a greater entertainment experience. Secure remote access myQNAPcloud allows you to easily access, manage, and share NAS files via the Internet. Snapshot protection against Ransomware Protect your files and data from accidental deletion and malware attacks by using advanced snapshot protection. Comprehensive security management Serves as a secure private cloud and supports user account protection, IP blocking, 2-step verification, encryption access, and more. Minimalist design The compact and slim TS-133 prioritizes a clean and essential design, and perfectly blends into your home or office. Effective cooling fan for heat flow The TS-133 is small in size and remains high-performance, cool, and quiet with an effective cooling fan. 64-bit Cortex-A55 quad-core 1.8 GHz CPU NAS for everyday use and collaboration Powered by a ARM® Cortex-A55 quad-core 1.8 GHz processor, built-in 2 GB RAM, one Gigabit LAN port, and supports one SATA 6Gb/s hard drive, the TS-133 provides dependable read/write performance for running various home and business NAS applications. The TS-133 features AES-NI 256 hardware-accelerated encryption for both full NAS volumes and shared folders, boosting system performance while securing sensitive data. NPU accelerates on-device AI performance. 6x Faster face recognition. With a built-in NPU (Neural network Processing Unit) processor, the TS-133 boosts QNAP AI Core (the AI-powered engine for image recognition) performance for high-speed face and object recognition. QuMagie Smart photo management The AI-powered QuMagie with intelligent face and object recognition brings you the ultimate photo management and sharing solution. Includes timeline scrolling, customizable folder covers, iOS® Live Photo display, a powerful search tool, and more.

In stock

Tripp Lite single phase Switched PDU / Power Distribution Unit offers advanced network control and monitoring with the ability to turn on, turn off, recycle or lock-out power to each individual receptacle, monitor site electrical conditions and remotely monitor output power consumption. Individually switched outlets can be controlled in real-time to remotely reboot unresponsive network hardware, or be custom programmed for user-defined power-up and power-down sequences to ensure proper startup of interdependent IT systems and prevent inrush-related overloads as network equipment is first energized. Unused PDU outlets can be electronically locked off to prevent the connection of unauthorized hardware. PDU output current consumption in amps is continuously displayed locally via visual meter and remotely via web/network interface to warn of potential overloads before critical IT mains or branch breakers trip. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.

In stock

The TLNETCARD turns a compatible* SmartPro or SmartOnline UPS with an accessory slot into a device you can manage on your network. By inserting the TLNETCARD into the slot and using an SNMP network management platform, web browser, SSH or Telnet, you can monitor and control the UPS in your server room, data center or network closet. The TLNETCARD's intuitive web interface does not require the Java Runtime Environment (JRE) Keep an eye on site electrical data, UPS device status and logged power-related events, such as blackouts, brownouts and overvoltages. Reboot locked network equipment remotely without disrupting power to other devices when using the TLNETCARD with controllable outlets or remotely switchable outlets available on select Tripp Lite UPS systems. Tiered access allows three levels of permissions to be assigned to users for monitoring or controlling the UPS. If an electrical or UPS-related problem occurs on-site, you'll be notified immediately via email or SNMP trap. The TLNETCARD lets you configure and schedule automatic UPS-driven actions, perform UPS-related tests and shutdowns, upgrade firmware and upload configurations from the web interface. Multiple protocols are supported, including IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv3, Telnet, SSH, FTP, DHCP, BOOTP and SCP. DHCP/manual configuration support enables network settings to be assigned automatically or manually.

In stock

The CyberPower PDU41102, a 24-outlet (front), 0U rackmount switched power distribution unit (PDU), provides 120V 30A output. It distributes power to 24 NEMA 5-20R receptacles from a single NEMA L5-30P plug with unfiltered electrical pass-through. The switched outlet receptacles can be managed individually or collectively over the network, using the CyberPower Management Console, a web browser, and the RJ45 Ethernet port for network connection, or locally by using the LCD controls. Outlets can be turned on, turned off, or cycled on demand or at programmed times to address a number of needs including remote rebooting of locked equipment, load shedding, power sequencing, and locking out unauthorized loads. The PDU41102 comes with a three-year limited warranty that covers defects in materials and workmanship in the product under normal use and conditions within three years of the purchase date.

In stock

The APC UPS Management Adapter - SmartSlot (AP9643) is the perfect solution for managing your SmartSlot UPS with ease. With its compatibility and easy installation, you can seamlessly integrate this adapter into your existing setup. The package includes everything you need, from the UPS Management Adapter itself to the Temperature Sensor, USB Cable, and User Manual. With support for protocols like HTTPS, Telnet, SSH, and SSL, you can securely monitor and manage your UPS. Keep track of important metrics and ensure the optimal performance of your UPS system. The proprietary SmartSlot design ensures a seamless connection and integration with your SmartSlot UPS. This adapter is designed to work flawlessly with your existing setup, providing you with the convenience and control you need. Whether you're a small business owner or a tech enthusiast, the APC UPS Management Adapter - SmartSlot (AP9643) is a must-have for anyone looking to optimize their UPS management. Take control of your UPS system and ensure its reliability and performance with this powerful adapter. Upgrade your UPS management today!

In stock

Buffalo's LinkStation 210 is an affordable and intuitive single-drive network storage device that comes equipped with a whole host of features, perfect for storing, sharing, serving and protecting your most important data. Backup multiple PCs and Mac computers simultaneously and enjoy uninterrupted access to terabytes of storage on your network and over the Internet. More from the Manufacturer

In stock